

Ec30-tee
Onan EC30 Tee Board with ESP32 Control
- Size
- 100 × 100 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 167
- Nets
- 120
- Pads
- 506
- Tracks, vias
- 1,979, 377
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Sep 2026
- Updated
- 15 Sep 2026
Overview
Ec30-tee is an open-source printed circuit board by justinpirie, from the justinpirie/ec30 repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 100 × 100 mm with 167 parts on 120 nets, routed with 1,979 tracks and 377 vias.
It is built around the ESP32-S3-WROOM-1U-N8R2, LTC4412ES6#TRMPBF and SN74LVC1G17DCKR, with the TPS3808G33DBVR-TP, LM4040B25FTA and LTC6993IS6-2#TRMPBF among its other parts. Its parts include 63 resistors, 35 capacitors, 13 ICs, 11 transistors and 8 connectors. It belongs with the ESP32 boards of this library.
Main components
12ESP32-S3-WROOM-1U-N8R2
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLTC4412ES6#TRMPBF
TSOT-23-6L-40℃~+85℃ 1 110us 11uA 13us 2.5V~28V 500mV 50uA 50uA 635mV MOSFET TSOT-23-6L ORing Controllers ROHSAnalog DevicesGate DriversSN74LVC1G17DCKR
SOT-353-40℃~+125℃ 1 1 1.2V、1.9V、2.3V、2.4V 1.65V~5.5V 100mV、300mV、400mV、550mV 10uA 32mA 32mA 74LVC 8.3ns@5V,50pF SOT-353 Logic Gates ROHSTECH PUBLICLogic GatesTPS3808G33DBVR-TP
SOT-23-6L-40℃~+125℃ 1 1.7V~6.5V 2.8uA 3.07V Active Low Manual reset input Open Drain Voltage monitor SOT-23-6L Supervisor and Reset ICs ROHSTECH PUBLICUncategorisedLM4040B25FTA
SOT-23-40℃~+125℃ 100ppm/℃ 15mA 2.5V 35uVrms 60uA Fixed Parallel ±0.2% SOT-23 Voltage Reference ROHSDiodes IncorporatedVoltage ReferenceLTC6993IS6-2#TRMPBF
TSOT-23-6L-40℃~+85℃ 1 11ns 16mA 16mA 2.25V~5.5V 200uA Adjustable pulse width、Retriggerable function Monostable TSOT-23-6L Monostable Multivibrators ROHSAnalog DevicesMonostable MultivibratorsULN2003ADRG
SOP-16SOP-16 Darlington Transistor Arrays ROHSQNHDarlington Transistor ArraysUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)SN74LVC1G08DBVR
SOT-23-5-40℃~+85℃ 1 1.65V~5.5V 1.7V、2V 100nA 2 3.4ns@5V,15pF 32mA 32mA 350mV 4V 700mV、800mV 74LVC AND Gate Local shutdown mode SOT-23-5 Logic Gates ROHSTWGMCLogic Gates0805W8F1003T5E (SMT业务专用)
0805100kΩ ±1% 0805 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface MountCC0805KRX7R9BB104
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTBSS138LT1G
SOT-23-55℃~+150℃ 1 N-channel 200mA 225mW 5.6Ω@2.75V 500mV 50V 50pF 5pF SOT-23 MOSFETs ROHSonsemiMOSFETs
README
README.mdEC-30 tee board
An ESP32-S3 interface board for an EC-30 generator controller and Onan QD8000, with a Victron 12 V run-request input, learned START/STOP control, and status-light logging.
Current revision: E3
- KiCad project · schematic · routed PCB
- ESPHome firmware
- Complete E3 prototype package
- BOM, assembly instructions and manufacturing files
- Changes, verification and open items
- Onan QD8000 status interpretation
E3 adds an onboard DS18B20 PCB-temperature sensor and a maintained relay-enable slide switch. The board is 100 × 100 mm with four copper layers. It retains the bus routes, clearance constraints, 0.30 mm minimum drill, and the E1/E2 via/ground-return corrections. Screw terminals are retained.
The recorded E3 DRC, ERC and schematic-parity checks have zero findings under the existing enabled rules; exported manufacturing geometry and firmware build/tests pass. This is a prototype: supplier acceptance, physical validation and the documented firmware audit findings remain open. Status flashes are logged but are not yet automatically decoded. The temperature sensor measures the PCB, not generator coolant.
Working with the files
Open the E3 .kicad_pro file above in KiCad 10.0.6 or a compatible version. Its local symbol and footprint libraries accompany it. Do not use the root-level CAD files or older revision directories for the current build.
The firmware was validated with ESPHome 2026.8.2. Supply a local secrets.yaml containing api_key, ota_password, wifi_ssid, wifi_password, and ap_password; credentials are intentionally excluded from Git. The C++ tests are in the firmware tests directory. Manufacturing and verification scripts are retained under routed/rev-e3-development/tools; they currently contain macOS-specific tool paths and assume commands are run from the repository root.
Design history
Earlier source, routing tools and validation reports are retained in their original directory structure to preserve traceability and script references. They are historical and may contain superseded instructions. The original root documentation is archived here. E3 links above are authoritative for this import.
Build caches, local UI state, secrets, downloaded reference documents/models and redundant older ZIP bundles were excluded. Original local files remain untouched. The destination repository's existing license is preserved.
Parts
167| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100k | Resistor_SMD:R_0805_2012Metric | R4, R45, R65, R66, R69, R70, RB2, RB3, RB5, RB6, RB10, RB11, RB12, RT10, RT11, RT12 +4 |
| 15 | 100n | Capacitor_SMD:C_0805_2012Metric | C4, C11, C13, C17, C19, C20, CT2, CT3, CT5, CT6, CT8, CT9, CT10, CT11, CT12 |
| 11 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R6, R41, R43, R58, R59, R60, R61, R62, R63, R64 |
| 11 | 4.7k 1206 | Resistor_SMD:R_1206_3216Metric | R40, R42, RS2, RS3, RS5, RS6, RS8, RS9, RS10, RS11, RS12 |
| 7 | 100n/50V | Capacitor_SMD:C_0805_2012Metric | C3, C21, C22, C23, C24, C26, C27 |
| 7 | BSS138LT1G | Package_TO_SOT_SMD:SOT-23 | Q4, Q5, Q6, Q7, Q8, Q9, Q10 |
| 7 | SMAJ18A | Diode_SMD:D_SMA | DT2, DT3, DT5, DT6, DT10, DT11, DT12 |
| 5 | 10u/50V | Capacitor_SMD:C_1206_3216Metric | C1, C2, C8, C10, C18 |
| 4 | 100k 0.1% | Resistor_SMD:R_0805_2012Metric | R71, R72, RT8, RT9 |
| 4 | 22u/25V | Capacitor_SMD:C_1206_3216Metric | C5, C6, C9, C25 |
| 4 | 4.7k | Resistor_SMD:R_0805_2012Metric | R46, R48, R49, R50 |
| 4 | MountingHole_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0805_2012Metric | C12, C14, C15 |
| 3 | LTV-814S-TA1 | Package_DIP:SMDIP-4_W9.53mm | OK1, OK2, OK3 |
| 2 | 10k 0.1% | Resistor_SMD:R_0805_2012Metric | RB8, RB9 |
| 2 | 1984675 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J2, J4 |
| 2 | 270R | Resistor_SMD:R_0805_2012Metric | R51, R52 |
| 2 | 2k2 | Resistor_SMD:R_1206_3216Metric | R55, R56 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R7, R8 |
| 2 | AQY212GS | ec30-tee:SOP-4_Optocoupler | K1, K2 |
| 2 | DMP3098L | Package_TO_SOT_SMD:SOT-23 | Q3, Q11 |
| 2 | SMAJ33A | Diode_SMD:D_SMA | DT8, DT9 |
| 2 | SMBJ18CA | Diode_SMD:D_SMB | D2, D5 |
| 2 | SN74LVC1G17DCKR | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U5, U13 |
| 1 | +12V | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | +5V | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | 1-794068-0 | Connector_TE-Connectivity:TE_MATE-N-LOK_1-794068-x_2x08_P4.14mm_Vertical | J1 |
| 1 | 100k 1% | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 100p | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 13.7k 1% | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 1A slow 1206 | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 1k bleed | Resistor_SMD:R_0805_2012Metric | R68 |
| 1 | 3.07V supervisor | Package_TO_SOT_SMD:SOT-23-6 | U12 |
| 1 | 3.3V buck | Package_TO_SOT_SMD:TSOT-23-6 | U3 |
| 1 | 4.7uH | ec30-tee:L_Bourns_SRP4020TA | L2 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R57 |
| 1 | 52.3k 1% | Resistor_SMD:R_0805_2012Metric | R67 |
| 1 | 680k 1% 100ppm | Resistor_SMD:R_0805_2012Metric | R44 |
| 1 | ADC power-off isolation | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U10 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BZT52C12-7-F | Diode_SMD:D_SOD-123 | D1 |
| 1 | Buck ideal diode | Package_TO_SOT_SMD:TSOT-23-6 | U9 |
| 1 | DMP6350S-7 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | DS18B20 1-Wire | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | ESP32-S3-WROOM-1U-N8R2 | ec30-tee:ESP32-S3-WROOM-1U_Drill030 | U1 |
| 1 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP6 |
| 1 | KRAIL | TestPoint:TestPoint_Pad_D1.5mm | TP5 |
| 1 | Key switch | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | LM4040B25FTA | Package_TO_SOT_SMD:SOT-23 | U6 |
| 1 | LMR51430XDDCR | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | LTC6993-2 retriggerable | Package_TO_SOT_SMD:TSOT-23-6 | U8 |
| 1 | Qwiic / STEMMA QT | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | RESET | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | SRP7050TA-220M | ec30-tee:L_Bourns_SRP7050TA | L1 |
| 1 | SS14 | Diode_SMD:D_SMA | D3 |
| 1 | UART_RX | TestPoint:TestPoint_Pad_D1.5mm | TP8 |
| 1 | UART_TX | TestPoint:TestPoint_Pad_D1.5mm | TP7 |
| 1 | ULN2003ADR | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | USB-C receptacle | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | VPUMP | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | Victron 12V input | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9 |
| 1 | WD AND RESET_OK | Package_TO_SOT_SMD:SOT-23-5 | U11 |
More from justinpirie/ec30
2- 4 layers100 × 100 mm

- 4 layers100 × 100 mm

Similar boards
- 4 layers68 × 68 mm

Tile
Bruhdows/klink
Klink is a magnetic tile system for building programmable machines. First up: a marble run with sensors, buttons, lights, gates, splitters and an elevator.
122 parts - 4 layers86 × 145 mm

- 4 layers82 × 55 mm

Spark
ratmuds/spark
The PCB files for this project. The gerber and other PCBA files are in the production folder.
202 parts1 - 4 layers100 × 120 mm

Micromouse pcb
MukeshSethy/micromouse-runner
This is my repo for the first version of full size micromouse development.
184 parts - 4 layers60 × 50 mm

ESP32 boardV1
robertxdx/ESP32S3PD15W
A 15 W USB-C powered ESP32-S3 LED-strip controller and development board.
46 parts - 2 layers140 × 105 mm

- 2 layers100 × 64 mm

Rf power monitor rev2
TheKingOfChaos/RF-Power-Monitor
A 2-layer carrier board for the WIZnet W5500-EVB-Pico-PoE. It is 80 x 51.5 mm: exactly as long as the module, so both short edges line up with the module.
129 parts - 2 layers159 × 99 mm

Controller f407
wa1hco/rotator_controller
Clean slate rebuild of full featured rotator controller.
122 partsGPL-3.0
Questions
How big is the Ec30-tee PCB?
It measures 100 × 100 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ec30-tee use?
167 parts, built around the ESP32-S3-WROOM-1U-N8R2, LTC4412ES6#TRMPBF, SN74LVC1G17DCKR and TPS3808G33DBVR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ec30-tee KiCad files?
From the justinpirie/ec30 repository on GitHub, at the commit this page was made from: the board is routed/rev-e2-development/source/ec30-tee.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ec30-tee design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).