
5boost
DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

Portable Biofeedback device for anxiety management
Prototype Rev- is an open-source printed circuit board by DiegoBriceno03, from the DiegoBriceno03/Portable-Biofeedback repository on GitHub. It is a 2-layer board of 70.6 × 66.3 mm with 106 parts on 104 nets, routed with 680 tracks and 82 vias.
It is built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32 and LM324, with the MAX30101EFD+, MAX5419LETA+ and TLV75718PDBVR-MS among its other parts. Its parts include 44 resistors, 33 capacitors, 9 ICs, 7 diodes and 4 transistors. It belongs with the ESP32 boards of this library.
A repository that stores hardware and software files developed for the Portable Biofeedback Device, as worked on and built by students in the Electrical & Computer Engineering (ECE) Department of the College of Engineering & Computer Science (CECS) at the University of Central Florida (UCF) in Orlando, Florida.
The accompanying Android app was developed in Android Studio 3.5.3, making use of Android SDK/API 21 (Android 5).
All the schematics and layout is done in Kicad 5.14 along with custom libraries. These libraries are added under /Libraries.
These projects use custom path for its libraries. The custom Kicad Path variable ${KI_SDREPO} is used to increase portability. Custom variable points to the physical location of the /Libraries directory and must be declared under "Preferences > Configure Paths" setting before use.
Roles are listed under each group member
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R7, R16, R24, R25, R26, R27, R28, R41, R42 |
| 11 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C5, C20, C24, C25, C26, C27, C30, C31, C32, C33 |
| 10 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R17, R18, R30, R31, R33, R34, R39, R40, R43, R44 |
| 8 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C6, C16, C17, C18, C21, C22, C23 |
| 7 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C7, C10, C11, C12, C13 |
| 5 | 200k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14, R15, R19, R20, R37 |
| 4 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8, C9, C28, C29 |
| 3 | 1.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R22, R23 |
| 3 | 530R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R10, R11, R35 |
| 3 | DESD5V0S1BB-7 | Diode_SMD:D_SOD-523 | D1, D2, D3 |
| 3 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D5, D6 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R9 |
| 2 | 2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R29 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R13 |
| 2 | SS8050-G | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1.78k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R32 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R21 |
| 1 | 1uH | IHLP2020BZER1R0M0:IHLP2020BZER1R0M01 | L1 |
| 1 | 22.1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C14 |
| 1 | 2N7002ET7G | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | 320R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R36 |
| 1 | 47.5k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R38 |
| 1 | AGND - GND | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | BOOT | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | BQ24072TRGTR | BQ24072TRGTR:BQ24072TRGTR | U7 |
| 1 | BSS83P | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | CP2102N-A01-GQFN28 | Package_DFN_QFN:QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | Charger / Battery Bypass | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | EN | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U5 |
| 1 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D7 |
| 1 | Interface Hub | 1053141114:1053141110 | J2 |
| 1 | LM324 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 1 | MAX30101EFD+ | MAX30101:MAX30101EFD+ | U1 |
| 1 | MAX5419LETA+ | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm | U3 |
| 1 | TLV75718PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | TLV75733PDBVR | Package_TO_SOT_SMD:SOT-23-5 | U9 |
| 1 | TMR OFF | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TPS61232DRCR | TPS61232DRCR:TPS61232DRCR | U6 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |

DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

Stab-Rabbit-coding/Serenity-UAV
A functional, security conscious, Unmanned Aerial Vehicle based on the Firefly Class spacecraft Serenity from the 2002 show..


iliasbartolini/privacy-seed-heartrate-sensor-board
Custom heart rate board based on MAX30101


willemcvu/gCAN-gauge
An open-source ESP32-based programmable digital gauge targeted at EV conversions

sea2-dsi-fceia/PLACA_IOT_INDUSTRIAL
Placa de desarrollo para aplicaciones industriales IoT basada en ESP32 (Open Source)

rdalla/proj_kicad_esp32_energy_consumption
The project is a energy monitoring module. It is based on ESP32 with current sensor (sct-013 50A/1V).

It measures 70.6 × 66.3 mm and has 2 copper layers, 1.6 mm thick.
106 parts, built around the CP2102N-A01-GQFN28R, ESP32-WROOM-32, LM324 and MAX30101EFD+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DiegoBriceno03/Portable-Biofeedback repository on GitHub, at the commit this page was made from: the board is Protype_Rev-/Prototype_Rev-/test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DiegoBriceno03 before reusing the design.