Skip to the content

Boards using the TPS56339DDC

26 boards

Boards in 24 GitHub repositories, designed in KiCad, that use the TPS56339DDC by Texas Instruments (-40℃~+125℃@(TJ) 1 3A 4.5V~24V 500kHz 800mV~16V 98uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS). See how each wires it, with its parts, size, README and files; the TPS56339DDC’s symbol, footprint and pinout are on its own page.

  • 4 layers150 × 50 mmEmber, the printed circuit board in 3D

    Ember

    notaroomba/ember

    A custom hot plate powered by USB-C Power Delivery.

    136 parts25
  • 4 layers100 × 100 mmPlantomation V2, the printed circuit board in 3D

    Plantomation V2

    Synthron/Plantomation

    DIY plant watering system

    203 parts10
  • 2 layers95 × 35 mmSynth psu, the printed circuit board in 3D

    Synth psu

    mattvenn/usbc-synth-psu

    For build notes, problems and fixes, please check the project log

    91 parts2
  • 2 layers95 × 99 mmPolaris4.1, the printed circuit board in 3D

    Polaris4.1

    porbital/GNC_Hapsis

    Software for the GNC Hapsis launch structure control system

    95 parts2
  • 2 layersInter assignment, the printed circuit board in 3D

    Inter assignment

    Arpit192005/Buck-converter-using-TPS56339DDC

    12 parts1
  • 4 layers46 × 56 mmLINBoard HW, the printed circuit board in 3D

    LINBoard HW

    corygrant/LINBoard

    73 parts1
  • 4 layers101 × 51.5 mmQuack core, the printed circuit board in 3D

    Quack core

    HeyPCB/quack-core

    Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.

    138 parts1CERN-OHL-S-2.0
  • 2 layers304.3 × 274 mmRobotont electronics mainboard, the printed circuit board in 3D

    Robotont electronics mainboard

    robotont/robotont-electronics-mainboard

    Unified pcb design for the 3rd generation robotont robot.

    426 parts1
  • 2 layers85 × 38 mmSoraben, the printed circuit board in 3D

    Soraben

    danielkent-net/soraben

    Soraben - 3D Printer BentoBox Filter Companion

    49 partsCERN-OHL-S-2.0
  • 4 layers64 × 80 mmIris brainstem, the printed circuit board in 3D

    Iris brainstem

    HeyPCB/iris-brainstem

    Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.

    97 partsCERN-OHL-S-2.0
  • 4 layers128 × 51.4 mmQuack face, the printed circuit board in 3D

    Quack face

    HeyPCB/quack-face

    Face board for the Open Duck Mini's head: eye LEDs, projector driver, I2S amp and mic, antenna servos, shaped to the head. 4-layer KiCad 10 board plus printed standoffs, fit-checked in the head CAD.

    55 partsCERN-OHL-S-2.0
  • 2 layers76 × 76 mmNykuPCB, the printed circuit board in 3D

    NykuPCB

    Joaquinfu/NykuPCB-Project

    Kicad project for Nyku Robot to edit

    41 parts
  • 4 layers60 × 45 mmHotplate, the printed circuit board in 3D

    Hotplate

    Keyaan-07/Hotplate

    Check out the Project's files on KiCanvas(PCB and Heating element) and Onshape!

    85 partsMIT
  • 4 layers50 × 50 mmTrx, the printed circuit board in 3D

    Trx

    MTalon63/mobile-ground-station

    74 parts
  • 4 layers93.3 × 83.9 mmSd2-node board, the printed circuit board in 3D

    Sd2-node board

    noahwhite07/sd2-node-board

    45 parts
  • 2 layers40 × 88.6 mmMainboard.ai, the printed circuit board in 3D

    Mainboard.ai

    Richard-Rumpel/esp32-linefollower-pcb

    59 parts
  • 2 layers30 × 60 mmESP32 kicad project, the printed circuit board in 3D

    ESP32 kicad project

    shyver/custom-ESP32

    This project was prepared with manufacturability and assembly considerations in mind, despite being developed primarily as a portfolio and learning exercise.

    68 partsMIT
  • 2 layers80 × 66 mmLightlink, the printed circuit board in 3D

    Lightlink

    spstack/lightlink-remote-outlet

    Code and PCB designs for a device that can link a switched power outlet to any other outlet remotely.

    59 parts
  • 4 layers165 × 125 mmVersaTerm, the printed circuit board in 3D

    VersaTerm

    Synthron/VersaTerm

    Adaptation of https://github.com/dhansel/VersaTerm/tree/main

    125 parts
  • 2 layers65 × 65 mmRpi zero matrix driver, the printed circuit board in 3D

    Rpi zero matrix driver

    varsheim/rpi-zero-matrix-driver

    Raspberry PI breakout board to run my tesseract matrix

    120 partsMIT
  • 6 layers50 × 50 mmYTAR, the printed circuit board in 3D

    YTAR

    Zychlix/Termowizor2

    Wspaniałe zabawy nienaruszające żadnego prawa międzynarodowego

    241 parts
  • 2 layers58.4 × 61 mmTelemetry transmitter, the printed circuit board in 3D

    Telemetry transmitter

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    47 parts15GPL-3.0
  • 2 layers95 × 99 mmPolaris3.1, the printed circuit board in 3D

    Polaris3.1

    porbital/GNC_Hapsis

    Software for the GNC Hapsis launch structure control system

    74 parts2
  • 2 layers10 × 25 mmSY317, the printed circuit board in 3D

    SY317

    Synthron/SY317

    78xx compatible Switching Regulator

    17 parts1