
Boards using the BQ24073RGTR
31 boardsBoards in 28 GitHub repositories, designed in KiCad, that use the BQ24073RGTR by Texas Instruments (-40℃~+125℃ 1.5A 4.2V 4.35V~6.4V 50uA Charging IC Lithium Battery Not supported Support QFN-16-EP(3x3) Battery Management ROHS). See how each wires it, with its parts, size, README and files; the BQ24073RGTR’s symbol, footprint and pinout are on its own page.
- 6 layers90.1 × 135 mm

- 6 layers68.8 × 74.6 mm

FurbyBoard
Guilleloma/Furby-GPT
This project transforms a 1998 Furby into an interactive and advanced desktop assistant using a Raspberry Pi W. It incorporates OpenAI and Whisper for natural language processing, primarily relying on Google Cloud Text…
158 parts26 - 4 layers57.4 × 49.9 mm

- 4 layers66 × 36 mm

Gas sensor
JamesTwallin/gas_sensor
A tiny plug-in board for the rev E phone-companion board. It stands upright in a notch in rev E's sensor end, between the two gas sensor cans, and pokes 4.5 mm out through a slot in the case face, so its tip sits in the…
81 parts7MIT - 4 layers53.4 × 92.4 mm

Main revb
conol-ai/openwalkietalkie
OpenMicroDial firmware — Rust/embassy on SiFli SF32LB52 (LilyGo T-Display SF32 dev board)
142 parts3MIT - 2 layers112.5 × 41.5 mm

- 4 layers16 × 44 mm

Pilkbrain
cr1tbit/pilkbrain
The schematic is still a bit messy, just for the reference for now.
106 parts1 - 4 layers76 × 88 mm

- 4 layers95 × 90.6 mm

- 8 layers

Round pendant
sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing
342 parts1MIT - 4 layers

IgnisV2
TehoorMarjan/Ignis
An autonomous flame-shaped lamp/nightlight controlled by microcontroller with WS2812B LED ring and integrated Qi wireless charging. 🔥
86 parts1 - 2 layers76 × 22 mm

- 4 layers61.8 × 79.8 mm

Owl mainboard
danieltyukov/owltunes
Owl-shaped Spotify remote for your desk and pocket: ESP32-S3 firmware, LVGL UI, KiCad PCB, 3D-printed enclosure, and owl v0 on the Waveshare AMOLED kit
107 partsMIT - 2 layers90 × 65 mm

- 4 layers24 × 17.5 mm

Slimevr nugget
infopcgood/slimevr-nugget
SlimeVR nRF52840 PCB (QFN48 package version)
55 partsCERN-OHL-S-2.0 - 4 layers140 × 80 mm

Waypoint
M-Mrk/waypoint
Ever wanted to get somewhere from anywhere? Waypoint uses GNSS to guide you towards your destination by showing the direction, distance, and elevation difference.
187 parts - 2 layers100.8 × 85.5 mm

KidoleHierachialSchematic
maisahpirani2005-prog/KIDOLE-FINAL-
Production files, PCB schematic, Schematic
72 parts - 4 layers42 × 27 mm

- 2 layers61 × 31.5 mm

- 2 layers33 × 85 mm

GL868 ESP32V3.1
RamRamAndroid/GeoTinker-CodeMatrix
The GeoTinker GL868_ESP32 is a production-ready, open-source development board that combines an ESP32-S3 and SIM868 GSM modem, with GPS Tracking, motion detection, battery management, wireless connectivity…
79 partsGPL-3.0 - 6 layers62 × 44 mm

BioZ muscle monitor
ricknoboa137/BioZ-muscle-monitor
A portable, battery-powered bioimpedance spectroscopy (BIS) device that measures biceps muscle impedance during and after exercise, to track fatigue and fluid shift.
92 parts - 4 layers35 × 50 mm

- 2 layers128.7 × 60.3 mm

MOBILE
sumit123hub/Mobile-PCB-Files-
I always dreamed of building my own mobile system. This repo documents my journey designing a custom ESP32 PCB featuring a GSM module, display interface, and complete Battery Management System (BMS).
92 parts - 2 layers150 × 100 mm

Falcon rc
yedidiaSch/FalconDrone
[IN PROGRESS] High-performance flight controller for quadcopters, providing real-time stabilization and attitude control using FreeRTOS and C++ on STM32
78 partsMIT