

Buoy pcb
Contains the KiCad files for the pcb.
- Size
- 30 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 44
- Pads
- 127
- Tracks, vias
- 126, 23
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Aug 2025
- Updated
- 5 Aug 2025
Overview
Buoy pcb is an open-source printed circuit board by wbarne12, from the wbarne12/buoy_pcb repository on GitHub. It is a 2-layer board of 30 × 60 mm with 30 parts on 44 nets, routed with 126 tracks and 23 vias.
It is built around the BQ25185DLHR, ULN2003ADRG and USB4175-GF-0230-C, with the BS170 and SS14 among its other parts. Its parts include 10 resistors, 7 capacitors, 7 connectors, 3 ICs and 1 diode.
Main components
5BQ25185DLHR
WSON-10-EP(2.2x2)-40℃~+125℃ 1 1A 2.2V 3V~18V 4.4V 4uA Charging IC Lithium Battery、LiFePO4 Battery Support WSON-10-EP(2.2x2) Battery Management ROHSTexas InstrumentsBattery ManagementULN2003ADRG
SOP-16SOP-16 Darlington Transistor Arrays ROHSQNHDarlington Transistor ArraysUSB4175-GF-0230-C
SMDSMD New Arrivals ROHSGlobal Connector Technology (GCT)UncategorisedBS170
TO-92-55℃~+150℃ 1 N-channel 1.2Ω@10V 17pF 2.1V 24pF 500mA 60V 7pF 830mW N-Channel TO-92 MOSFETs ROHSonsemiMOSFETsSS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 22u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4, C5, C6 |
| 4 | 22k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R9, R10, R11 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7 |
| 2 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C7 |
| 2 | Conn_01x07 | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J6, J7 |
| 2 | USB4175-GF-0230-C | footprints:USB4175GF0230C | J2, J5 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 13k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 1uH | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L1 |
| 1 | 300 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 732k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | BQ25185DLHR | footprints:SON40P220X200X80-11N | IC1 |
| 1 | BS170 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | Conn_01x05 | Connector_JST:JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical | J1 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | SS14 | Diode_SMD:D_1206_3216Metric | D1 |
| 1 | TPS61023DRLT | footprints:SOTFL50P160X60-6N | IC2 |
| 1 | ULN2003ADR | footprints:SOIC127P600X175-16N | IC3 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers98.8 × 69.8 mm

SparkGapX4
OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.
166 parts19 - 2 layers45.5 × 46 mm

Chipsat v1
noellayang/chipsat-v1
Custom ESP32-C3 power-management testbed for small satellite firmware experiments
69 parts - 4 layers

- 2 layers114 × 89 mm

- 2 layers30 × 60 mm

SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 4 layers85 × 56 mm

Radioberry LPF V1.3
pa3gsb/Radioberry-2.x-extensions
Hardware extensions to the Radioberry Ham Radio
116 parts24 - 4 layers189.4 × 59.1 mm

Questions
How big is the Buoy pcb PCB?
It measures 30 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Buoy pcb use?
30 parts, built around the BQ25185DLHR, ULN2003ADRG, USB4175-GF-0230-C and BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Buoy pcb KiCad files?
From the wbarne12/buoy_pcb repository on GitHub, at the commit this page was made from: the board is Buoy PCB.kicad_pcb and its schematic Buoy PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Buoy pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask wbarne12 before reusing the design.