

NykuPCB
Kicad project for Nyku Robot to edit
- Size
- 76 × 76 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 34
- Pads
- 134
- Tracks, vias
- 242, 0
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Jul 2026
- Updated
- 15 Jul 2026
Overview
NykuPCB is an open-source printed circuit board by Joaquinfu, from the Joaquinfu/NykuPCB-Project repository on GitHub. It is a 2-layer board of 76 × 76 mm with 41 parts on 34 nets, routed with 242 tracks and 0 vias.
It is built around the TPS54560BDDA, TPS56339DDC and B560. Its parts include 14 capacitors, 9 connectors, 7 resistors, 2 ICs and 2 inductors.
Main components
3TPS54560BDDA
ESOP-8-40℃~+150℃@(TJ) 1 146uA 4.5V~60V 500kHz 5A 800mV~58.8V Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS56339DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 3A 4.5V~24V 500kHz 800mV~16V 98uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersB560
SMCSMC New Arrivals ROHSDiodes IncorporatedUncategorised
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 47uF | Capacitor_SMD:C_1210_3225Metric | C1, C8, C10, C11, C12 |
| 4 | 100nF | Capacitor_SMD:C_1210_3225Metric | C4, C9, C13, C14 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R2, R4, R8 |
| 2 | , | ||
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C7 |
| 2 | Barrel_Jack | Connector_BarrelJack:BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J3, J4 |
| 1 | .1uF | Capacitor_SMD:C_1210_3225Metric | C3 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 10uH | Inductor_SMD:L_12x12mm_H8mm | L2 |
| 1 | 140k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 30 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4.7uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 52.3k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | B560 | Diode_SMD:D_SMC | D1 |
| 1 | Conn_01x02_Pin (XT60) | Connector_AMASS:AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal | J2 |
| 1 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J5 |
| 1 | I2C/power cluster, | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Maestro_Jumpers | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J11 |
| 1 | Panel_Switch_15A | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | SW1 |
| 1 | TPS54560BDDA | Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U4 |
| 1 | TPS56339DDC | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | TXB0104_HV_Side | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J10 |
| 1 | TXB0104_LV_Side | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | UART cluster | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7 |
The 38 most common of 41 parts.
Similar boards
- 2 layers104.8 × 54.8 mm

- 8 layers34 × 34 mm

OpenDrone AIO FC F405 HW
phonght32/OpenDrone_HW_AIO_FC_F405
OpenDrone Project - AIO Brushless FC F405.
211 parts53MIT - 4 layers65 × 30 mm

Elec gripette hub and dyn
pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette
122 parts11Apache-2.0 - 2 layers197.7 × 187.7 mm

Inverter IPM
jaeyeon302/2021BEV
Graduation Project making Battery Electric Vehicle. Dept. of Electrical and Computer Engineering at SNU.
144 parts4 - 4 layers100 × 50 mm

- 4 layers166.3 × 166.3 mm

- 2 layers

- 2 layers

Open secure esc 6s 10a brushed can485 iso
Stab-Rabbit-coding/Open-Secure-ESC
Governed by AGENTS.md. Build spec: ../README.md. Plan: Serenity-UAV docs/plans/2026-09-17-001-feat-tilt-controller-open-secure-esc-build-plan.md (U4).
82 parts1CERN-OHL-P-2.0
Questions
How big is the NykuPCB PCB?
It measures 76 × 76 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NykuPCB use?
41 parts, built around the TPS54560BDDA, TPS56339DDC and B560. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NykuPCB KiCad files?
From the Joaquinfu/NykuPCB-Project repository on GitHub, at the commit this page was made from: the board is nykuPCB.kicad_pcb and its schematic MicroMaestro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NykuPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Joaquinfu before reusing the design.