2 layers21 × 51.5 mm
ADC Ext 12Ch
TerryGeng/PoePico
Ethernet extension for Raspberry Pi Pico powered by W5500, with Power-Over-Ethernet support.
31 parts
2 layers21 × 75.2 mm
PoEPico
TerryGeng/PoePicoEthernet extension for Raspberry Pi Pico powered by W5500, with Power-Over-Ethernet support.
- Size
- 21 × 75.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 94
- Pads
- 260
- Tracks, vias
- 509, 75
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 16 Oct 2022
- Updated
- 14 Aug 2023
Overview
PoEPico is an open-source printed circuit board by TerryGeng, from the TerryGeng/PoePico repository on GitHub. It is a 2-layer board of 21 × 75.2 mm with 62 parts on 94 nets, routed with 509 tracks and 75 vias.
It is built around the ARJM11C7-114-BA-EW2, LMR36006FSC3RNXTQ1 and PD70200ILD-TR, with the W5500, MDB10S and 1PS76SB70 among its other parts. Its parts include 29 capacitors, 20 resistors, 4 ICs, 4 diodes and 2 inductors. It belongs with the RP2040 boards of this library.
Main components
7ARJM11C7-114-BA-EW2
插件-40℃~+85℃ 100Mbps Power over Ethernet module (PoE) Plugin Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAbraconEthernet Connectors / Modular Connectors (RJ45 RJ11)
LMR36006FSC3RNXTQ1
VQFN-12(2x3)-40℃~+125℃@(TA) 1 2.1MHz 26uA 3.3V 4.2V~60V 600mA Buck Buck Built-in Fixed Yes VQFN-12(2x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
PD70200ILD-TR
DFN-12(3x4)-40℃~+85℃ 1 1.8A 47.7W IEEE 802.3 at(PoE+)、IEEE 802.3 af(PoE) PGOOD status indication、PD detection and disconnect identification、Thermal Protection、Overcurrent Protection、Dual event classification detection Powered Device (PD) DFN-12(3x4) Power Over Ethernet (PoE) Controllers ROHSMicrochip TechnologyPower Over Ethernet (PoE) Controllers
W5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet Controllers
MDB10S
SMD-4P-55℃~+150℃ 1.1V@1A 10uA@1kV 1A 1kV 30A Single-Phase Rectifier SMD-4P Bridge Rectifiers ROHSonsemiBridge Rectifiers
1PS76SB70
SOD-3231 Independent 100mA 10uA@70V 410mV@1mA 70V 70mA SOD-323 Schottky Diodes ROHSNexperiaSchottky Diodes
PMEG2010ER
SOD-123W1 Independent 1A 1mA@20V 20V 340mV@1A 50A SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C9, C10, C11, C13, C15, C16, C20, C25 |
| 4 | 33 | Resistor_SMD:R_0402_1005Metric | R10, R11, R14, R15 |
| 4 | 49.9 | Resistor_SMD:R_0402_1005Metric | R1, R5, R9, R12 |
| 3 | 18pF | Capacitor_SMD:C_0402_1005Metric | C23, C24, C29 |
| 2 | 0.22uF | Capacitor_SMD:C_0805_2012Metric | C19, C21 |
| 2 | 100K | Resistor_SMD:R_0402_1005Metric | R17, R19 |
| 2 | 10nF | Capacitor_SMD:C_0402_1005Metric | C14, C28 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C8, C18 |
| 2 | 1nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C26, C27 |
| 2 | 330 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 6.8nF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | MDB10S | Package_SO:TSSOP-4_4.4x5mm_P4mm | D1, D2 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 12.4k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 1PS76SB70 | Diode_SMD:D_SOD-323 | D3 |
| 1 | 1nF/2kV | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 24.9k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 243K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 4.7uF | Capacitor_SMD:C_1206_3216Metric | C17 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 50K | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 51K | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 6.8uH | Inductor_SMD:L_1210_3225Metric | L2 |
| 1 | ARJM11C7-114-BA-EW2 | PoEPicoFootprint:ABRACON_ARJM11C7-502-AB-ER2-T | J1 |
| 1 | BLM18KG102SH1D | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | LMR36006FSC3RNXTQ1 | PoEPicoFootprint:LMR36006FSC3RNXRQ1 | U3 |
| 1 | LOGO | PoEPicoFootprint:JQI-Logo | G*** |
| 1 | PD70200ILD-TR | Package_DFN_QFN:DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm | U1 |
| 1 | PMEG2010ER | Diode_SMD:Nexperia_CFP3_SOD-123W | D4 |
| 1 | Pico | PoEPicoFootprint:RPi_Pico_Connector | U4 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U2 |
More from TerryGeng/PoePico
1Similar boards
- 4 layers73.4 × 76.2 mm
Kommunikationsmodul Ethernet
KhanKudo/diplomprojekt
HTL tgm Diplomprojekt RTLS (IOO), Gruppe Foldlabs, Jahrgang 2023/24
126 parts - 4 layers88.9 × 79.4 mm
Link
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
170 parts3 - 4 layers1 × 55.8 mm
BlockBuilder
AnotherMike-exe/KiCadBlocks
Reusable KiCad 10 PCB layout blocks: module reference boards, design block fragments and host setup docs
82 partsMIT - 2 layers70.3 × 33 mm
W5500-POE Ethernet SPI breackout
immortal-sniper1/W5500-POE-Ethernet-SPI-breackout-PCB
W5500 based ethernet tranceiver with SPI interface
87 partsMIT - 6 layers60 × 55 mm
PoE Ethernet GPIB Adapter
Kofen/PoE_Ethernet_GPIB_Adapter
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
198 parts120GPL-3.0 - 2 layers99.1 × 85.1 mm
Main Brd
bluebandit21/magic-wifi
A method to connect two devices using Pseudo-Ethernet over long distance LoRa and WiFi
64 parts5GPL-3.0 - 2 layers66.3 × 40 mm
Hexpansion
DanNixon/ethernet-hexpansion
W5500 based Ethernet and PoE hexpansion for the Tildagon badge.
23 parts4CERN-OHL-P-2.0 - 2 layers118 × 56 mm
Pi pico dual ethernet
DanNixon/pi-pico-dual-ethernet
Pi Pico x 2 W5500 driven Ethernet interfaces (one of which is PoE)
27 partsMIT
Questions
How big is the PoEPico PCB?
It measures 21 × 75.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PoEPico use?
62 parts, built around the ARJM11C7-114-BA-EW2, LMR36006FSC3RNXTQ1, PD70200ILD-TR and W5500. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PoEPico KiCad files?
From the TerryGeng/PoePico repository on GitHub, at the commit this page was made from: the board is board/PoEPico.kicad_pcb and its schematic board/PoEPico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PoEPico design in my own project?
Its repository states no licence, so its author keeps all rights: ask TerryGeng before reusing the design.