Skip to the content
2 layers65 × 56 mmKiCadDemo, the printed circuit board in 3D

LED Cube Shield for Raspberry Pi Club at Western Michigan University, March 2015

Size
65 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
65
Pads
146
Tracks, vias
305, 38
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
16 Mar 2015
Updated
21 Mar 2015

Overview

KiCadDemo is an open-source printed circuit board by DonovanSquires, from the DonovanSquires/KiCadDemo repository on GitHub. It is a 2-layer board of 65 × 56 mm with 28 parts on 65 nets, routed with 305 tracks and 38 vias.

It is built around the SN74LVC1G139DCTR, ULN2003ADRG and TSW-103-07-T-S. Its parts include 7 capacitors, 7 connectors, 6 ICs and 3 resistors.

Main components

3

Parts

28
QtyValueFootprintReferences
6TSW-103-07-T-Stsw-103-07-t-s:tsw-103-07-t-sJ2, J3, J4, J5, J6, J7
50.1uCapacitors_SMD:C_0805C1, C2, C5, C6, C7
4Mounting_Holemounting_hole:mounting_hole_2.75mm_pthM1, M2, M3, M4
4SN74LVC1G139DCTRsn74lvc1g139dctr:sn74lvc1g139dctrU1, U2, U3, U6
3330Resistors_SMD:R_0805R1, R2, R3
2ULN2003ADRuln2003adr:ULN2003ADRU4, U5
1100uCapacitors_SMD:C_1210C4
110uCapacitors_SMD:C_0805C3
119921992:1992J1
1VAL**raspberrypi2_shieldraspberrypi2_shield

Similar boards

  • 2 layers30 × 60 mmSplitFlapDriverATtiny1616V4, the printed circuit board in 3D

    SplitFlapDriverATtiny1616V4

    adamgmakes/SplitFlapDisplay

    A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.

    25 parts190
  • 4 layers85 × 56 mmRadioberry LPF V1.3, the printed circuit board in 3D

    Radioberry LPF V1.3

    pa3gsb/Radioberry-2.x-extensions

    Hardware extensions to the Radioberry Ham Radio

    116 parts24
  • 4 layers189.4 × 59.1 mmFlippyDriver, the printed circuit board in 3D

    FlippyDriver

    NietoSkunk/FlippyDriver

    Driver board for Luminator MAX3000 Flip Dot Panels

    344 parts10MIT
  • 2 layers85 × 95 mmMicromouse, the printed circuit board in 3D

    Micromouse

    aiwachow/Micromouse-KICAD

    Micromouse robot design for academic puropose

    158 parts5
  • 4 layers47 × 59.7 mmTackle sensor hardware, the printed circuit board in 3D

    Tackle sensor hardware

    Celnardur/rfc_tackle_sensor

    Open a git bash terminal in the directory of your choosing and call the following command:

    79 parts3MIT
  • 4 layers100 × 100 mmPCB Design, the printed circuit board in 3D

    PCB Design

    ConquerToFreedom/SwasthEdge

    Low-cost self-diagnosing edge controller for industrial sensor reliability

    89 parts2
  • 2 layers99.8 × 49.8 mmLedArrayDemo, the printed circuit board in 3D

    LedArrayDemo

    radex/radmatrix

    Tiny modular LED matrix. NOTE: Moved to https://code.hackerspace.pl/radex/radmatrix

    453 parts2

Questions

How big is the KiCadDemo PCB?

It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KiCadDemo use?

28 parts, built around the SN74LVC1G139DCTR, ULN2003ADRG and TSW-103-07-T-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KiCadDemo KiCad files?

From the DonovanSquires/KiCadDemo repository on GitHub, at the commit this page was made from: the board is ProjectFolder/KiCadDemo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the KiCadDemo design in my own project?

Its repository states no licence, so its author keeps all rights: ask DonovanSquires before reusing the design.