
Earring
sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing
Round pendant is an open-source printed circuit board by sequoia-hope, from the sequoia-hope/ultraroute repository on GitHub, published under the MIT licence. It is an 8-layer board with 342 parts on 210 nets, routed with 5,221 tracks and 879 vias.
It is built around the RP2350A, IS31FL3745-CLS4-TR and W25Q128JVPIQ, with the ALS-PT19-315C/L177/TR8, BQ24073RGTR and LIS2DW12TR-MS among its other parts. Its parts include 235 diodes, 50 capacitors, 29 resistors, 12 ICs and 2 transistors. It belongs with the RP2350 boards of this library.
A KiCad autorouter under the MIT license, a benchmark that judges it by KiCad's own checks, and Studio: a live, interactive view of the router at work. The project page is published at https://sequoia-hope.github.io/ultraroute/; there the studio plays back recorded runs.
The router is the core in core/: Rust crates that read a .kicad_pcb, route it and write it
back, keeping every byte they did not change. It runs as a command, ultraroute route, and the
same code compiled to WebAssembly routes in the studio's browser tab. On the PCBench sample it
benchmarks on (200 boards, 120 s each), 164 boards come out clean by KiCad's DRC (see
ROADMAP.md, "State at 2026-10-30").
Needs Rust (core/rust-toolchain.toml pins 1.95.0). From core/:
cargo build --release -p ultraroute -p kicad-text
target/release/ultraroute route fixtures/earring.kicad_pcb -o /tmp/routed.kicad_pcb --timeout 120With no stage named it runs the default recipe, the benchmark's. kicad-text (GPL, below) strokes
copper and mask text as KiCad does; without it text is a box round it, which can cover pads. The rules come from the
.kicad_pro and .kicad_dru beside the input; pours are left for KiCad to refill.
core/README.md lists the crates, the stages in their order, and every flag, and shows how to
judge the result with KiCad; ultraroute route --help prints the flags.
docs/library.md is for programs of your own built on the crates.
tools/pcbench.py routes boards of PCBench from bare
pads and judges each by KiCad 9 (zone refill, then DRC). docs/pcbench.md says how to prepare
the boards, run a sample, and compare two runs against the noise floor.
Needs Rust (with the wasm32-unknown-unknown target), wasm-pack and Node 22.
studio/build.sh
studio/target/release/studio-server --root . --port <port>build.sh builds the server, the core's ultraroute, and the core as WebAssembly for the tab.
Then open http://localhost:<port>/studio/: pick a board, route it with the default recipe or
stages of your choice, watch it route, drag or nudge parts, lock them, and see where the board
is congested. On this machine the port comes from the project registry, and ./serve.sh starts
the server.
A Boardroom project opens by its path: /?project=<absolute path>&board=<name>&variant=<v>
(board and variant may be left out when the project has one board). The studio routes
hw/<board>/<variant>/<board>.kicad_pcb with the .kicad_pro, .kicad_dru and routing.json
beside it; Save to project writes the routed board back over that file, unless it changed on
disk since it was loaded, and records the route and the router's report under
apps.studio.<board> in design/status.json.
| Path | What |
|---|---|
core/ | The router: crates, the ultraroute command, test fixtures |
studio/ | Server (runs the router, relays its live stream), Rust scene core compiled to WASM, Svelte client |
tools/pcbench.py, tools/lab.py | The benchmark, and lab runs recorded under ~/Software/ultraroute-lab |
docs/ | The library guide, the benchmark, the studio's design, research notes |
lab/ | Pages of recorded stage films and fan-out experiments |
ROADMAP.md | The plan, phase by phase |
Before the core, the router was copperroute (branch
governance, forked from emshotton/copperroute), a Rust port of freerouting, run as a separate
program from a checkout at copperroute/. It is kept as a reference router. The studio can still
run it on the jobs that have a Specctra .dsn when its binary is at target- topo/release/copperroute (or given with --router PATH); without it the studio routes on the core
alone. The tools of that era are kept under legacy/: the leaderboard runner,
the two-router KiCad bench, the morph viewer and the experiment history. They are not maintained and
not on the Pages site. copperroute is GPL-3.0-only (a derivative of freerouting, with parts of
KiCad's design-rule checker); ultraroute does not include or link its code and runs it only as a
separate process.
ultraroute is MIT-licensed; see LICENSE. The core is our own code, written from the
file formats, so its WebAssembly build in the studio is MIT too. Code from GPL routers must stay
out of core/ and studio/: linking it in, natively or as WebAssembly, would make the studio a
GPL work.
One crate is the exception, and it is a program, not a library: core/crates/kicad-text carries
KiCad's newstroke font and text layout, so it is GPL-3.0-or-later (its LICENSE).
The reader runs it as a separate process (kicad_pcb::text), sending the board's texts on its
standard input and reading their strokes back; no MIT crate depends on it, which
core/crates/kicad-pcb/tests/gpl_boundary.rs checks over the whole dependency graph.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 235 | RGB | round_pendant:LED_XL-1010RGB | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +219 |
| 26 | 100n | Capacitor_SMD:C_0402_1005Metric | C10, C11, C12, C13, C14, C20, C21, C22, C25, C27, C32, C33, C35, C42, C43, C52 +10 |
| 13 | 1u | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C31, C34, C41, C44, C51, C54, C61, C64, C71, C74 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R7, R9, R10, R11, R12, R31 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R16, R17, R18, R21, R22 |
| 5 | 30k | Resistor_SMD:R_0402_1005Metric | R30, R33, R50, R60, R70 |
| 5 | IS31FL3745 | round_pendant:WLCSP-36_2.9x2.9mm_P0.5mm | U1, U2, U10, U11, U12 |
| 3 | 22u | Capacitor_SMD:C_0603_1608Metric | C2, C30, C40 |
| 3 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C17, C19, C26 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C23, C24 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R19, R20 |
| 2 | 4.7u | round_pendant:C_0402_1005Metric_small_pads | C16, C18 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1V1 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | 3.3u | round_pendant:L_pol_2016 | L1 |
| 1 | 3.6k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 3k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | ALS-PT19 | round_pendant:SENSOR_ALS-PT19 | Q2 |
| 1 | BOOTSEL | round_pendant:SW_Panasonic_EVQP7C | SW2 |
| 1 | BQ24073 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U5 |
| 1 | CELL 403535 | round_pendant:BatteryPads | BT1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | LIS2DW12 | Package_LGA:LGA-12_2x2mm_P0.5mm | U9 |
| 1 | NTZD3155C | Package_TO_SOT_SMD:SOT-563 | Q1 |
| 1 | RP2350A | round_pendant:RP2350-QFN-60-1EP_7x7_P0.4mm_EP3.4x3.4mm_ThermalVias | U3 |
| 1 | RUN | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | SWCLK | TestPoint:TestPoint_Pad_D1.0mm | TP6 |
| 1 | SWDIO | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
| 1 | TPS7A0233 | Package_SON:Texas_X2SON-4_1x1mm_P0.65mm | U6 |
| 1 | USB wires | round_pendant:USB_Pads | J1 |
| 1 | USBLC6-2P6 | Package_TO_SOT_SMD:SOT-666 | U7 |
| 1 | USER / WAKE | round_pendant:SW_Panasonic_EVQP7C | SW1 |
| 1 | VBAT | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | VSYS | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | W25Q128JVPIQ | round_pendant:WSON-8_6x5mm_P1.27mm_NoEPCopper | U4 |
| 1 | XB9901A | round_pendant:XySemi_DFN-6_1.8x1.4mm | U8 |

sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing

sequoia-hope/ultraroute
PCB autorouting experiments around copperroute: route jobs, leaderboards, board morphing


ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.



AndreaGiulianini/lira
57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.



Corteil/rp2350-hdmi-hexpansion
RP2350 HDMI hexpansion for the EMF Tildagon badge -- mirrors the badge's display to a monitor over HSTX/DVI
342 parts, built around the RP2350A, IS31FL3745-CLS4-TR, W25Q128JVPIQ and ALS-PT19-315C/L177/TR8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the sequoia-hope/ultraroute repository on GitHub, at the commit this page was made from: the board is jobs/round-pendant-e-routed/input/round-pendant.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).