Skip to the content

Boards using the TLV75733PDBVR-MS

46 boards

Boards in 43 GitHub repositories, designed in KiCad, that use the TLV75733PDBVR-MS by MSKSEMI (SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS). See how each wires it, with its parts, size, README and files; the TLV75733PDBVR-MS’s symbol, footprint and pinout are on its own page.

  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0
  • 4 layers180.4 × 157.2 mmMx track, the printed circuit board in 3D

    Mx track

    freznel10/Zerf9

    Draft repo or Chunky v13 aka Zert9 MX_track

    300 parts20GPL-3.0
  • 4 layers68 × 43 mmEcp5-dev board, the printed circuit board in 3D

    Ecp5-dev board

    medhyal/ecp5-dev-board

    ECP5 FPGA DEV BOARD

    114 parts10
  • 2 layers30.5 × 22.9 mmTeensy4 esp32 breakout, the printed circuit board in 3D

    Teensy4 esp32 breakout

    blackketter/teensy4_esp32_breakout

    Breakout board for Teensy 4 with ESP32 module

    16 parts7
  • 4 layers17.5 × 51.3 mmMMU 3V3, the printed circuit board in 3D

    MMU 3V3

    frozen-signal/Apple_IIe_MMU_3V3

    Open source design files for the Apple IIe's MMU custom IC

    45 parts7CC-BY-4.0
  • 4 layers90.3 × 94.6 mmThermalV3, the printed circuit board in 3D

    ThermalV3

    moro696/thermal_camera

    A diy thermal camera based on a Flir Lepton 3.5 sensor

    126 parts7
  • 2 layers70.6 × 66.3 mmPrototype Rev-, the printed circuit board in 3D

    Prototype Rev-

    DiegoBriceno03/Portable-Biofeedback

    Portable Biofeedback device for anxiety management

    106 parts3
  • 4 layers51.4 × 31.4 mmRP2350, the printed circuit board in 3D

    RP2350

    engelberd/sensor-system

    Working notes for the first custom RP2350A board with ADXL355, USB-C development power/data, 12 V field input, RS485, and a power architecture biased toward a clean accelerometer supply.

    87 parts2
  • 4 layers40 × 17.6 mmNk LoRa, the printed circuit board in 3D

    Nk LoRa

    Nitrokey/nitrokey-lora-hardware

    93 parts2
  • 4 layers48 × 48 mmBetsyBoardBig, the printed circuit board in 3D

    BetsyBoardBig

    engstad/BetsyBoard

    An STM32L4 prototyping board

    79 parts1
  • 4 layers39.4 × 83.8 mmSTM32F405 DevBoard, the printed circuit board in 3D

    STM32F405 DevBoard

    jonghee-son/STM32F405_DevBoard

    STM32 development board equipped with STM32F405RGT6

    46 parts1Apache-2.0
  • 2 layers51.5 × 92 mmEcoport bridge v1, the printed circuit board in 3D

    Ecoport bridge v1

    jrowe88/ecoport-bridge

    CTA-2045 (EcoPort) bridge for a Rinnai REHP65 heat pump water heater

    74 parts1AGPL-3.0
  • 4 layers35.1 × 21.8 mmESP32-C3, the printed circuit board in 3D

    ESP32-C3

    maheshkulalb/ESP32-C3FH4-

    This repository contains the complete open-source hardware design for a custom development board based on the Espressif **ESP32-C3FH4** SoC (RISC-V 32-bit single-core, integrated 4MB Flash).

    43 parts1Apache-2.0
  • 4 layers40 × 40 mmAeroHawk FC, the printed circuit board in 3D

    AeroHawk FC

    sbbxiii/The-Eagle

    The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB

    76 parts1MIT
  • 4 layers127.8 × 56.1 mmController, the printed circuit board in 3D

    Controller

    sudo-junkie/Controller

    ESP32-based replacement PCB for UCOM USB game controller, with LCD, IMU, IR TX/RX and more...

    105 parts1
  • 2 layers20.8 × 34.8 mmCarrier, the printed circuit board in 3D

    Carrier

    5haman/especcy

    Thumb-sized ESP32 ZX Spectrum handheld, 24 × 38 × 12 mm: FreeCAD enclosure, KiCad carrier study and cycle-timed 48K emulator firmware.

    21 partsGPL-3.0
  • 2 layers117.1 × 77.2 mmMagic dial, the printed circuit board in 3D

    Magic dial

    10-Percent-Complete/magic-dial

    63 parts
  • 4 layers34 × 86 mmMinisumo 2025, the printed circuit board in 3D

    Minisumo 2025

    alexivan04/Minisumo-PCB

    109 parts
  • 2 layersSih, the printed circuit board in 3D

    Sih

    arthithadee/Sonar_transmitter

    AZHAI is a software-defined sonar transmitter firmware designed for autonomous underwater vehicles (AUVs).

    73 parts
  • 4 layers65 × 45 mmLora gps tracker rev a, the printed circuit board in 3D

    Lora gps tracker rev a

    bogdan-kovalchuk/esp32-lora-gps-tracker

    Encrypted point-to-point GPS telemetry over 433 MHz LoRa between two ESP32 boards.

    69 partsMIT
  • 2 layers63 × 50 mmThermometer, the printed circuit board in 3D

    Thermometer

    CornetPrisme/PCB-Thermometer

    Custom environmental sensor node based on the ESP32-C6 (Wi-Fi 6, BLE 5, Zigbee/Thread). It features three distinct temperature and humidity sensors on a shared I2C bus, is powered via USB-C (3.3V LDO), and includes two…

    40 parts
  • 2 layers214 × 174 mmSoundBoxSTM32, the printed circuit board in 3D

    SoundBoxSTM32

    DominikNeugebauer/PCB

    All of my pcb projects i have made so far

    145 parts
  • 6 layers51 × 53.5 mmCustom fc rat, the printed circuit board in 3D

    Custom fc rat

    Ekta-Gupta27/custom-flight-controller-pcb

    Custom flight controller PCB designed in KiCad with STM32F7, multiple sensors, CAN, USB, telemetry, PWM and IO interfaces.

    122 parts
  • 4 layers20.4 × 28.5 mmSTM32F042-Mini, the printed circuit board in 3D

    STM32F042-Mini

    engstad/STM32F042-Mini

    A Small Breakout for the STM32F042, suitable for small keyboards.

    22 parts