Skip to the content

Boards using the ULN2003ADRG

30 boards

Boards in 25 GitHub repositories, designed in KiCad, that use the ULN2003ADRG by QNH (SOP-16 Darlington Transistor Arrays ROHS). See how each wires it, with its parts, size, README and files; the ULN2003ADRG’s symbol, footprint and pinout are on its own page.

  • 2 layers30 × 60 mmSplitFlapDriverATtiny1616V4, the printed circuit board in 3D

    SplitFlapDriverATtiny1616V4

    adamgmakes/SplitFlapDisplay

    A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.

    25 parts190
  • 4 layers85 × 56 mmRadioberry LPF V1.3, the printed circuit board in 3D

    Radioberry LPF V1.3

    pa3gsb/Radioberry-2.x-extensions

    Hardware extensions to the Radioberry Ham Radio

    116 parts24
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT
  • 2 layers85 × 95 mmMicromouse, the printed circuit board in 3D

    Micromouse

    aiwachow/Micromouse-KICAD

    Micromouse robot design for academic puropose

    158 parts5
  • 4 layers47 × 59.7 mmTackle sensor hardware, the printed circuit board in 3D

    Tackle sensor hardware

    Celnardur/rfc_tackle_sensor

    Open a git bash terminal in the directory of your choosing and call the following command:

    79 parts3MIT
  • 4 layers100 × 100 mmPCB Design, the printed circuit board in 3D

    PCB Design

    ConquerToFreedom/SwasthEdge

    Low-cost self-diagnosing edge controller for industrial sensor reliability

    89 parts2
  • 2 layers99.8 × 49.8 mmLedArrayDemo, the printed circuit board in 3D

    LedArrayDemo

    radex/radmatrix

    Tiny modular LED matrix. NOTE: Moved to https://code.hackerspace.pl/radex/radmatrix

    453 parts2
  • 2 layers70 × 70 mmCorolla wheel car, the printed circuit board in 3D

    Corolla wheel car

    Cxmrykk/Toyota-Steering-Wheel

    Toyota (20-24) EV Steering Wheel Transceiver, Clockspring, Spline Adapter

    40 parts1
  • 4 layers123.6 × 90.8 mmPlayduino sheep tester, the printed circuit board in 3D

    Playduino sheep tester

    playduino/sheep-tester

    Raspberry Pi 4B HAT for Playduino Sheep EOL factory test

    201 parts1MIT
  • 2 layers310 × 100 mmAOML AB 3.0 reorganized v2, the printed circuit board in 3D

    AOML AB 3.0 reorganized v2

    cxs1529/XBT_Autolauncher_PCB

    KiCAD repository for the XBT Autolauncher board

    247 parts
  • 2 layers65 × 56 mmKiCadDemo, the printed circuit board in 3D

    KiCadDemo

    DonovanSquires/KiCadDemo

    LED Cube Shield for Raspberry Pi Club at Western Michigan University, March 2015

    28 parts
  • 2 layers65 × 30 mmVenti zero, the printed circuit board in 3D

    Venti zero

    ep-infosec/50_google_deluca-lung

    Navigate to the notebook demo/2021-07-18 controller demo.ipynb and run the cells.

    13 partsApache-2.0
  • 2 layers82.5 × 85.3 mmBSPD-27, the printed circuit board in 3D

    BSPD-27

    Full-Blue-Racing/BSPD-27

    BSPD for the fbr27 car

    108 parts
  • 4 layers74 × 66.8 mmEsp32s3-poc devboard, the printed circuit board in 3D

    Esp32s3-poc devboard

    Galacs/esp32s3-poc-devboard

    ESP32-S3 based PoC board made to test step-down power supply design, 24v level shifter, crystal circuits and RF circuit

    107 parts
  • 2 layers88.5 × 49.1 mmFalloutPCB, the printed circuit board in 3D

    FalloutPCB

    juhapark21/paddlecard

    A badge for Fallout that also acts as a CW paddle!

    10 parts
  • 4 layers100 × 100 mmEc30-tee, the printed circuit board in 3D

    Ec30-tee

    justinpirie/ec30

    Onan EC30 Tee Board with ESP32 Control

    167 partsApache-2.0
  • 4 layers80 × 60 mmKcell faker, the printed circuit board in 3D

    Kcell faker

    karlp/kcell-faker

    fake a load cell, for testing functional behaviour with changing loads.

    75 parts
  • 2 layers110 × 30 mmUSB 8769M, the printed circuit board in 3D

    USB 8769M

    mikef5410/USB_8769M

    USB Power and Control for Keysight 8769M 50GHz SP6T

    64 partsMIT
  • 2 layers131.1 × 149.9 mmHEDC B001, the printed circuit board in 3D

    HEDC B001

    Thaddeus-Maximus/dotclock

    An ESP32-based alarm clock with a dot matrix LED display, rotary encoder interface, MP3 audio playback, and a web configuration UI.

    70 parts
  • 2 layers30 × 60 mmBuoy pcb, the printed circuit board in 3D

    Buoy pcb

    wbarne12/buoy_pcb

    Contains the KiCad files for the pcb.

    30 parts
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    159 parts19
  • 2 layers98.8 × 69.8 mmPre Ignition, the printed circuit board in 3D

    Pre Ignition

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    167 parts19
  • 4 layers98.8 × 69.8 mmSparkGapX4, the printed circuit board in 3D

    SparkGapX4

    OpenLogicEFI/Hardware

    Hardware is based off an open source project called Speeduino by Josh Stewart.

    166 parts19
  • 2 layers160 × 100 mmRelay, the printed circuit board in 3D

    Relay

    florolf/lab-automation

    Plugs into relay and can be used to provide switchable 5V USB power to downstream devices.

    61 parts1