2 layers99.6 × 99.9 mm
Magloop pico
Greg-R/magloop_pico_pcb_2
Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
101 parts1GPL-3.0
2 layers99.6 × 99.9 mm
Magloop pico
Greg-R/magloop_pico_pcb1Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
- Size
- 99.6 × 99.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 102
- Nets
- 94
- Pads
- 333
- Tracks, vias
- 552, 183
- Pours
- 41
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 May 2022
- Updated
- 23 May 2023
Overview
Magloop pico is an open-source printed circuit board by Greg-R, from the Greg-R/magloop_pico_pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.6 × 99.9 mm with 102 parts on 94 nets, routed with 552 tracks and 183 vias.
It is built around the LM358, LM7805 and B2B-XH-A(LF)(SN), with the MBR0520LT1G among its other parts. Its parts include 36 resistors, 29 capacitors, 12 transistors, 10 connectors and 7 ICs. It belongs with the RP2040 boards of this library.
Main components
4
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
B2B-XH-A(LF)(SN)
插件,P=2.5mm-25℃~+85℃ 1 1x2P 2 2.5mm 250V 2P 3A 5.75mm 7.4mm 7mm Brass K Pin PA66 Through Hole Tin UL94V-0 White XH 插件,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
MBR0520LT1G
UncategorisedUnknown maker
README
README.mdPrinted Circuit Board for Magnetic Loop Antenna Controller
Please note this repository is no longer active.
The new repository is here:
(https://github.com/Greg-R/magloop_pico_pcb_2)
Design and fabrication files the Magnetic Loop Antenna Controller printed circuit board.
License
Please refer to the LICENSE file included in this repository.
Parts
102| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4, C10, C13, C14, C15, C16, C17, C18, C20, C23, C24, C25, C28, C29 +3 |
| 13 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R26, R27, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40 |
| 9 | NPN | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q9, Q11 |
| 6 | 470pF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12, C21, C22, C26, C27 |
| 4 | 10 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C6, C7, C19 |
| 4 | 1N5711 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4, D5 |
| 4 | 51.0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R13, R14, R15, R16 |
| 3 | PMOS | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q8, Q10, Q12 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R24, R25 |
| 2 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20, R21 |
| 2 | 24K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28, R29 |
| 2 | 4.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18 |
| 2 | 51K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R22, R23 |
| 2 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2, J4 |
| 2 | LM358 | Package_DIP:DIP-8_W7.62mm | U7, U8 |
| 1 | 12V AUDIO MUTE | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J9 |
| 1 | 1N4004 | Diode_SMD:D_SMB | D6 |
| 1 | 2.2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 2.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 200 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 24.9 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10 |
| 1 | 390 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 43 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 5-1634513-1 | 5-1634513-1:TE_5-1634513-1 | J8 |
| 1 | 510 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 5V AUDIO MUTE | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J10 |
| 1 | 7.5K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 75 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | A4988_Module | magloop_pico:A4988_MODULE | U2 |
| 1 | AD9850MODULE | magloop_pico:AD9850_MODULE | U1 |
| 1 | Conn_02x04_Odd_Even | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical | J5 |
| 1 | Conn_Coaxial_Power | Connector_BarrelJack:BarrelJack_CUI_PJ-036AH-SMT_Horizontal | J1 |
| 1 | ETHERNET | magloop_library:2-406541-3 | J7 |
| 1 | FerriteBead | Inductor_SMD:L_1206_3216Metric | FB1 |
| 1 | LM4040DBZ-3 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U5 |
| 1 | LM7805 | Package_TO_SOT_THT:TO-220-3_Vertical | U3 |
| 1 | MBR0520LT1G | digikey-footprints:SOD-123 | D1 |
| 1 | PI_PICO | magloop_pico:PI_PICO | U4 |
| 1 | POWER SW | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J3 |
| 1 | SW_DIP_x03 | digikey-footprints:DIP-6_W7.62mm | SW1 |
| 1 | TO RF RELAY | digikey-footprints:PinHeader_1x2_P2.5mm_Drill1.1mm | J6 |
Questions
How big is the Magloop pico PCB?
It measures 99.6 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Magloop pico use?
102 parts, built around the LM358, LM7805, B2B-XH-A(LF)(SN) and MBR0520LT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Magloop pico KiCad files?
From the Greg-R/magloop_pico_pcb repository on GitHub, at the commit this page was made from: the board is magloop_pico.kicad_pcb and its schematic magloop_pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Magloop pico design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers113 × 62.2 mm
FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0 - 2 layers206.2 × 138.1 mm
- 2 layers98.8 × 60.7 mm
PIC soldering station
wonbinbk/SSS
Smart Soldering Station - for fake Hakko 907, using PIC16f87xA, PID heat controller with auto-standby and auto-power-off.
76 parts4GPL-3.0 - 2 layers135.8 × 42.8 mm
- 2 layers108 × 57.5 mm
- 2 layers55 × 135.3 mm
MSG25
ZeniteSolar/MSG25
Módulo de sensoriamento geral para medição de 4 tensões e 3 temperaturas
131 parts - 4 layers58.4 × 22.9 mm
Quickfeather board
QuickLogic-Corp/quick-feather-dev-board
100% open source dev kit for EOS S3 MCU+eFPGA SoC supported by fully open source SDK and FPGA Toolchain
101 parts66CC-BY-SA-4.0