
Boards using the KSZ9031RNXCA
30 boardsBoards in 25 GitHub repositories, designed in KiCad, that use the KSZ9031RNXCA by Microchip Technology (0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHS). See how each wires it, with its parts, size, README and files; the KSZ9031RNXCA’s symbol, footprint and pinout are on its own page.
- 4 layers160 × 62 mm

- 8 layers90 × 120.4 mm

Artix dc scm
antmicro/artix-dc-scm
Experimental Xilinx Artix-7 driven Data Center Security Communication Module
546 parts72Apache-2.0 - 4 layers117.9 × 99.1 mm

GNSS Firehose
pmonta/GNSS_Firehose
Wideband front-end digitizer for GPS, GLONASS, Galileo, BeiDou
519 parts69 - 6 layers112 × 98 mm

- 12 layers55 × 40 mm

- 12 layers152.9 × 90 mm

Data center rdimm ddr4-tester
antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.
691 parts32Apache-2.0 - 8 layers90 × 120.4 mm

Ecp5-dc scm
antmicro/ecp5-dc-scm
Experimental Lattice ECP5-driven Data Center Security Communication Module
506 parts23Apache-2.0 - 6 layers91.8 × 139.8 mm

- 10 layers130 × 90 mm

- 8 layers154 × 125 mm

- 4 layers87 × 59.8 mm

- 8 layers90 × 65 mm

Digital board v1
es-ude/elasticai.hardware
Schematics and Board design for ElasticNodeHardware
261 parts4MIT - 8 layers117.3 × 121.3 mm

FPGA dev board
LZajmi/Artix-7-FPGA-Dev-Board
This repository contains the design files for the custom Artix-7 XC7A100T-FGG484 FPGA development board. This board is built for high-performance applications such as hardware acceleration, video processing, data…
366 parts3 - 8 layers68 × 67.8 mm

Reform kintex
kitspace-forks/reform-kintex-som
This is the open hardware system-on-module featuring the Xilinx/AMD Kintex-7 FPGA (XC7K160T or XC7K325T) and 2GB DDR3 RAM.
297 parts2 - 2 layers

- 4 layers81.9 × 35.3 mm

USB3 ethernet
AyushShuklaaa7/USB3_Ethernet_Interface
High-speed USB 3.1 Gen 1 to Gigabit Ethernet interface PCB designed in KiCad using the Microchip LAN7801 and KSZ9031RNX.
81 partsMIT - 8 layers230 × 145.3 mm

OptiLogic-16-Pro
HexFud/OptiLogic-16-Pro
A logic analyzer with 16 channels that can also watch two fiber network links at the same time
342 parts - 4 layers111 × 30 mm

USB3 to RGMII LAN7801
sohambhanare/USB-3.1-to-Gigabit-Ethernet-Adapter-using-LAN7801-IC
KiCad design of a USB 3.1 Gen 1 to Gigabit Ethernet adapter based on the LAN7801 and KSZ9031RNX. Includes schematic, 4-layer impedance-controlled PCB layout, power supply design, simulations, and manufacturing Gerbers.
81 parts - 4 layers91 × 83 mm

- 4 layers140 × 100 mm

- 6 layers55 × 40 mm

- 10 layers151 × 111 mm

Switch engine
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
369 parts36BSD-3-Clause - 4 layers100.5 × 62.5 mm

Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 6 layers90 × 94.5 mm

Fpga stm32-ifaces
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
274 parts17BSD-3-Clause