2 layers50.8 × 20.3 mm
LM2660M
Texas InstrumentsExtended
-40℃~+85℃ 1.5V~5.5V 100mA 120uA 5kHz、40kHz 6.5Ω 88% Inverted、boost converter SOIC-8 Charge Pumps ROHS
- Part id
- ti/LM2660M
- Category
- Charge Pumps
- Package
- SOIC-8
- Pins
- 8
- In stock
- 53 at JLCPCB (C132089)
- Used on
- 4 open-source boards
Overview
The LM2660M is a charge Pump made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+85℃ 1.5V~5.5V 100mA 120uA 5kHz、40kHz 6.5Ω 88% Inverted、boost converter SOIC-8 Charge Pumps ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LM2660MX_NOPB, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 53 are in stock at JLCPCB (part C132089). 4 open-source boards in 4 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | FC | Unspecified |
| 2 | CAP+ | Unspecified |
| 3 | GND | Unspecified |
| 4 | CAP− | Unspecified |
| 5 | OUT | Unspecified |
| 6 | LV | Unspecified |
| 7 | OSC | Unspecified |
| 8 | V+ | Unspecified |
Open-source boards using it
4- 2 layers100 × 87 mm
- 2 layers39.2 × 22.9 mm
Microwave Reciever
Multiscale-Metamaterial-Research-Lab/Optics-Table
Documentation for the 'Optics Table' and its development projects
15 partsMIT - 2 layers46 × 22 mm
Power Board
timohueser/MyoSense
As mentioned before the MyoSense Sensor Modules use dry stainless steel electrodes to pick up the small voltages generated by muscle activity on the skin above the monitored muscle.
26 partsGPL-3.0
Parts like it
8
MAX660ESA+T
SOIC-8-40℃~+85℃ -5.5V~-1.5V、9.35V 1.5V~5.5V 100mA 500uA 5kHz 6.5Ω 88% Inverted、Buck-Boost SOIC-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsLM2662MX
SOIC-8-40℃~+85℃ 10kHz 2.5V~5.5V 200mA 3.5Ω 800uA 86% Inverted、boost converter Not supported SOIC-8 Charge Pumps ROHSTexas InstrumentsCharge PumpsLM2662M
SOIC-8-40℃~+85℃ 10kHz 2.5V~5.5V 200mA 3.5Ω 800uA 86% Inverted、boost converter Not supported SOIC-8 Charge Pumps ROHSTexas InstrumentsCharge PumpsADM660ARZ-REEL7
SOIC-8-40℃~+85℃ -7V~-1.5V、5V~14V 1.5V~7V 100mA 25kHz 600uA 93% 9Ω Inverted、boost converter Not supported SOIC-8 Charge Pumps ROHSAnalog DevicesCharge PumpsMAX889TESA+T
SOIC-8-40℃~+85℃ -5.5V~-2.5V 2.7V~5.5V 200mA 2MHz 48mA 50mΩ Inverted SOIC-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsLM2660MX
SOIC-8-40℃~+85℃ 1.5V~5.5V 100mA 120uA 5kHz 6.5Ω 88% Inverted、boost converter SOIC-8 Charge Pumps ROHSTexas InstrumentsCharge PumpsMAX660CSA+T
SOIC-80℃~+70℃ 1.5V~5.5V 100mA 120uA 5kHz 6.5Ω 88% Inverted、boost converter SOIC-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge PumpsMAX889SESA+
SOIC-8-40℃~+85℃ -5.5V~-2.5V 12mA 1MHz 2.7V~5.5V 200mA 50mΩ Inverted SOIC-8 Charge Pumps ROHSMaxim Integrated (Analog Devices)Charge Pumps
Questions
Is there a KiCad symbol and footprint for the LM2660M?
Yes. The symbol is EasyEDA_Cloud:LM2660MX_NOPB and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the LM2660M?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the LM2660M datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the LM2660M?
JLCPCB lists it as part C132089, with 53 in stock; the sellers' links on this page open their listings.
What can replace the LM2660M?
Parts like it in the library: the MAX660ESA+T by Maxim Integrated (Analog Devices), the LM2662MX by Texas Instruments, the LM2662M by Texas Instruments and the ADM660ARZ-REEL7 by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the LM2660M?
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.