
Falcon fc
yedidiaSch/FalconDrone
[IN PROGRESS] High-performance flight controller for quadcopters, providing real-time stabilization and attitude control using FreeRTOS and C++ on STM32

[IN PROGRESS] High-performance flight controller for quadcopters, providing real-time stabilization and attitude control using FreeRTOS and C++ on STM32
Falcon rc is an open-source printed circuit board by yedidiaSch, from the yedidiaSch/FalconDrone repository on GitHub, published under the MIT licence. It is a 2-layer board of 150 × 100 mm with 78 parts on 69 nets, routed with 890 tracks and 389 vias.
It is built around the ESP32-S3-WROOM-1-N8, NRF24L01P-R and AP2112K-3.3, with the BQ24073RGTR, DW01A and USBLC6-2SC6 among its other parts. Its parts include 25 resistors, 21 capacitors, 9 switches, 5 ICs and 4 connectors. It belongs with the robots and motor control boards and the ESP32 boards of this library.
FalconDrone is an ongoing development of a quadcopter flight control system built from scratch using the STM32F446RE (Nucleo) platform. The project focuses on implementing high-performance real-time estimation and control algorithms within a FreeRTOS environment.
The current milestone focuses on a "Studio-Tethered" stabilization mode, ensuring the drone maintains its attitude (Roll/Pitch) while secured to a test bench.
The firmware is designed with a modular, object-oriented approach in C++, emphasizing non-blocking operations and efficient resource management.
The system currently performs the following:
mkdir build
cd build
cmake ..
make| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C7, C9, C10, C11, C14, C17, C18, C19, C20, C21 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R7, R9, R21, R23, R25 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C5, C6, C8, C13 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R15 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R17, R18 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C15 |
| 2 | 220k | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R19, R20 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 1.2k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1.5k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 150k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 18650 | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | 22 | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C16 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 600R@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 7101 ARM | falcon_rc:Toggle_SPDT_P4.70mm | SW8 |
| 1 | 7103 MODE | falcon_rc:Toggle_SPDT_P4.70mm | SW9 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | BACK | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW7 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS810 | SW3 |
| 1 | BQ24073RGT | Package_DFN_QFN:VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U2 |
| 1 | CPT-9019S | Buzzer_Beeper:Buzzer_CUI_CPT-9019S-SMT | BZ1 |
| 1 | DEBUG_UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | DOWN | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW5 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | ESP32-S3-WROOM-1-N8 | RF_Module:ESP32-S3-WROOM-1 | U5 |
| 1 | FS8205A | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | Q1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | OK | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW6 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | POWER | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | STICK_LEFT | falcon_rc:Joystick_Alps_RKJXV122400x | JS1 |
| 1 | STICK_RIGHT | falcon_rc:Joystick_Alps_RKJXV122400x | JS2 |
| 1 | UP | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW4 |
| 1 | USB-C | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | green PWR | LED_THT:LED_D3.0mm | D1 |
| 1 | nRF24L01+ | RF_Module:nRF24L01_Breakout | J3 |
| 1 | red CHG | LED_THT:LED_D3.0mm | D2 |
| 1 | yellow | LED_THT:LED_D3.0mm | D4 |

yedidiaSch/FalconDrone
[IN PROGRESS] High-performance flight controller for quadcopters, providing real-time stabilization and attitude control using FreeRTOS and C++ on STM32

Monacrylic/Pinscope-benchmark-circuits
This repository contains a suite of sample KiCad circuits used as benchmarks for Pinscope.

jonny190/TableLight
A 3D-printable, battery-powered, USB-C rechargeable table lamp in the classic "Poldina" shape - honeycomb disc base, thin stem, down-firing cone shade with a white top - running WLED on an ESP32, with a capacitive touch…

KazimGL/ESP32-PowerIoT-DevBoard
ESP32 battery-powered IoT dev board with Li-ion charging, protection, and sensor support — designed in KiCad

katetriestocode/trailmap
this is the working version! (disclaimer: no antenna as it has not delivered yet, so manual gps coords insertion for now!)

HYLDAIC/Flagshep-V1_Audio-Player
A high fidelity semi-portable audio player student project with provided PCB files, 3D files and Code

milovanpms/talk-e
📻 — A simple LoRa-based talkie-walkie built on ESP32, operating on the 433 MHz frequency band for long-range, low-power wireless communication.

AhmedOsama21998/SmartWatch-ESP32-S3-PCB
ESP32-S3 smartwatch PCB with Li-ion battery charging, protection, and power management. Work in progress; sensor integration is planned.

houseofthe051010/ESP32-Walkie-Talkie-V2
This ESP32 Walkie Talkie is redesigned with a SX1262 radio, a PCB, and a full case redesign.
It measures 150 × 100 mm and has 2 copper layers, 1.6 mm thick.
78 parts, built around the ESP32-S3-WROOM-1-N8, NRF24L01P-R, AP2112K-3.3 and BQ24073RGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the yedidiaSch/FalconDrone repository on GitHub, at the commit this page was made from: the board is hardware/controller/falcon_rc.kicad_pcb and its schematic hardware/controller/falcon_rc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).