2 layers90 × 50 mm
2 layers98.8 × 60.7 mm
PIC soldering station
wonbinbk/SSS4Smart Soldering Station - for fake Hakko 907, using PIC16f87xA, PID heat controller with auto-standby and auto-power-off.
- Size
- 98.8 × 60.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 76
- Nets
- 57
- Pads
- 209
- Tracks, vias
- 580, 14
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 13 Apr 2016
- Updated
- 19 Apr 2018
Overview
PIC soldering station is an open-source printed circuit board by wonbinbk, from the wonbinbk/SSS repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 98.8 × 60.7 mm with 76 parts on 57 nets, routed with 580 tracks and 14 vias.
It is built around the PIC16F876A-I/SP, LM358 and TMP101NA, with the LM7805, LM7812 and IRLR2908 among its other parts. Its parts include 27 resistors, 19 capacitors, 5 ICs, 5 diodes and 3 transistors. It belongs with the PIC boards of this library.
Main components
6
PIC16F876A-I/SP
PDIP-28-40℃~+85℃ 10bit 14KB 20MHz 22 256Byte 368Byte 4V~5.5V 8 Bit External FLASH PIC Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Built-in general-purpose timer PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
TMP101NA
SOT23-6-55°C to +125°C, ±3.0°C Accuracy, Digital Temperature Sensor with I2C InterfaceTexas InstrumentsUncategorised
LM7805
TO-2630℃~+125℃ 1 1A 20V 2V 42uV 5V 62dB@(120Hz) 8mA Fixed Over Temperature Protection、Short Circuit Protection Positive TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM7812
TO-263TO-263 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSYONGYUTAIUncategorised
IRLR2908
DPAK80V 30A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
Parts
76| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1.5K | Terminal_blocks:R1_vert | R1, R5, R13, R14, R15, R16, R17, R18, R19, R23, R24 |
| 11 | 104 | w_capacitors:cnp_3mm_disc | C1, C2, C3, C4, C6, C8, C10, C17, C18, C19, C20 |
| 4 | 10K | Terminal_blocks:R1_vert | R2, R4, R8, R25 |
| 4 | 22pF | w_capacitors:cnp_3mm_disc | C11, C13, C15, C16 |
| 3 | 0.1uF | w_capacitors:cnp_3mm_disc | C7, C9, C12 |
| 3 | 560 | Terminal_blocks:R1_vert | R9, R21, R22 |
| 2 | 10K | Terminal_blocks:RV_DIP_3pin_Small | RV1, RV2 |
| 2 | 4.7K | Terminal_blocks:R1_vert | R7, R11 |
| 1 | 1.5K | Terminal_blocks:R2_vert | R20 |
| 1 | 100K | Terminal_blocks:R1_vert | R27 |
| 1 | 100uF/ 25V | Terminal_blocks:C_Axial_D13_L21_P5 | C5 |
| 1 | 10K | Discret:R3 | R26 |
| 1 | 1K | Discret:R3 | R6 |
| 1 | 1K | Terminal_blocks:R1_vert | R3 |
| 1 | 2.7K | Terminal_blocks:R1_vert | R10 |
| 1 | 20Mhz | Crystals:Crystal_HC50-U_Vertical | X2 |
| 1 | 22R | Terminal_blocks:R1_vert | R12 |
| 1 | 24VAC | Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2pol | P1 |
| 1 | 2N3904 | Terminal_blocks:TO-92_Inline_Wide_Oval_pads | Q1 |
| 1 | 2N3906 | Terminal_blocks:TO-92_Inline_Wide_Oval_pads | Q2 |
| 1 | 32.768kHz | Crystals:Crystal_Round_Horizontal_3mm_BigPad | X1 |
| 1 | 5V_ON | LEDs:LED-3MM | D2 |
| 1 | BRIDGE-6A | Terminal_blocks:Diode_bridge_KPBC60xx | D1 |
| 1 | BUTTON1 | Terminal_blocks:PCB_PUSH_button | SW2 |
| 1 | BUTTON2 | Terminal_blocks:PCB_PUSH_button | SW3 |
| 1 | CA56-12 | Terminal_blocks:4DIGIT_LED_DISPLAY_5461BS | AFF1 |
| 1 | DC_INLET | Terminal_blocks:dc_socket | J1 |
| 1 | IRLR2908 | SMD_Packages_by_Karl:DPAK-3_GDS | Q3 |
| 1 | LED1 | LEDs:LED-3MM | D4 |
| 1 | LED2 | LEDs:LED-3MM | D5 |
| 1 | LM358 | SMD_Packages:SOIC-8-N | U1 |
| 1 | LM7805 | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal_Reverse_LargePads | U3 |
| 1 | LM7812 | TO_SOT_Packages_THT:TO-220_Neutral123_Horizontal_Reverse_LargePads | U2 |
| 1 | PIC16F876A | Housings_DIP:DIP-28_W7.62mm_LongPads | U5 |
| 1 | TMP101 | TO_SOT_Packages_SMD:SOT-23-6 | U4 |
| 1 | hakko 907 | w_conn_screw:mors_5p | K2 |
| 1 | heat_en | LEDs:LED-3MM | D3 |
The 69 most common of 76 parts.
Questions
How big is the PIC soldering station PCB?
It measures 98.8 × 60.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PIC soldering station use?
76 parts, built around the PIC16F876A-I/SP, LM358, TMP101NA and LM7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PIC soldering station KiCad files?
From the wonbinbk/SSS repository on GitHub, at the commit this page was made from: the board is Schematic and PCB/PIC soldering station.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PIC soldering station design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers130 × 100 mm
- 2 layers70 × 89 mm
- 2 layers167.6 × 97.5 mm
AS3397 proto DIP
PhysicsDptAngers/polyUAnalog
Open source, analog and polyphonic synthesizer
142 parts88MIT - 2 layers99.1 × 99.1 mm
Power supply panelized
thebiguno/microcontroller-projects
A home for a bunch of microcontroller projects which don't warrant their own repos.
223 parts75 - 4 layers150 × 100 mm
- 2 layers256.5 × 172.9 mm
- 2 layers99 × 96.5 mm
