Skip to the content
2 layers104.8 × 54.8 mmCarteLed, the printed circuit board in 3D

Routage de la carte PCB en aliminum qui acceuille les LEDs

Size
104.8 × 54.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
127
Nets
60
Pads
358
Tracks, vias
337, 0
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
3 Jan 2023
Updated
10 Oct 2023

Overview

CarteLed is an open-source printed circuit board by Lazorme, from the Lazorme/CarteLEDs repository on GitHub. It is a 2-layer board of 104.8 × 54.8 mm with 127 parts on 60 nets, routed with 337 tracks and 0 vias.

It is built around the MPQ24833-BGN-AEC1-P, LERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQ and B360, with the B560 and NCP18XH103F03RB among its other parts. Its parts include 85 resistors, 14 capacitors, 11 diodes, 4 ICs and 4 inductors.

Main components

5

README

README.md

CarteLEDs

Routage de la carte PCB en aliminum qui acceuille les LEDs

PCB

Cumulative counting example

Parts

127
QtyValueFootprintReferences
32R_1206_3216MetricResistor_SMD:R_1206_3216MetricR0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1, R0_1 +16
220Resistor_SMD:R_1206_3216MetricR14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14, R14 +6
810kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR4, R7, R12, R15, R20, R23, R28, R31
7LERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQAComposantPROJOLEDs:LEDsLED1, LED2, LED3, LED4, LED5, LED6, LED7
6250mResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R17, R18, R25, R26
64.7µFCapacitor_SMD:CP_Elec_5x5.4C5, C10, C15, C20, C21, C22
5Conn_01x01Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatForkPMWBlue, PMWGreen, PMWRed, PMWWhite, Température
40.1µFCapacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolderC4, C9, C14, C19
410Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R13, R21, R29
411kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR8, R16, R24, R32
41kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R11, R19, R27
422µHInductor_SMD:L_12x12mm_H8mmL1, L2, L3, L4
4MPQ24833-BGN-AEC1-PPackage_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mmU1, U2, U3, U4
4NCCapacitor_SMD:C_0201_0603Metric_Pad0.64x0.40mm_HandSolderC3, C8, C13, C18
30Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6, R22, R30
3B360Diode_SMD:D_SMCD1, D3, D4
2400mResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR9, R10
1B560Diode_SMD:D_SMCD2
1Conn_01x02Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalDC_24V1
1NCP18XH103F03RBAComposantPROJOLEDs:THRMC1608X95NRT1

The 125 most common of 127 parts.

Similar boards

  • 2 layers76 × 76 mmNykuPCB, the printed circuit board in 3D

    NykuPCB

    Joaquinfu/NykuPCB-Project

    Kicad project for Nyku Robot to edit

    41 parts
  • 2 layers48.2 × 57 mmSunlu S1-Board, the printed circuit board in 3D

    Sunlu S1-Board

    Pegoku/Sunlu-S1-Board

    Drop-in replacement controller board for the Sunlu S1 filament dryer.

    58 parts15
  • 4 layersFluidNC board, the printed circuit board in 3D

    FluidNC board

    ephemeridis/FluidNC_board

    board for fluidnc

    404 parts6
  • 2 layers50 × 47.3 mmSR Aktor, the printed circuit board in 3D

    SR Aktor

    gerryvel/SR-Aktor

    Switch Relais Aktor N2k

    26 parts3GPL-3.0
  • 2 layers160 × 99.9 mmKiwiStim0.3, the printed circuit board in 3D

    KiwiStim0.3

    Neil427/KiwiSTIM

    KiwiSTIM is a engine simulator used for testing engine management computers, it is variation of Ardustim and uses the Ardustim firmware.

    144 parts3GPL-3.0
  • 4 layers138.4 × 138.3 mmGRBL board, the printed circuit board in 3D

    GRBL board

    ephemeridis/GRBL_board

    This is a PCB designed to run GRBL, an open source CNC control software that is designed and optimised for Arduino.

    287 parts2GPL-3.0
  • 4 layers52.8 × 56.4 mmESP32 Motor Controller, the printed circuit board in 3D

    ESP32 Motor Controller

    Angelpele/Integrated_FOC_BLDC_Actuator

    Design and development of a portable, self contained closed loop Field Oriented Controller (FOC) for Brushless DC (BLDC) motors built on the ESP32 S3 via a custom designed PCB.

    154 partsMIT
  • 2 layers68 × 86 mmCan datalogger board, the printed circuit board in 3D

    Can datalogger board

    bglen/vehicle_telemetry

    Vehicle Live Telemetry System using Pi-based data logging

    106 partsMIT

Questions

How big is the CarteLed PCB?

It measures 104.8 × 54.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CarteLed use?

127 parts, built around the MPQ24833-BGN-AEC1-P, LERTDUWS2WM-JBLA-1+LBMA-P+4V5A-P+MBNA-CQ, B360 and B560. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CarteLed KiCad files?

From the Lazorme/CarteLEDs repository on GitHub, at the commit this page was made from: the board is CarteAluLED/CarteLed/CarteLed.kicad_pcb and its schematic CarteAluLED/CarteLed/CarteLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CarteLed design in my own project?

Its repository states no licence, so its author keeps all rights: ask Lazorme before reusing the design.