

Wspaniałe zabawy nienaruszające żadnego prawa międzynarodowego
- Size
- 50 × 50 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 241
- Nets
- 313
- Pads
- 942
- Tracks, vias
- 2,463, 828
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Aug 2024
- Updated
- 21 Feb 2025
Overview
YTAR is an open-source printed circuit board by Zychlix, from the Zychlix/Termowizor2 repository on GitHub. It is a 6-layer board of 50 × 50 mm with 241 parts on 313 nets, routed with 2,463 tracks and 828 vias.
It is built around the STM32H750XBH6, MCP2562FDT-H/MF and TPS56339DDC, with the DM3AT-SF-PEJM5, DS90C124IVS/NOPB and IS42S32400F-6BL among its other parts. Its parts include 84 resistors, 71 capacitors, 6 ICs, 6 connectors and 5 diodes. It belongs with the STM32 boards of this library.
Main components
12STM32H750XBH6
TFBGA-265-40℃~+85℃ 1.62V~3.6V 128KB 12bit 168 16bit 1MB 32 Bit 480MHz ARM Cortex-M7 Built-in FLASH TFBGA-265 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)MCP2562FDT-H/MF
DFN-8-EP(3x3)-40℃~+150℃ 1 15uA 4.5V~5.5V 8Mbps CAN FD Transceiver DFN-8-EP(3x3) CAN Transceivers ROHSMicrochip TechnologyCAN TransceiversTPS56339DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 3A 4.5V~24V 500kHz 800mV~16V 98uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersDM3AT-SF-PEJM5
SMD-25℃~+85℃ 1.68mm Connector and Ejector MicroSD Card (TF Card) No Push-Push SMD SD Card / Memory Card Connector ROHSHirose ElectricSD Card / Memory Card ConnectorDS90C124IVS/NOPB
TQFP-48(7x7)1 24 3V~3.6V 840Mbps Deserializer TQFP-48(7x7) LVDS ICs ROHSTexas InstrumentsLVDS ICsIS42S32400F-6BL
TFBGA-90(8x13)0℃~+70℃ 128Mbit 166MHz 3V~3.6V High-speed clock synchronization、Auto precharge、Automatic column address generation、Auto refresh TFBGA-90(8x13) SDRAM ROHSISSISDRAMMLASE105SB7104KFNA01
0402Multilayer Ceramic Capacitors MLCC - SMD/SMTTaiyo YudenRT0402FRE0733RL
0402-55℃~+155℃ 33Ω 50V 63mW Thin Film Resistor ±1% ±50ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRT0402FRE0710KL
0402-55℃~+155℃ 10kΩ 50V 62.5mW Thin Film Resistor ±1% ±50ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountLMK105ABJ225KVHF
040210V 2.2uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMTRMC1/16SJPTH
04020402 Chip Resistor - Surface Mount ROHSWalsin TechnologyChip Resistor - Surface MountGRM21BC81C226ME44L
080516V 22uF X6S ±20% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
Parts
241| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C27, C28 +36 |
| 41 | ~ | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP10, TP11, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26, TP27, TP28 +25 |
| 39 | 33R | Resistor_SMD:R_0402_1005Metric | R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40 +23 |
| 26 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R5, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R23 +10 |
| 6 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C1, C2, C26, C54, C58, C71 |
| 5 | 0R | Resistor_SMD:R_0402_1005Metric | R66, R79, R82, R83, R84 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C62, C63, C65, C66 |
| 4 | 22u | Capacitor_SMD:C_0805_2012Metric | C60, C61, C69, C70 |
| 4 | 49R9 | Resistor_SMD:R_0402_1005Metric | R22, R24, R73, R75 |
| 4 | 5k1 | Resistor_SMD:R_0402_1005Metric | R67, R68, R71, R72 |
| 3 | 620R | Resistor_SMD:R_0402_1005Metric | R21, R62, R63 |
| 2 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C24, C25 |
| 2 | 8.2p | Capacitor_SMD:C_0402_1005Metric | C56, C57 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | H1, H2 |
| 2 | RESET | MEMS_Custom:JP_0402_OPEN | JP2, JP4 |
| 2 | SRN6028C-6R0M | Inductor_SMD:L_Bourns-SRN6028 | L1, L2 |
| 2 | TPS56339 | Package_TO_SOT_SMD:TSOT-23-6 | U5, U6 |
| 1 | 120R | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 18V | Diode_SMD:D_SOD-123 | D6 |
| 1 | 25MHz | Oscillator:Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm | Y1 |
| 1 | 3.6V | Diode_SMD:D_SOD-123 | D4 |
| 1 | 30k9 | Resistor_SMD:R_0402_1005Metric | R80 |
| 1 | 350mA | Fuse:Fuse_0805_2012Metric | F1 |
| 1 | 3V3 | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP13 |
| 1 | 3V3 | MEMS_Custom:JP_0402_OPEN | JP3 |
| 1 | 3V3 OUT | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP2 |
| 1 | 4.7n | Capacitor_SMD:C_0402_1005Metric | C55 |
| 1 | 52k3 | Resistor_SMD:R_0402_1005Metric | R76 |
| 1 | 5V | MEMS_Custom:JP_0402_OPEN | JP1 |
| 1 | 5V | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP12 |
| 1 | CAMERA | Connector_Hirose:Hirose_DF52-8S-0.8H_1x08-1MP_P0.80mm_Horizontal | J2 |
| 1 | CAN | MEMS_Custom:JP_0402_OPEN | JP5 |
| 1 | D1 | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP47 |
| 1 | D11 | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP51 |
| 1 | D2 | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP48 |
| 1 | D3 | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP49 |
| 1 | D4 | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP50 |
| 1 | DS90C124 | Package_QFP:TQFP-48_7x7mm_P0.5mm | U3 |
| 1 | FH12-40S-0.5SH(55) | Connector_FFC-FPC:Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal | J4 |
| 1 | GND | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP54 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | IO | Connector_Hirose:Hirose_DF52-8S-0.8H_1x08-1MP_P0.80mm_Horizontal | J6 |
| 1 | MCP2562-E-MF | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U2 |
| 1 | MODE | Button_Switch_SMD:SW_SPST_B3U-1000P | SW3 |
| 1 | Micro_Sd | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | ORANGE | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | PICTURE | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | Polyfuse-2A-1206L200SLYR | Fuse:Fuse_1206_3216Metric | F2 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | RESET | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | RX | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP52 |
| 1 | STDC14 | MEMS_Passive:IDC-Header_20021511-00014T4LF_2x07_P1.27_Vertical | J1 |
| 1 | STM32H750XBHx | Package_BGA:TFBGA-265_14x14mm_Layout17x17_P0.8mm | U1 |
| 1 | TX | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP53 |
| 1 | USB_C_USB4085-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J5 |
| 1 | VIN | MEMS_Custom:TestPoint_Pad_D0.6mm_SMT | TP14 |
| 1 | ~ | Package_BGA:BGA-90_8.0x13.0mm_Layout2x3x15_P0.8mm | U4 |
More from Zychlix/Termowizor2
2- 2 layers26 × 15 mm

- 2 layers

DISP ADAPTER
Zychlix/Termowizor2
Wspaniałe zabawy nienaruszające żadnego prawa międzynarodowego
2 parts
Similar boards
- 4 layers49 × 80 mm

70MHz Soil Sensor
jhns-de/70MHz-Soil-Sensor
Soil moisture and electrical conductivity (EC) sensor based on 70 MHz impedance measurement, developed as part of my master’s thesis.
130 parts2 - 4 layers27.5 × 35.8 mm

Robot cortex
Ocanath/robot-coprocessor-pcb
ESP32+STM32 Coprocessor. Standalone, with vendored PCB design out of the old coprocessor repository
91 parts - 4 layers56.6 × 39 mm

Multimodal Actuator mk2
TheUnknownAlias/betr_kicad_resources
This repository contains shared KiCad symbols and footprints for our projects.
91 parts - 2 layers43.2 × 17.8 mm

Arduino Nano
sabogalc/KiCad-Arduino-Boards
A collection of Arduino boards recreated from scratch in KiCad. Legacy USB connectors have been replaced with USB-C where applicable.
34 parts95WTFPL - 4 layers54 × 50 mm

Reworkctf v2
azonenberg/reworkctf
This is a points-based challenge board intended for practicing of PCB rework and circuit editing skills. This is not a circuit debug challenge.
131 parts34BSD-3-Clause - 8 layers126 × 117 mm

- 4 layers48 × 45.5 mm

Stm32h750-expansion
azonenberg/efinix-tests
Miscellaneous experiments with Efinix FPGAs
73 parts1BSD-3-Clause - 4 layers130 × 125 mm

Flatburn V5
MIT-Senseable-City-Lab/flatburn-lte
Part of the City Scanner project at MIT Senseable City Lab, Flatburn is an open-source, solar-powered, modular sensing platform that can be easily deployed on road vehicles to collect various environmental data.
587 parts1MIT
Questions
How big is the YTAR PCB?
It measures 50 × 50 mm and has 6 copper layers, 1.6 mm thick.
What parts does the YTAR use?
241 parts, built around the STM32H750XBH6, MCP2562FDT-H/MF, TPS56339DDC and DM3AT-SF-PEJM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the YTAR KiCad files?
From the Zychlix/Termowizor2 repository on GitHub, at the commit this page was made from: the board is YTAR/YTAR.kicad_pcb and its schematic DISP_ADAPTER/DISP_ADAPTER.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the YTAR design in my own project?
Its repository states no licence, so its author keeps all rights: ask Zychlix before reusing the design.