2 layers99.6 × 99.9 mm
Magloop pico
Greg-R/magloop_pico_pcb
Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
102 parts1GPL-3.0
2 layers99.6 × 99.9 mm
Magloop pico
Greg-R/magloop_pico_pcb_21Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
- Size
- 99.6 × 99.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 93
- Pads
- 327
- Tracks, vias
- 558, 203
- Pours
- 43
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Jan 2023
- Updated
- 24 Aug 2024
Overview
Magloop pico is an open-source printed circuit board by Greg-R, from the Greg-R/magloop_pico_pcb_2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.6 × 99.9 mm with 101 parts on 93 nets, routed with 558 tracks and 203 vias.
It is built around the LM358, LM7805 and B2B-XH-A(LF)(SN), with the MBR0520LT1G among its other parts. Its parts include 34 resistors, 29 capacitors, 12 transistors, 10 connectors and 8 diodes. It belongs with the RP2040 boards of this library.
Main components
4
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B2B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
MBR0520LT1G
UncategorisedUnknown maker
README
README.mdPrinted Circuit Board for Magnetic Loop Antenna Controller Version 2
Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
License
Please refer to the LICENSE file included in this repository.
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C4, C5, C6, C16, C17, C18, C21, C22, C23, C24, C25, C26, C27, C28, C29 +3 |
| 10 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R8, R15, R18, R21, R23, R27, R28, R31, R32 |
| 9 | NPN | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q6, Q7, Q8, Q9, Q11 |
| 6 | 470pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10, C11, C12, C13, C19, C20 |
| 4 | 10 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3, C14, C15 |
| 4 | 1N5711 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4, D7, D8 |
| 4 | 51.0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14, R16, R17 |
| 3 | 1N4004 | Diode_SMD:D_SMB | D1, D5, D6 |
| 3 | PMOS | Package_TO_SOT_SMD:SOT-23 | Q5, Q10, Q12 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R29, R30 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22, R24 |
| 2 | 24K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R33, R34 |
| 2 | 4.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R19, R20 |
| 2 | 51K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R25, R26 |
| 2 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J8, J10 |
| 2 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6, U7 |
| 1 | 0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 12V AUDIO MUTE | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J4 |
| 1 | 2.2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 2.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 200 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 24.9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12 |
| 1 | 390 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 43 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 5-1634513-1 | 5-1634513-1:TE_5-1634513-1 | J5 |
| 1 | 510 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 5V AUDIO MUTE | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J6 |
| 1 | 7.5K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 75 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | AD9850MODULE | AD9850:AD9850_MODULE | U1 |
| 1 | Conn_02x04_Odd_Even | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J9 |
| 1 | Conn_Coaxial_Power | Connector_BarrelJack:BarrelJack_CUI_PJ-036AH-SMT_Horizontal | J1 |
| 1 | ETHERNET | magloop_library:2-406541-3 | J2 |
| 1 | FerriteBead | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | LM4040DBZ-3 | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | MBR0520LT1G | digikey-footprints:SOD-123 | D2 |
| 1 | PI_PICO | PI_Pico:PI_PICO | U4 |
| 1 | POWER SW | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J3 |
| 1 | TMC2225_Module | TMC2209:TMC2209_MODULE | U2 |
| 1 | TO RF RELAY | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J7 |
Questions
How big is the Magloop pico PCB?
It measures 99.6 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magloop pico use?
101 parts, built around the LM358, LM7805, B2B-XH-A(LF)(SN) and MBR0520LT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magloop pico KiCad files?
From the Greg-R/magloop_pico_pcb_2 repository on GitHub, at the commit this page was made from: the board is magloop_pico.kicad_pcb and its schematic magloop_pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magloop pico design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers113 × 62.2 mm
FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0 - 2 layers206.2 × 138.1 mm
- 2 layers98.8 × 60.7 mm
PIC soldering station
wonbinbk/SSS
Smart Soldering Station - for fake Hakko 907, using PIC16f87xA, PID heat controller with auto-standby and auto-power-off.
76 parts4GPL-3.0 - 2 layers135.8 × 42.8 mm
- 2 layers108 × 57.5 mm
- 2 layers55 × 135.3 mm
MSG25
ZeniteSolar/MSG25
Módulo de sensoriamento geral para medição de 4 tensões e 3 temperaturas
131 parts - 4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0