

SoundBoxSTM32
All of my pcb projects i have made so far
- Size
- 214 × 174 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 145
- Nets
- 122
- Pads
- 412
- Tracks, vias
- 1,035, 960
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 7 Oct 2026
- Updated
- 5 Nov 2026
Overview
SoundBoxSTM32 is an open-source printed circuit board by DominikNeugebauer, from the DominikNeugebauer/PCB repository on GitHub. It is a 2-layer board of 214 × 174 mm with 145 parts on 122 nets, routed with 1,035 tracks and 960 vias.
It is built around the STM32H573RIT6, DFR0299 and DW01A, with the TLV75733PDBVR-MS, WS2812 and PTS810SJM250SMTRLFS among its other parts. Its parts include 40 capacitors, 27 resistors, 11 diodes, 10 switches and 6 ICs. It belongs with the STM32 boards of this library.
Main components
12STM32H573RIT6
LQFP-64(10x10)-40℃~+85℃ 1.71V~3.6V 250MHz 2MB 32 Bit 53 640KB ARM Cortex-M33 Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)DFR0299
THroughholeTHroughhole V-Audio Modules ROHSDFRobotV-Audio ModulesDW01A
SOT-23-6L-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHSPUOLOPBattery ManagementTLV75733PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedWS2812
SMD5050-4P1.57mm 1000mcd 110mcd 120us 2kHz 3.7V~5.3V 300ns 320mcd 451nm 523nm 5mm 5mm 623nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit Top-mount SMD5050-4P RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)PTS810SJM250SMTRLFS
SMD-4P,4.2x3.2mm-40℃~+85℃ 1.6N 16V 2.5mm 3.2mm 4.2mm 50mA J-Lead Round Button SPST Surface Mount,Vertical SMD-4P,4.2x3.2mm Tactile Switches ROHSC&KTactile Switches1N5819HW-7-F-01
SOD-123Schottky DiodesDiodes IncorporatedAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsECS-80-18-23B-JTN-TR
SMD6035-4P-40℃~+85℃ 18pF 60Ω 8MHz ±20ppm ±20ppm SMD6035-4P Crystals ROHSECSCrystalsFS8205A
SOT-23-6-55℃~+150℃ 1.2V 1.5W 2 N-Channel 20V 31.5mΩ@2.5V 466pF 5.7nC@4.5V 58pF 65pF 6A SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETsOS102011MA1QN1
插件-30℃~+70℃ 10,000 cycles 100mA 12V 8.4mm PC Pin Rectangular Columnar SPDT 插件 Slide Switches ROHSC&KSlide SwitchesSC32S-7PF20PPM
SMD3215-2P-40℃~+85℃ 32.768kHz 70kΩ 7pF Crystal Oscillator ±20ppm SMD3215-2P Crystals ROHSSeikoCrystals
Parts
145| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | MountingHole | MountingHole:MountingHole_5.3mm_M5 | H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25 +20 |
| 26 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C10, C18, C19, C20, C22, C23, C26, C27, C28, C29, C30, C31, C32, C33 +10 |
| 12 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R7, R9, R11, R13, R15, R17, R19, R21, R23, R25, R27 |
| 11 | 100 | Resistor_SMD:R_0603_1608Metric | R6, R8, R10, R12, R14, R16, R18, R20, R22, R24, R26 |
| 10 | WS2812 | LED_SMD:LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm | LED0, LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, STATUS_LED1 |
| 9 | SW_SPDT | Button_Switch_THT:D2F-01L_OMR | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_5.3mm_M5_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C15, C16, C21 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C24, C25 |
| 2 | 10pF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 27pF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 2u2F | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | PTS810_SJM_250_SMTR_LFS | Button_Switch_SMD:PTS810_SJM_250_SMTR_LFS | SW_GPIO1, SWSW_CHIP_PU1 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100uF | Capacitor_SMD:C_0603_1608Metric | C40 |
| 1 | 1043 | Battery:1043_KEY | U3 |
| 1 | 1N5819HW-7-F | Diode_SMD:1N5819HW-7-F | D5 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 470 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 4u7F | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | AO3401A | Transformer_SMD:PMOS-SOT23-3 | Q3 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Speaker1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | DFR0299 | Module:DFR0299 | U2 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U4 |
| 1 | ECS-80-18-23B-JTN-TR | Crystal:XTAL_ECS-80-18-23B-JTN-TR | Y1 |
| 1 | FS8205A | Transistor_Power:FS8205A | Q2 |
| 1 | LOGO | LOGO | G*** |
| 1 | OS102011MA1QN1 | Valve:OS102011MA1QN1 | SW1 |
| 1 | SC32S-7PF20PPM | Crystal:XTAL_SC32S-7PF20PPM_EPS | XTAL1 |
| 1 | STM32H573RIT6 | Module:STM32H573RIT6 | U1 |
| 1 | TLV75733PDBVR | Battery:SOT95P280X145-5N_TLV75733PDBVR | U6 |
| 1 | TPS3840DL35DBVR | Package_TO_SOT_SMD:SOT-23-5 | U5 |
More from DominikNeugebauer/PCB
6- 2 layers71.3 × 94.1 mm

- 2 layers214 × 174 mm

- 2 layers62.5 × 35 mm

- 2 layers38.4 × 19.3 mm

- 2 layers39.3 × 15.4 mm

- 2 layers46 × 41.5 mm

Similar boards
- 4 layers47.8 × 35.1 mm

- 4 layers70 × 50 mm

DumbFCC
Curtis-05/DumbFCC
Custom Flight controller for ENG 4012 Aerospace Design Project 4 2025/26 via Glasgow University.
79 partsMIT - 2 layers49.8 × 75.8 mm

- 4 layers40 × 40 mm

AeroHawk FC
sbbxiii/The-Eagle
The Eagle: Custom STM32F405 4-Layer Autonomous Avionics Flight Controller PCB
76 parts1MIT - 2 layers112.7 × 121.4 mm

- 2 layers108 × 60.9 mm

MotionBoy
CaseyRasor/custom_esp32_screen_header
Custom ESP32 PCB with screen header for 4" tft display and gpio headers
57 parts - 2 layers53.8 × 38.9 mm

ESP 32 LM
Quisqueya-Len/Electiva-LM
Repositorio correspondiente a la materia Electiva Mecatrónica C3-2024 Luis Molina
27 partsMIT - 2 layers52.8 × 69 mm

MuntsorteerderESP
TiebeDeclercq/Munt-sorteer--en-opslagsysteem
A coin-counting, storing, and dispensing system. View the blog »
53 parts
Questions
How big is the SoundBoxSTM32 PCB?
It measures 214 × 174 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SoundBoxSTM32 use?
145 parts, built around the STM32H573RIT6, DFR0299, DW01A and TLV75733PDBVR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SoundBoxSTM32 KiCad files?
From the DominikNeugebauer/PCB repository on GitHub, at the commit this page was made from: the board is SoundBoxSTM32/SoundBoxSTM32.kicad_pcb and its schematic BeerCounter/BeerCounter/BeerCounter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SoundBoxSTM32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask DominikNeugebauer before reusing the design.