
Prototype Rev-
DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

Portable Biofeedback device for anxiety management
5boost is an open-source printed circuit board by DiegoBriceno03, from the DiegoBriceno03/Portable-Biofeedback repository on GitHub. It is a 2-layer board of 74.9 × 29.2 mm with 39 parts on 26 nets, routed with 73 tracks and 87 vias.
It is built around the TPPM0110DWPR. Its parts include 15 capacitors, 9 resistors, 5 connectors, 3 ICs and 2 diodes.
A repository that stores hardware and software files developed for the Portable Biofeedback Device, as worked on and built by students in the Electrical & Computer Engineering (ECE) Department of the College of Engineering & Computer Science (CECS) at the University of Central Florida (UCF) in Orlando, Florida.
The accompanying Android app was developed in Android Studio 3.5.3, making use of Android SDK/API 21 (Android 5).
All the schematics and layout is done in Kicad 5.14 along with custom libraries. These libraries are added under /Libraries.
These projects use custom path for its libraries. The custom Kicad Path variable ${KI_SDREPO} is used to increase portability. Custom variable points to the physical location of the /Libraries directory and must be declared under "Preferences > Configure Paths" setting before use.
Roles are listed under each group member
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C4, C14 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C7, C9, C13 |
| 3 | 10μF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C3, C5 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C15 |
| 2 | 2K | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C12 |
| 1 | 1.78k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 1.8V | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J3 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C10 |
| 1 | 1uH | IHLP2020BZER1R0M01:IHLP2020BZER1R0M01 | L1 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8 |
| 1 | 3.3V | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J2 |
| 1 | 320R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5 |
| 1 | 49.9k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7 |
| 1 | 5.0V | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J1 |
| 1 | 530R | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4 |
| 1 | BQ24072TRGTR | BQ24072TRGTR:BQ24072TRGTR | U3 |
| 1 | Battery Output | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J5 |
| 1 | Charge Disable Switch | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CVS-01xB_W5.9mm_P1mm | SW1 |
| 1 | Charger / Battery Bypass | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | DRC_S-PVSON-N10 | TPS61232DRCR:TPS61232DRCR | U1 |
| 1 | Green | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | Input Current Selection | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_Copal_CHS-02B_W7.62mm_P1.27mm | SW2 |
| 1 | Red | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | TMR OFF | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | TPPM0110DWPR | TPPM0110DWPR:TPPM0110DWPR | U2 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J4 |

DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

DiegoBriceno03/Portable-Biofeedback
Portable Biofeedback device for anxiety management

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ataradov/usb-sniffer-lite
A simple USB sniffer based on Raspberry Pi RP2040

windowsair/wireless-esp8266-dap
CMSIS-DAP compatible wireless debugger for ESP8266/ESP32/ESP32C3/ESP32S3. Optional 40MHz SPI acceleration, etc. 适配多种ESP芯片的无线调试器


lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

It measures 74.9 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the TPPM0110DWPR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DiegoBriceno03/Portable-Biofeedback repository on GitHub, at the commit this page was made from: the board is Breakout-Board-Designs/Power Design Module/PowerDesignModule/5boost.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask DiegoBriceno03 before reusing the design.