Skip to the content

Boards using the BAT60JFILM

48 boards

Boards in 44 GitHub repositories, designed in KiCad, that use the BAT60JFILM by STMicroelectronics (10V 3A 580mV@1A 6uA@10V Independent SOD-323 Schottky Diodes ROHS). See how each wires it, with its parts, size, README and files; the BAT60JFILM’s symbol, footprint and pinout are on its own page.

  • 2 layersNavigatorschema, the printed circuit board in 3D

    Navigatorschema

    maddevsio/mad-navigator

    Mad navigator is simple compass-like device shows direction to predefined geo point. This repository contains firmware source code and schematics for device.

    107 parts14
  • 6 layers29 × 33 mmMINIREX G4, the printed circuit board in 3D

    MINIREX G4

    mathieupommery/MINIREX_G473

    The following table demonstrates the estimated component costs based on Mouser volume pricing. The unit price of each component dynamically adapts to the total quantity required for the entire production batch (1, 100…

    109 parts10
  • 2 layers43.4 × 98 mmSolax Pylontech, the printed circuit board in 3D

    Solax Pylontech

    70p4z/tparse

    A minimalistic C library to parse text in microcontroller without memory allocation.

    51 parts6
  • 2 layers100 × 100 mmReflow, the printed circuit board in 3D

    Reflow

    windsorschmidt/reflow

    Hardware and firmware sources for a 2-channel reflow (toaster) oven controller. KiCad schematic & PCB.

    95 parts4MIT
  • 6 layers100 × 100 mmAi vision, the printed circuit board in 3D

    Ai vision

    embeddedci-com/pcb-trace-length-analyzer

    Two of them, and the difference between them is the point.

    370 parts3Apache-2.0
  • 4 layers100 × 67 mm2Phase SynchBuck, the printed circuit board in 3D

    2Phase SynchBuck

    Natchpai/LQRx-InterleavedBuck

    Digitally Controlled 2-phase Interleaved Buck Converter

    306 parts3CERN-OHL-S-2.0
  • 2 layers146.1 × 101.6 mmCc pcbRedo, the printed circuit board in 3D

    Cc pcbRedo

    lagunter145/CribCaptain

    96 parts2
  • 2 layers105.8 × 53.8 mmProgetto, the printed circuit board in 3D

    Progetto

    LucaBenzi/orologio-eink

    Orologio da tavolo e-ink con ESP32-C3, batteria LiFePO4 e sync NTP - 2 anni di autonomia con una ricarica USB-C

    63 parts2MIT
  • 2 layers49.9 × 28 mmCc2650 usb, the printed circuit board in 3D

    Cc2650 usb

    EnJens/ZigbeeBoard

    CC2650 Breakout Board

    147 parts1
  • 4 layers20.3 × 99.1 mmProton, the printed circuit board in 3D

    Proton

    ewyrick-mark-1/Chromatone

    Chromatone is an embedded audio visualizer running on the Raspberry Pi RP2350. It samples audio through the ADC, performs a real-time FFT, detects musical notes, and drives an RGB LED output based on the results.

    119 parts1
  • 4 layers40 × 40 mmSTMF405 Flight Controller, the printed circuit board in 3D

    STMF405 Flight Controller

    MatthiasGeorgImhof/STMF405_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN and flash memory instead of flash card.

    214 parts1
  • 4 layers40 × 40 mmSTMF765 Flight Controller, the printed circuit board in 3D

    STMF765 Flight Controller

    MatthiasGeorgImhof/STMF765_Flight_Controller

    A flight controller inspired by Speedybee F405 v3 but with CAN using F7 MCU. Use flash memory instead of flash card.

    235 parts1
  • 4 layers81.7 × 100.6 mmFinal Project PCB, the printed circuit board in 3D

    Final Project PCB

    ndesserich/ECE-36200-Final-Project-PCB

    A PCB that integrates an RP2350 and various peripherals to play games.

    80 parts1
  • 4 layers20.3 × 85.1 mmStm32f091, the printed circuit board in 3D

    Stm32f091

    Realvideogame/STM32-Battleship

    battleship

    46 parts1MIT
  • 4 layers127.8 × 56.1 mmController, the printed circuit board in 3D

    Controller

    sudo-junkie/Controller

    ESP32-based replacement PCB for UCOM USB game controller, with LCD, IMU, IR TX/RX and more...

    105 parts1
  • 6 layers150.1 × 110.1 mmMB1939, the printed circuit board in 3D

    MB1939

    svogl/stm32n6-board

    altium project import; kicad 10

    643 parts1
  • 4 layers62.3 × 94.3 mmSTM32N6 Thesis Board, the printed circuit board in 3D

    STM32N6 Thesis Board

    tobiasbaas/Roboterarm1

    Herzlich willkommen zum Repo des Robotersarmes der Arbeitsgruppe. Bitte beachtet, dass es sich hierbei handelt um eine Erweiterung bereits vorhandener Infrastruktur.

    221 parts1
  • 4 layers154 × 120 mmFSR CPU, the printed circuit board in 3D

    FSR CPU

    Alan-GIRAUDON/FSR_CPU

    FSR matrix with associated Control (CPU, Mux)

    207 parts
  • 4 layers40 × 50 mmUPTP Pre Rounding, the printed circuit board in 3D

    UPTP Pre Rounding

    BOJIT/uPTP

    The smallest, cheapest PTP clock that you can make!

    94 partsMIT
  • 2 layers66.1 × 97.5 mmSTM32F407xxx, the printed circuit board in 3D

    STM32F407xxx

    DNZioo/STM32F407VGT6_Design

    139 parts
  • 4 layers53.9 × 61.7 mmSTM32L476RG, the printed circuit board in 3D

    STM32L476RG

    GauravRDatta/ELEC5882M-project

    1) Gaussnewton5.m : This code performs an iterative non-linear Gauss-newton algebraic method for 3-D localisation of an initial guesstimate tag location near to its true original location within reasonable accuracy.

    60 parts
  • 2 layers63.5 × 50.8 mmStm32f091, the printed circuit board in 3D

    Stm32f091

    KatherineSandys/mini_project_ECE362

    49 parts