Skip to the content
123

BSS83P

TECH PUBLICExtended

Part id
tech-public/BSS83P
Category
MOSFETs
Package
SOT-23
Pins
3
In stock
31,082 at JLCPCB (C7472872)
Used on
29 open-source boards

Overview

The BSS83P is a MOSFET made by TECH PUBLIC in a SOT-23 package with 3 pins.

PCBKit's library has its KiCad symbol (Transistor_FET:BSS83P, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23, from KiCad's library), ready for a KiCad board. 31,082 are in stock at JLCPCB (part C7472872). 29 open-source boards in 25 repositories on GitHub use it.

Symbol

123
Transistor_FET:BSS83PFrom KiCad's library

Footprint

123
Package_TO_SOT_SMD:SOT-23From KiCad's library

Pinout

3
The pins of the BSS83P
PinNameType
1GInput
2SPassive
3DPassive

Open-source boards using it

29See all 29
  • 2 layers68.6 × 53.3 mmKiCad Shield, the printed circuit board in 3D

    KiCad Shield

    thainnos/LICSTER

    A Low-cost ICS Security Testbed for Education and Research

    76 parts122
  • 2 layers75 × 35 mmCANPower, the printed circuit board in 3D

    CANPower

    RaphWeyman/CANPower

    Accessory power controller for BMW CAN bus bikes

    66 parts10GPL-2.0
  • 2 layers99.9 × 51.4 mmGR AVR Programmer, the printed circuit board in 3D

    GR AVR Programmer

    GadgetReboot/AVR_Programmer

    Atmel AVR programmer based on Arduino Pro Micro, intended for development into ISP and HVSP using various AVR programming interfaces and protocols.

    52 parts7
  • 2 layers95 × 45 mmHdmi2c, the printed circuit board in 3D

    Hdmi2c

    wlcx/hdmi2c

    A HTTP -> DDC (I2C) bridge

    61 parts6
  • 2 layers136.2 × 85.9 mmBATDATUNIT01, the printed circuit board in 3D

    BATDATUNIT01

    mlab-modules/BATDATUNIT01

    Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.

    225 parts5GPL-3.0
  • 2 layers296.8 × 145 mmKaSe, the printed circuit board in 3D

    KaSe

    mornepousse/KaSe_PCB

    This repository contains the KiCad project and resources for the KaSe keyboard, a compact, column-staggered layout inspired by the Atreus62.

    159 parts4
  • 2 layers70.6 × 66.3 mmPrototype Rev-, the printed circuit board in 3D

    Prototype Rev-

    DiegoBriceno03/Portable-Biofeedback

    Portable Biofeedback device for anxiety management

    106 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BSS83P?

Yes. The symbol is Transistor_FET:BSS83P and the footprint Package_TO_SOT_SMD:SOT-23, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BSS83P?

SOT-23, with 3 pins. Its footprint is drawn on this page.

Where is the BSS83P datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the BSS83P?

JLCPCB lists it as part C7472872, with 31,082 in stock; the sellers' links on this page open their listings.

What can replace the BSS83P?

Parts like it in the library: the SI2308A by UMW, the SI2310 by GOODWORK, the AS2324 by AnBon and the LP2309LT1G by Leshan Radio (LRC). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BSS83P?

29 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.