Skip to the content

Boards using the PMEG2010ER

29 boards

Boards in 24 GitHub repositories, designed in KiCad, that use the PMEG2010ER by Nexperia (1 Independent 1A 1mA@20V 20V 340mV@1A 50A SOD-123W Schottky Diodes ROHS). See how each wires it, with its parts, size, README and files; the PMEG2010ER’s symbol, footprint and pinout are on its own page.

  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    331 parts87
  • 4 layers26.4 × 41.7 mmDspod cv1800b, the printed circuit board in 3D

    Dspod cv1800b

    emeb/dspod

    A family of boards for Eurorack DSP audio

    96 parts10MIT
  • 4 layers50.1 × 85.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-R

    The LIONv3-R is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    89 parts4
  • 2 layers190.8 × 61.7 mmWahoo30, the printed circuit board in 3D

    Wahoo30

    rqcoon/wahoo30

    30% Keyboard based on the CH552T microcontroller using FAK firmware

    79 parts4GPL-3.0
  • 2 layers160 × 100 mmMTS module, the printed circuit board in 3D

    MTS module

    TU-Darmstadt-APQ/MTS_module

    Module for AOM-based modulation transfer spectroscopy (MTS) signal generation.

    131 parts3
  • 4 layers93 × 26.7 mmTram tangnano, the printed circuit board in 3D

    Tram tangnano

    dg1vs/Transputer-TRAM-TangNano

    A TRAM-size FPGA Transputer module based on the Sipeed Tang Nano 20K.

    41 parts2
  • 4 layers50.2 × 40.2 mmLIONv3, the printed circuit board in 3D

    LIONv3

    RodrigoCAndrade/LIONv3-Mini

    The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

    88 parts2
  • 2 layers160 × 100 mmPDH module, the printed circuit board in 3D

    PDH module

    TU-Darmstadt-APQ/PDH-module

    Produces a PDH error-signal using MiniCircuits SYPD-1+ phase detector and LT1568 4th order low-pass filter. To be used with a AD9959 DDS board.

    85 parts2
  • 4 layers257 × 117.5 mmTeacup carrier, the printed circuit board in 3D

    Teacup carrier

    thingino/teacup-neo

    Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.

    157 parts1GPL-3.0
  • 2 layers51.8 × 52.8 mmWifi pc power switch, the printed circuit board in 3D

    Wifi pc power switch

    gemarcano/wifi_pc_power_switch

    Wireless enabled power switch for desktop PCs.

    22 parts
  • 2 layers170 × 135 mmPanel, the printed circuit board in 3D

    Panel

    ostertag/UACS

    University Access Controll System

    618 partsGPL-3.0
  • 4 layers50 × 56 mmRadar synth, the printed circuit board in 3D

    Radar synth

    sigma0us/radar-synth

    Dual PLL radar transmitter, design for prototyping

    87 parts
  • 2 layers21 × 75.2 mmPoEPico, the printed circuit board in 3D

    PoEPico

    TerryGeng/PoePico

    Ethernet extension for Raspberry Pi Pico powered by W5500, with Power-Over-Ethernet support.

    62 parts
  • 4 layers50.2 × 40 mmMotor control board, the printed circuit board in 3D

    Motor control board

    waterloo-rocketry/controls-2025-electrical

    2025 Controls Electrical

    87 parts
  • 4 layers115.9 × 51.1 mmXbx nrf, the printed circuit board in 3D

    Xbx nrf

    zuidec/xbx-nrf

    A replacement bottom board for the Xbox Series X|S controller (model 1914) built on a Nordic nRF52840, with a 2.4 GHz USB dongle instead of Xbox Wireless / Bluetooth

    91 parts
  • 4 layers50 × 43.5 mmCAN relay, the printed circuit board in 3D

    CAN relay

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    56 parts15GPL-3.0
  • 4 layers45.2 × 32.5 mmLogger, the printed circuit board in 3D

    Logger

    waterloo-rocketry/canhw

    Hardware monorepo avionics PCB

    62 parts15GPL-3.0
  • 2 layers54.6 × 31.1 mmESP32-Writer CH340G, the printed circuit board in 3D

    ESP32-Writer CH340G

    74th/esp32-dev-boards

    ESP32 Dev Boards PCB

    32 parts8MIT
  • 4 layers140 × 100 mmMain rev b completed, the printed circuit board in 3D

    Main rev b completed

    iamdarshg/drone-arm

    Reworked cheaper, maybe faster but less redundant drone controller.

    165 parts2
  • 4 layers80 × 45.5 mmLink teensy fpga, the printed circuit board in 3D

    Link teensy fpga

    dg1vs/Transputer-Teensy-Link

    A family of practical, Ethernet-connected link interfaces for classic INMOS transputer systems, based on the Teensy 4.1.

    23 parts
  • 2 layers61 × 66 mmIaracershield, the printed circuit board in 3D

    Iaracershield

    fredowski/ialf

    Linefollower board based on Raspberry Pi Pico with Seeed Grove Connectors and DRV8835 motor driver.

    33 parts