2 layers100 × 100 mm
2 layers160 × 99.9 mm
KiwiStim0.3
Neil427/KiwiSTIM3KiwiSTIM is a engine simulator used for testing engine management computers, it is variation of Ardustim and uses the Ardustim firmware.
- Size
- 160 × 99.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 144
- Nets
- 172
- Pads
- 491
- Tracks, vias
- 1,060, 140
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 Jul 2023
- Updated
- 19 Apr 2024
Overview
KiwiStim0.3 is an open-source printed circuit board by Neil427, from the Neil427/KiwiSTIM repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 160 × 99.9 mm with 144 parts on 172 nets, routed with 1,060 tracks and 140 vias.
It is built around the 74HC14, VNLD5090TR-E and B360. Its parts include 49 resistors, 38 diodes, 14 capacitors, 9 connectors and 7 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
74HC14
SOP-14-40℃~+85℃ 1.9V、3.98V、4.4V、5.48V、5.9V 100mV、260mV、260mV 20uA 25ns@4.5V,50pF 2V~6V 6 74HC Noise suppression function Schmitt trigger SOP-14 Inverters ROHSJSMSEMIInverters
VNLD5090TR-E
SO-8-40℃~+150℃ 13A 2 4.5V~5.5V 90mΩ Active High Low Side Switch Overvoltage protection、Overcurrent Protection、Over temperature protection、Short-Circuit Protection SO-8 Power Distribution Switches ROHSSTMicroelectronicsPower Distribution Switches
B360
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 500uA@60V 60V 700mV@3A SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdKiwiSTIM
KiwiSTIM is a engine simulator used for testing engine management computers, it is variation of Ardustim and uses the Ardustim firmware. It has 2 Nanos for 2 switchable trigger setups, 2x crank/cam leds, 8x analog pots, 8x injector leds, 8x ignition leds, 8x digital output leds, stepper iac leds, 4x digital input switches.
Parts
144| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27 +19 |
| 32 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +16 |
| 10 | 10K | Potentiometer_THT:Potentiometer_TT_P0915N | RV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10 |
| 7 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C7, C8, C9, C11, C12, C14 |
| 6 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R6, R7, R10, R11 |
| 5 | 100N | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C10, C13 |
| 4 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R44, R45, R46, R47 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R48, R49 |
| 2 | 22uF 25V | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder | C2, C6 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | ArduinoNANO | Module:Arduino_Nano | A1, A2 |
| 1 | 0.2A ECU VREF | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F2 |
| 1 | 0.4 BOARD CONNECTOR | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | 0.4 POWER | Connector_Molex:Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J1 |
| 1 | 0.5A ECU POWER | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | 1A POWER | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F3 |
| 1 | 74HC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | A1 PWR | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP9 |
| 1 | A2 PWR | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP8 |
| 1 | ANALOG INPUTS | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J4 |
| 1 | ANALOG VREF | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP7 |
| 1 | AREF LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | B360 | Diode_SMD:D_SMC | D6 |
| 1 | BASIC | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J5 |
| 1 | CAM GND | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP6 |
| 1 | CAM LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | CAM LED POLARITY | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP3 |
| 1 | CAM PULLUP | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | CKP COUPLING | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | SW1 |
| 1 | CMP COUPLING | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | SW2 |
| 1 | CNK GND | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | CNK LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | CNK LED POLARITY | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP2 |
| 1 | CRANK PULLUP | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP4 |
| 1 | DI1 SWITCH | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | SW4 |
| 1 | DI2 SWITCH | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | SW5 |
| 1 | DI3 SWITCH | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | SW6 |
| 1 | DI4 SWITCH | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | SW7 |
| 1 | DIGITAL | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J9 |
| 1 | DPDT | Misc:AYZ0202AGRLC | SW3 |
| 1 | IGNITION | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J7 |
| 1 | INJECTORS | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J8 |
| 1 | LM2937-5 | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U2 |
| 1 | MISC. | Connector_Molex:Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical | J6 |
| 1 | POWER | Connector_Molex:Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical | J3 |
| 1 | PWR LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | VCC LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | VNLD5090 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3 |
Similar boards
- 2 layers267 × 300 mm
Output.Panel R0.5.1 300x300 2layer step1 Modified
rusefi/hw_microRusEfi
microRusEfi board for rusEfi ECU
2,371 parts98 - 4 layers103 × 82.4 mm
- 4 layers115.5 × 96.2 mm
Closed deck x4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
245 parts19 - 4 layers101 × 22 mm
- 4 layers160 × 117.5 mm
- 4 layers128 × 79 mm
- 4 layers162 × 115 mm
Fome mc
halbritt/fome-mc
FOME-MC integrated single-PCB motorcycle ECU (STM32H753 + 2x STM32F042 WBO)
514 parts1
Questions
How big is the KiwiStim0.3 PCB?
It measures 160 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiwiStim0.3 use?
144 parts, built around the 74HC14, VNLD5090TR-E and B360. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiwiStim0.3 KiCad files?
From the Neil427/KiwiSTIM repository on GitHub, at the commit this page was made from: the board is Kicad PCB/KiwiStim0.3.kicad_pcb and its schematic Kicad PCB/Digital.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiwiStim0.3 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).