Skip to the content
2 layers296.8 × 145 mmKaSe, the printed circuit board in 3D

This repository contains the KiCad project and resources for the KaSe keyboard, a compact, column-staggered layout inspired by the Atreus62.

Size
296.8 × 145 mm
Copper layers
2
Thickness
1.6 mm
Parts
159
Nets
113
Pads
947
Tracks, vias
1,854, 2,933
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Dec 2024
Updated
10 Feb 2026

Overview

KaSe is an open-source printed circuit board by mornepousse, from the mornepousse/KaSe_PCB repository on GitHub. It is a 2-layer board of 296.8 × 145 mm with 159 parts on 113 nets, routed with 1,854 tracks and 2,933 vias.

It is built around the ESP32-S3-DEVKITC-1-N8, AP130-33SAG and TLV73333PDBV, with the BSS83P among its other parts. Its parts include 64 diodes, 64 switches, 5 connectors, 4 capacitors and 4 ICs. It belongs with the keyboards and input boards and the ESP32 boards of this library.

Main components

4

README

Old/Mae_Keyboard_Dev_Kit/README.md

Mae_Keyboard

Parts

159
QtyValueFootprintReferences
64DIODEMaeLid:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48
64SWITCH_PUSHkey:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +48
7Heatsink_PadTestPoint:TestPoint_Loop_D3.80mm_Drill2.8mmHS1, HS2, HS3, HS5, HS6, HS7, HS8
34k7Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3
3TestPointTestPoint:TestPoint_Pad_2.5x2.5mmTP3V1, TP5V1, TPGND1
21uCapacitor_SMD:C_0805_2012MetricC3, C4
2BSS83PPCM_Package_TO_SOT_SMD_AKL:SOT-23Q1, Q2
2C_0805PCM_Capacitor_SMD_AKL:C_0805_2012MetricC1, C2
2Conn_01x03Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ4, J5
2TestPointTestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mmTP3V2, TP3V3
1AP130-33SAPCM_Package_TO_SOT_SMD_AKL:SOT-23U2
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1Conn_01x06ext:TP4056-18650J2
1ESP32-S3-DevKitCPCM_Espressif:ESP32-S3-DevKitCU3
1NRF24L01_BreakoutRF_Module:nRF24L01_BreakoutU1
1TLV73333PDBVPackage_TO_SOT_SMD:SOT-23-5U4
1gc9a01_DISPLAYConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1
1kicadSymbol:KiCad-Logo2_5mm_SilkScreenHS9

More from mornepousse/KaSe_PCB

2
  • 2 layers296.8 × 145 mmAtreus62, the printed circuit board in 3D

    Atreus62

    mornepousse/KaSe_PCB

    This repository contains the KiCad project and resources for the KaSe keyboard, a compact, column-staggered layout inspired by the Atreus62.

    152 parts4
  • 2 layers296.8 × 144.9 mmAtreus62, the printed circuit board in 3D

    Atreus62

    mornepousse/KaSe_PCB

    This repository contains the KiCad project and resources for the KaSe keyboard, a compact, column-staggered layout inspired by the Atreus62.

    145 parts4

Similar boards

  • 2 layers68.6 × 53.3 mmKiCad Shield, the printed circuit board in 3D

    KiCad Shield

    thainnos/LICSTER

    A Low-cost ICS Security Testbed for Education and Research

    76 parts122
  • 2 layers75 × 35 mmCANPower, the printed circuit board in 3D

    CANPower

    RaphWeyman/CANPower

    Accessory power controller for BMW CAN bus bikes

    66 parts10GPL-2.0
  • 2 layers99.9 × 51.4 mmGR AVR Programmer, the printed circuit board in 3D

    GR AVR Programmer

    GadgetReboot/AVR_Programmer

    Atmel AVR programmer based on Arduino Pro Micro, intended for development into ISP and HVSP using various AVR programming interfaces and protocols.

    52 parts7
  • 2 layers95 × 45 mmHdmi2c, the printed circuit board in 3D

    Hdmi2c

    wlcx/hdmi2c

    A HTTP -> DDC (I2C) bridge

    61 parts6
  • 2 layers136.2 × 85.9 mmBATDATUNIT01, the printed circuit board in 3D

    BATDATUNIT01

    mlab-modules/BATDATUNIT01

    Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.

    225 parts5GPL-3.0
  • 2 layers70.6 × 66.3 mmPrototype Rev-, the printed circuit board in 3D

    Prototype Rev-

    DiegoBriceno03/Portable-Biofeedback

    Portable Biofeedback device for anxiety management

    106 parts3
  • 4 layers43 × 49.8 mmBattery Management System, the printed circuit board in 3D

    Battery Management System

    creid89/PSU_Capstone_Project_2025_BMS

    Battery Management System for PSU Student EPL (Engineering Prototyping Lab)

    137 parts1

Questions

How big is the KaSe PCB?

It measures 296.8 × 145 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KaSe use?

159 parts, built around the ESP32-S3-DEVKITC-1-N8, AP130-33SAG, TLV73333PDBV and BSS83P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KaSe KiCad files?

From the mornepousse/KaSe_PCB repository on GitHub, at the commit this page was made from: the board is V2/KaSe/KaSe.kicad_pcb and its schematic Old/Mae_Keyboard_Dev_Kit/Atreus62-backups/Atreus62-2024-12-10_214151/Atreus62.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KaSe design in my own project?

Its repository states no licence, so its author keeps all rights: ask mornepousse before reusing the design.