

PoE Ethernet GPIB Adapter
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
- Size
- 60 × 55 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 198
- Nets
- 168
- Pads
- 621
- Tracks, vias
- 1,271, 741
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20241129)
- Created
- 29 Nov 2024
- Updated
- 22 Oct 2026
Overview
PoE Ethernet GPIB Adapter is an open-source printed circuit board by Kofen, from the Kofen/PoE_Ethernet_GPIB_Adapter repository on GitHub, published under the GPL-3.0 licence. It is a 6-layer board of 60 × 55 mm with 198 parts on 168 nets, routed with 1,271 tracks and 741 vias.
It is built around the ATMEGA4809-AF, SN74LV1T125DCK and ARJM11C7-114-BA-EW2, with the CH340X, 24AA256UID-I/P and 1N4448WS among its other parts. Its parts include 64 capacitors, 56 resistors, 12 diodes, 8 ICs and 2 transistors. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATMEGA4809-AF
TQFP-48(7x7)-40℃~+125℃ 1.8V~5.5V 10bit 20MHz 256Byte 41 48KB 6KB 8 Bit AVR Built-in FLASH TQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)SN74LV1T125DCK
SC-70-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Tri-State Unidirectional SC-70-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversARJM11C7-114-BA-EW2
插件-40℃~+85℃ 100Mbps Power over Ethernet module (PoE) Plugin Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSAbraconEthernet Connectors / Modular Connectors (RJ45 RJ11)CH340X
MSOP-10-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial、USB to Parallel MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters24AA256UID-I/P
PDIP-8-40℃~+85℃ 1.7V~5.5V 256Kbit 400kHz 5ms I2C PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM1N4448WS
SOD-323-65℃~+150℃@(Tj) 1.25V@150mA 2.5uA@75V 200mW 250mA 4A 4ns 75V Independent SOD-323 Switching Diodes ROHSDiodes IncorporatedSwitching DiodesDT1240A-08LP3810
UDFN3810-9-55℃~+85℃@(Ta) 0.6pF 10V 3.3V 5.5A@8/20us 500nA 55W 5V 8 ESD IEC 61000-4-2、IEC 61000-4-5 UDFN3810-9 ESD and Surge Protection (TVS/ESD) ROHSDiodes IncorporatedESD And Surge Protection (TVS/ESD)MYS80
SOIC-4-50℃~+150℃ 1.2V@500mA 160V 22A 500mA 5uA@160V Single-Phase Rectifier SOIC-4 Bridge Rectifiers ROHSDIOTECBridge Rectifiers112-024-113R001
插件插件 New Arrivals ROHSNorCompUncategorised50475AC
-Common Mode FiltersMurataBC857BS
SOT-363-55℃~+150℃ 15nA 2 PNP 200MHz 200mA 220 300mV 300mW 45V 5V PNP SOT-363 Bipolar (BJT) ROHSYangzhou Yangjie Electronic TechnologyBipolar (BJT)CUHS20S40,H3F
SMDSchottky DiodesToshiba
README
HW/README.mdPoE Ethernet GPIB Adapter - Hardware Files
Overview
This folder contains the necessary hardware files for the PoE Ethernet GPIB Adapter project.
- Schematics: The schematic files can be found here.
- Output Files: The output files, including Gerber files and assembly information, are located here.
- Releases: Precompiled hardware files for different versions are available under Releases.
Important note: PCB thickness should be 1.6mm, 1 oz / 35 um copper thickness on all layers!
Ensure to verify compatibility with your PCB manufacturing service before using the files.
Parts
198| Qty | Value | Footprint | References |
|---|---|---|---|
| 22 | 100n | Capacitor_SMD:C_0402_1005Metric | C11, C12, C13, C14, C19, C20, C22, C23, C31, C32, C33, C34, C35, C36, C37, C38 +6 |
| 16 | 10µ | Capacitor_SMD:C_0402_1005Metric | C7, C8, C9, C10, C15, C16, C21, C24, C25, C26, C27, C28, C29, C30, C63, C64 |
| 15 | 49.9 | Resistor_SMD:R_0402_1005Metric | R23, R24, R25, R26, R27, R36, R37, R38, R39, R41, R42, R53, R54, R55, R56 |
| 9 | 4.7n 1kV | Capacitor_SMD:C_0805_2012Metric | C47, C48, C49, C50, C51, C52, C53, C54, C57 |
| 8 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID2, FID3, FID4, FID5, FID6, FID7, FID8 |
| 7 | 10 | Resistor_SMD:R_0402_1005Metric | R10, R11, R32, R33, R34, R35, R40 |
| 6 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP6, TP9, TP11, TP14, TP19, TP21 |
| 5 | 4.7k | Resistor_SMD:R_0402_1005Metric | R5, R7, R12, R17, R31 |
| 4 | 1.5k | Resistor_SMD:R_0603_1608Metric | R46, R47, R48, R49 |
| 4 | 10µ 100v | Capacitor_SMD:C_1210_3225Metric | C43, C44, C45, C46 |
| 4 | 18p | Capacitor_SMD:C_0402_1005Metric | C2, C3, C17, C18 |
| 3 | 220 | Resistor_SMD:R_0402_1005Metric | R18, R29, R30 |
| 3 | 27k | Resistor_SMD:R_0402_1005Metric | R3, R15, R16 |
| 2 | +5v | TestPoint:TestPoint_Pad_D1.0mm | TP10, TP28 |
| 2 | 10 | Resistor_SMD:R_Array_Convex_8x0602 | RN1, RN2 |
| 2 | 100µ | Capacitor_SMD:C_1206_3216Metric | C59, C60 |
| 2 | 12.1k | Resistor_SMD:R_0402_1005Metric | R6, R28 |
| 2 | 1N4448WS | Diode_SMD:D_SOD-323 | D4, D10 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R20, R21 |
| 2 | 47n | Capacitor_SMD:C_0402_1005Metric | C1, C62 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R13, R14 |
| 2 | DT1240A-08LP3810 | Package_DFN_QFN:UDFN-9_1.0x3.8mm_P0.5mm | D1, D2 |
| 2 | MYS80 | Diode_SMD:Diode_Bridge_Diotec_MicroDil_3.0x3.0x1.8mm | D6, D7 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 2 | SN74LV1T125DCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U7, U8 |
| 2 | nGND | TestPoint:TestPoint_Pad_D1.0mm | TP26, TP27 |
| 1 | 0 | Resistor_SMD:R_0603_1608Metric | R52 |
| 1 | 0.75A | Fuse:Fuse_1812_4532Metric | F1 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R50 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 100n 100v | Capacitor_SMD:C_0603_1608Metric | C42 |
| 1 | 100µ 6.3v | Capacitor_SMD:CP_Elec_5x5.3 | C61 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 112-024-113R001 | Centronic:112-024-113R001 | J2 |
| 1 | 150k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 15k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 180k | Resistor_SMD:R_0402_1005Metric | R44 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 1k | Inductor_SMD:L_0805_2012Metric | FB2 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 2.2µ | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L2 |
| 1 | 220R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 22pF | Capacitor_SMD:C_0603_1608Metric | C55 |
| 1 | 24.9k | Resistor_SMD:R_0402_1005Metric | R43 |
| 1 | 24AA256UID | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | 25Mhz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R51 |
| 1 | 330k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 330pF | Capacitor_SMD:C_0603_1608Metric | C56 |
| 1 | 4.42k | Resistor_SMD:R_0402_1005Metric | R45 |
| 1 | 470pF 1kV | Capacitor_SMD:C_0805_2012Metric | C58 |
| 1 | 5.6v | Diode_SMD:D_SOD-123F | D12 |
| 1 | 50475AC | Magnetics:muRata_5000A | L1 |
| 1 | APX811-31UG-7 | Package_TO_SOT_SMD:SOT-143 | U9 |
| 1 | ARJM11C7-114-BA-EW2 | RJ45:RJ45_ARJM11C7-114-BA-EW2 | J1 |
| 1 | ATmega4809-A | Package_QFP:TQFP-48_7x7mm_P0.5mm | U2 |
| 1 | AZ1117-3.3_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U10 |
| 1 | BC857BS | Package_TO_SOT_SMD:SOT-363_SC-70-6 | Q2 |
| 1 | CH340X | Package_SO:MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | CUHS20S40 | Diode_SMD:D_TUMD2 | D11 |
| 1 | DFLZ20-7 20V | Diode_SMD:D_PowerDI-123 | D9 |
| 1 | LED_ABGR | LED_SMD:LED_RGB_Everlight_EASV3015RGBA0_Horizontal | D5 |
| 1 | LM5180 | Package_SON:WSON-8-1EP_4x4mm_P0.8mm_EP1.98x3mm | U1 |
| 1 | MCU_RX | TestPoint:TestPoint_Pad_D1.0mm | TP13 |
| 1 | MCU_TX | TestPoint:TestPoint_Pad_D1.0mm | TP12 |
| 1 | MISO | TestPoint:TestPoint_Pad_D1.0mm | TP16 |
| 1 | MOIS_3 | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP15 |
| 1 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.8mm | NT3 |
| 1 | P4SMAJ5.0A | Diode_SMD:D_SMA | D3 |
| 1 | P4SMAJ58CA | Diode_SMD:D_SMA | D8 |
| 1 | PB1 | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | PB2 | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | PB3 | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | PB4 | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | PMV30XPEAR | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Reset | Button_Switch_THT:SW_Tactile_SKHH_Angled | SW1 |
| 1 | SCK | TestPoint:TestPoint_Pad_D1.0mm | TP17 |
| 1 | SCL | TestPoint:TestPoint_Pad_D1.0mm | TP8 |
| 1 | SDA | TestPoint:TestPoint_Pad_D1.0mm | TP7 |
The 186 most common of 198 parts.
Similar boards
- 4 layers101.6 × 53.3 mm

- 4 layers209 × 97.3 mm

Keypad
JGilcreast/MetalHead
An opensource firmware and software drop-in replacement for the 85V Automatic Stirrup Bender by CRS Specialties Inc. ...short story behind the name...
206 parts - 4 layers68.6 × 21 mm

- 6 layers86.3 × 91.9 mm

Eps re project
spacelab-ufsc/eps-re-hardware
Hardware project of the EPS-RE module
372 parts2CERN-OHL-S-2.0 - 2 layers50 × 45.5 mm

- 2 layers39 × 58.5 mm

Atari SIO2SD Mini
RichardRozehnal/Atari-SIO2SD-Mini
Atari SIO2SD disk drive emulator for 8bit Atari.
41 parts2GPL-3.0 - 4 layers115 × 76.3 mm

- 6 layers65 × 55.8 mm

AES42HAT
s13n/AES42HAT
A digital audio interface in the shape of a Raspberry Pi Hat for AES42 microphones and more.
232 parts1
Questions
How big is the PoE Ethernet GPIB Adapter PCB?
It measures 60 × 55 mm and has 6 copper layers, 1.6 mm thick.
What parts does the PoE Ethernet GPIB Adapter use?
198 parts, built around the ATMEGA4809-AF, SN74LV1T125DCK, ARJM11C7-114-BA-EW2 and CH340X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PoE Ethernet GPIB Adapter KiCad files?
From the Kofen/PoE_Ethernet_GPIB_Adapter repository on GitHub, at the commit this page was made from: the board is HW/PoE_Ethernet_GPIB_Adapter.kicad_pcb and its schematic HW/Ethernet_interface.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PoE Ethernet GPIB Adapter design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).