
KSZ9031RNXCA
Microchip TechnologyExtended
0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHS
- Part id
- microchip/KSZ9031RNXCA
- Category
- Ethernet Transceivers
- Package
- QFN-48-EP(7x7)
- Pins
- 49
- In stock
- 11 at JLCPCB (C58758)
- Used on
- 30 open-source boards
Overview
The KSZ9031RNXCA is an ethernet Transceiver made by Microchip Technology in a QFN-48-EP(7x7) package with 49 pins. 0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHS.
PCBKit's library has its KiCad symbol (Interface_Ethernet:KSZ9031RNXCA, from KiCad's library) and its footprint (Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm, from KiCad's library), ready for a KiCad board. 11 are in stock at JLCPCB (part C58758). 30 open-source boards in 25 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
21- Supply, least
- 1.14 V · DVDDL, AVDDL, AVDDL_PLL, recommended operating min · p. 65
- Supply, most
- 1.26 V · DVDDL, AVDDL, AVDDL_PLL, recommended operating max · p. 65
- Supply, absolute maximum
- 1.8 V · DVDDL, AVDDL, AVDDL_PLL, absolute max · p. 65
- Supply, least
- 3.135 V · AVDDH, 3.3V operation recommended min · p. 65
- Supply, most
- 3.465 V · AVDDH, 3.3V operation recommended max · p. 65
- Supply, least
- 2.375 V · AVDDH, 2.5V commercial operation recommended min · p. 65
- Supply, most
- 2.625 V · AVDDH, 2.5V commercial operation recommended max · p. 65
- Supply, absolute maximum
- 5 V · AVDDH, absolute max · p. 65
- Supply, least
- 1.71 V · DVDDH, 1.8V operation recommended min · p. 65
- Supply, most
- 1.89 V · DVDDH, 1.8V operation recommended max · p. 65
- Works from
- 0 °C · Ambient, commercial grade min · p. 65
- Works up to
- 70 °C · Ambient, commercial grade max · p. 65
- Junction, hottest
- 125 °C · Junction temperature max · p. 65
- Junction to air (48-Pin QFN)
- 36.34 K/W · Junction to ambient · p. 65
- Junction to case (48-Pin QFN)
- 9.47 K/W · Junction to case · p. 65
- Takes working
- 328.8 mA · sum of core, 3.3V I/O and 3.3V transceiver; typical 1000Base-T full-duplex at 100% utilization · p. 65
- Takes at most
- 328.8 mA · sum of core, 3.3V I/O and 3.3V transceiver; typical 1000Base-T full-duplex at 100% utilization · p. 65
- Takes asleep
- 14.5 mA · sum of core, 3.3V I/O and 3.3V transceiver; typical software power-down · p. 66
- Data rate, most
- 1 Gbit/s · Ethernet link speed max · p. 1
- Edge
- 4 ns · 100Base-TX output rise/fall time typical · p. 16
- Takes asleep
- 2.92 mA · sum of core, 3.3V digital I/O and 3.3V transceiver typical, chip power-down · p. 66
What it is and has
12- RGMII I/O voltages
- 3.3V/2.5V/1.8V tolerant · p. 1
- Jumbo frames
- Up to 16KB · p. 1
- Reference clock output
- 125MHz · p. 1
- Wake-On-LAN
- Supported · p. 1
- Diagnostics
- Loopback modes · p. 2
- Management interface
- MDC/MDIO · p. 2
- Interrupt
- Interrupt pin option · p. 2
- Power management
- Power-down and power-saving modes · p. 2
- Package
- 48-pin QFN, 7mm × 7mm · p. 2
- Ethernet interface
- 10Base-T/100Base-TX/1000Base-T · p. 1
- MAC interface
- RGMII · p. 1
- Reference clock
- 25MHz for all operating modes · p. 77
Around it
4- res 1.0kΩ to 4.7kΩ
- between MDIO and DVDDH; External pull-up resistor required. · p. 12
- res 1.0kΩ to 4.7kΩ
- between INT_N/PME_N2 and DVDDH; External pull-up required for active-low interrupt and PME functions. · p. 12
- crystal 25MHz
- between XI and XO; Crystal or external clock source; crystal selection specifies typical 40 Ω series resistance and 22 pF load capacitance, maximum ±50 ppm frequency tolerance. · p. 77
- res 12.1kΩ
- between ISET and GND; Transmitter drive-setting resistor; reference voltage is typically 1.2 V. · p. 68
Specifications
196| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply Voltage VIN | DVDDL, AVDDL, AVDDL_PLL | min -0.5 · max 1.8 V | 65 |
| Supply Voltage VIN | AVDDH | min -0.5 · max 5 V | 65 |
| Supply Voltage VIN | DVDDH | min -0.5 · max 5 V | 65 |
| Input Voltage | all inputs | min -0.5 · max 5 V | 65 |
| Output Voltage | all outputs | min -0.5 · max 5 V | 65 |
| Lead Temperature | soldering, 10s | max 260 °C | 65 |
| Storage Temperature TS | min -55 · max 150 °C | 65 | |
| Supply Voltage | AVDDH @ 3.3V | min 3.135 · max 3.465 V | 65 |
| Supply Voltage | AVDDH @ 2.5V, C-temp only | min 2.375 · max 2.625 V | 65 |
| Supply Voltage | DVDDH @ 3.3V | min 3.135 · max 3.465 V | 65 |
| Supply Voltage | DVDDH @ 2.5V | min 2.375 · max 2.625 V | 65 |
| Supply Voltage | DVDDH @ 1.8V | min 1.71 · max 1.89 V | 65 |
| Ambient Temperature TA | Commercial: KSZ9031RNXC | min 0 · max 70 °C | 65 |
| Maximum Junction Temperature TJ_MAX | max 125 °C | 65 | |
| Thermal Resistance θJA | typ 36.34 °C/W | 65 | |
| Thermal Resistance θJC | typ 9.47 °C/W | 65 | |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; 1000Base-T link-up (no traffic) | typ 210 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; 1000Base-T full-duplex @ 100% utilization | typ 221 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; 100Base-TX link-up (no traffic) | typ 63.6 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; 100Base-TX full-duplex @ 100% utilization | typ 63.8 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; 10Base-T link-up (no traffic) | typ 7.1 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; 10Base-T full-duplex @ 100% utilization | typ 7.7 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; Software power-down mode (Reg. 0.11 = 1) | typ 1 mA | 65 |
| 1.2V Total of: DVDDL (digital core) + AVDDL (analog core) + AVDDL_PLL (PLL) ICORE | TA = 25°C; Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.7 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; 1000Base-T link-up (no traffic) | typ 11.2 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; 1000Base-T full-duplex @ 100% utilization | typ 23.6 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; 100Base-TX link-up (no traffic) | typ 8.4 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; 100Base-TX full-duplex @ 100% utilization | typ 9.8 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; 10Base-T link-up (no traffic) | typ 3.6 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; 10Base-T full-duplex @ 100% utilization | typ 5.6 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; Software power-down mode (Reg. 0.11 = 1) | typ 5.5 mA | 65 |
| 1.8V for Digital I/Os (RGMII operating @ 1.8V) IDVDDH_1.8 | TA = 25°C; Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.3 mA | 65 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; 1000Base-T link-up (no traffic) | typ 14.7 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; 1000Base-T full-duplex @ 100% utilization | typ 31.5 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; 100Base-TX link-up (no traffic) | typ 10.5 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; 100Base-TX full-duplex @ 100% utilization | typ 13 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; 10Base-T link-up (no traffic) | typ 6.3 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; 10Base-T full-duplex @ 100% utilization | typ 9 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; Software power-down mode (Reg. 0.11 = 1) | typ 6.7 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | TA = 25°C; Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.7 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; 1000Base-T link-up (no traffic) | typ 19.5 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; 1000Base-T full-duplex @ 100% utilization | typ 41.5 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; 100Base-TX link-up (no traffic) | typ 13.9 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; 100Base-TX full-duplex @ 100% utilization | typ 17.2 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; 10Base-T link-up (no traffic) | typ 11.5 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; 10Base-T full-duplex @ 100% utilization | typ 13.7 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; Software power-down mode (Reg. 0.11 = 1) | typ 9.3 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | TA = 25°C; Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 2.2 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; 1000Base-T link-up (no traffic) | typ 58.8 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; 1000Base-T full-duplex @ 100% utilization | typ 57.9 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; 100Base-TX link-up (no traffic) | typ 24.9 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; 100Base-TX full-duplex @ 100% utilization | typ 24.9 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; 10Base-T link-up (no traffic) | typ 11.5 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; 10Base-T full-duplex @ 100% utilization | typ 25.3 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; Software power-down mode (Reg. 0.11 = 1) | typ 3.1 mA | 66 |
| 2.5V for Transceiver IAVDDH_2.5 | TA = 25°C; commercial temperature range only; Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.02 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; 1000Base-T link-up (no traffic) | typ 67.4 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; 1000Base-T full-duplex @ 100% utilization | typ 66.3 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; 100Base-TX link-up (no traffic) | typ 28.7 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; 100Base-TX full-duplex @ 100% utilization | typ 28.6 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; 10Base-T link-up (no traffic) | typ 15.9 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; 10Base-T full-duplex @ 100% utilization | typ 28.6 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; Software power-down mode (Reg. 0.11 = 1) | typ 4.2 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | TA = 25°C; Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.02 mA | 66 |
| Input High Voltage VIH | TA = 25°C; CMOS inputs; DVDDH (digital I/Os) = 3.3V | min 2 V | 67 |
| Input High Voltage VIH | TA = 25°C; CMOS inputs; DVDDH (digital I/Os) = 2.5V | min 1.5 V | 67 |
| Input High Voltage VIH | TA = 25°C; CMOS inputs; DVDDH (digital I/Os) = 1.8V | min 1.1 V | 67 |
| Input Low Voltage VIL | TA = 25°C; CMOS inputs; DVDDH (digital I/Os) = 3.3V | max 1.3 V | 67 |
| Input Low Voltage VIL | TA = 25°C; CMOS inputs; DVDDH (digital I/Os) = 2.5V | max 1 V | 67 |
| Input Low Voltage VIL | TA = 25°C; CMOS inputs; DVDDH (digital I/Os) = 1.8V | max 0.7 V | 67 |
| Input High Leakage Current IIHL | TA = 25°C; DVDDH = 3.3V and VIH = 3.3V; All digital input pins | min -2 · max 2 uA | 67 |
| Input Low Leakage Current IILL | TA = 25°C; DVDDH = 3.3V and VIL = 0.0V; All digital input pins, except MDC, MDIO, RESET_N | min -2 · max 2 uA | 67 |
| Input Low Leakage Current IILL | TA = 25°C; DVDDH = 3.3V and VIL = 0.0V; MDC, MDIO, RESET_N pins with internal pull-ups | min -120 · max -40 uA | 67 |
| Output High Voltage VOH | TA = 25°C; DVDDH (digital I/Os) = 3.3V, IOH (min) = 10mA; All digital output pins | min 2.7 V | 67 |
| Output High Voltage VOH | TA = 25°C; DVDDH (digital I/Os) = 2.5V, IOH (min) = 10mA; All digital output pins | min 2 V | 67 |
| Output High Voltage VOH | TA = 25°C; DVDDH (digital I/Os) = 1.8V, IOH (min) = 13mA; All digital output pins, except LED1, LED2 | min 1.5 V | 67 |
| Output Low Voltage VOL | TA = 25°C; DVDDH (digital I/Os) = 3.3V, IOL (min) = 10mA; All digital output pins | max 0.3 V | 67 |
| Output Low Voltage VOL | TA = 25°C; DVDDH (digital I/Os) = 2.5V, IOL (min) = 10mA; All digital output pins | max 0.3 V | 67 |
| Output Low Voltage VOL | TA = 25°C; DVDDH (digital I/Os) = 1.8V, IOL (min) = 13mA; All digital output pins, except LED1, LED2 | max 0.3 V | 67 |
| Output Tri-State Leakage |Ioz| | TA = 25°C | max 10 uA | 67 |
| Output Drive Current ILED | TA = 25°C; DVDDH (digital I/Os) = 3.3V or 2.5V and VOL at 0.3V; Each LED pin (LED1, LED2) | min 10 mA | 67 |
| Internal Pull-Up Resistance (MDC, MDIO, RESET_N pins) pu | TA = 25°C; pin input voltage level at 1/2 DVDDH; DVDDH (digital I/Os) = 3.3V | min 13 · typ 22 · max 31 kΩ | 67 |
| Internal Pull-Up Resistance (MDC, MDIO, RESET_N pins) pu | TA = 25°C; pin input voltage level at 1/2 DVDDH; DVDDH (digital I/Os) = 2.5V | min 16 · typ 28 · max 39 kΩ | 67 |
| Internal Pull-Up Resistance (MDC, MDIO, RESET_N pins) pu | TA = 25°C; pin input voltage level at 1/2 DVDDH; DVDDH (digital I/Os) = 1.8V | min 26 · typ 44 · max 62 kΩ | 67 |
| Peak Differential Output Voltage VO | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer; 100Ω termination across differential output | min 0.95 · max 1.05 V | 68 |
| Output Voltage Imbalance VIMB | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer; 100Ω termination across differential output | max 2 % | 68 |
| Rise/Fall Time tr , tf | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer | min 3 · max 5 ns | 68 |
| Rise/Fall Time Imbalance | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer | min 0 · max 0.5 ns | 68 |
| Duty Cycle Distortion | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer; maximum ±0.25 ns | max 0.25 ns | 68 |
| Overshoot | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer | max 5 % | 68 |
| Output Jitter | TA = 25°C; 100Base-TX Transmit; measured differentially after 1:1 transformer; Peak-to-peak | typ 0.7 ns | 68 |
| Peak Differential Output Voltage VP | TA = 25°C; 10Base-T Transmit; measured differentially after 1:1 transformer; 100Ω termination across differential output | min 2.2 · max 2.8 V | 68 |
| Jitter Added | TA = 25°C; 10Base-T Transmit; measured differentially after 1:1 transformer; Peak-to-peak | max 3.5 ns | 68 |
| Harmonic Rejection | TA = 25°C; 10Base-T Transmit; measured differentially after 1:1 transformer; Transmit all-one signal sequence | typ -31 dB | 68 |
| Squelch Threshold VSQ | TA = 25°C; 10Base-T Receive; 5MHz square wave | min 300 · typ 400 mV | 68 |
| Reference Voltage of ISET VSET | TA = 25°C; Transmitter – Drive Setting; R(ISET) = 12.1kΩ | typ 1.2 V | 68 |
| Output Drive Range for LDO_O (Pin 43) to Gate Input of P-Channel MOSFET VLDO_O | TA = 25°C; AVDDH = 3.3V for MOSFET source voltage | min 0.85 · max 2.8 V | 68 |
| Output Drive Range for LDO_O (Pin 43) to Gate Input of P-Channel MOSFET VLDO_O | TA = 25°C; AVDDH = 2.5V for MOSFET source voltage; recommended for commercial temperature range operation only | min 0.85 · max 2 V | 68 |
| Transmit burst interval | normal operating conditions | typ 16 ms | 21 |
| Transmit pulse interval | normal operating conditions | typ 68 us | 21 |
| FLP detect minimum time | normal operating conditions | min 17.2 us | 21 |
| FLP detect maximum time | normal operating conditions | max 185 us | 21 |
| Receive minimum burst interval | normal operating conditions | min 6.8 ms | 21 |
| Receive maximum burst interval | normal operating conditions | max 112 ms | 21 |
| Data detect minimum interval | normal operating conditions | min 35.4 us | 21 |
| Data detect maximum interval | normal operating conditions | max 95 us | 21 |
| NLP test minimum interval | normal operating conditions | min 4.5 ms | 21 |
| NLP test maximum interval | normal operating conditions | max 30 ms | 21 |
| Link loss time | normal operating conditions | typ 52 ms | 21 |
| Break link time | normal operating conditions | typ 1480 ms | 21 |
| Parallel detection wait time | normal operating conditions | typ 830 ms | 21 |
| Link enable wait time | normal operating conditions | typ 1000 ms | 21 |
| Supply Voltage (VIN) VIN | DVDDL, AVDDL, AVDDL_PLL | min -0.5 · max 1.8 V | 65 |
| Supply Voltage (VIN) VIN | AVDDH | min -0.5 · max 5 V | 65 |
| Supply Voltage (VIN) VIN | DVDDH | min -0.5 · max 5 V | 65 |
| Input Voltage (all inputs) | min -0.5 · max 5 V | 65 | |
| Output Voltage (all outputs) | min -0.5 · max 5 V | 65 | |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | 1000Base-T link-up (no traffic) | typ 14.7 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | 1000Base-T full-duplex @ 100% utilization | typ 31.5 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | 100Base-TX link-up (no traffic) | typ 10.5 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | 100Base-TX full-duplex @ 100% utilization | typ 13 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | 10Base-T link-up (no traffic) | typ 6.3 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | 10Base-T full-duplex @ 100% utilization | typ 9 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | Software power-down mode (Reg. 0.11 = 1) | typ 6.7 mA | 66 |
| 2.5V for Digital I/Os (RGMII operating @ 2.5V) IDVDDH_2.5 | Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.7 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | 1000Base-T link-up (no traffic) | typ 19.5 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | 1000Base-T full-duplex @ 100% utilization | typ 41.5 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | 100Base-TX link-up (no traffic) | typ 13.9 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | 100Base-TX full-duplex @ 100% utilization | typ 17.2 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | 10Base-T link-up (no traffic) | typ 11.5 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | 10Base-T full-duplex @ 100% utilization | typ 13.7 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | Software power-down mode (Reg. 0.11 = 1) | typ 9.3 mA | 66 |
| 3.3V for Digital I/Os (RGMII operating @ 3.3V) IDVDDH_3.3 | Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 2.2 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | 1000Base-T link-up (no traffic) | typ 58.8 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | 1000Base-T full-duplex @ 100% utilization | typ 57.9 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | 100Base-TX link-up (no traffic) | typ 24.9 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | 100Base-TX full-duplex @ 100% utilization | typ 24.9 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | 10Base-T link-up (no traffic) | typ 11.5 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | 10Base-T full-duplex @ 100% utilization | typ 25.3 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | Software power-down mode (Reg. 0.11 = 1) | typ 3.1 mA | 66 |
| 2.5V for Transceiver (Recommended for commercial temperature range operation only) IAVDDH_2.5 | Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.02 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | 1000Base-T link-up (no traffic) | typ 67.4 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | 1000Base-T full-duplex @ 100% utilization | typ 66.3 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | 100Base-TX link-up (no traffic) | typ 28.7 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | 100Base-TX full-duplex @ 100% utilization | typ 28.6 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | 10Base-T link-up (no traffic) | typ 15.9 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | 10Base-T full-duplex @ 100% utilization | typ 28.6 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | Software power-down mode (Reg. 0.11 = 1) | typ 4.2 mA | 66 |
| 3.3V for Transceiver IAVDDH_3.3 | Chip power-down mode (strap-in pins MODE[3:0] = 0111) | typ 0.02 mA | 66 |
| Input High Voltage VIH | DVDDH (digital I/Os) = 3.3V | min 2 V | 67 |
| Input High Voltage VIH | DVDDH (digital I/Os) = 2.5V | min 1.5 V | 67 |
| Input High Voltage VIH | DVDDH (digital I/Os) = 1.8V | min 1.1 V | 67 |
| Input Low Voltage VIL | DVDDH (digital I/Os) = 3.3V | max 1.3 V | 67 |
| Input Low Voltage VIL | DVDDH (digital I/Os) = 2.5V | max 1 V | 67 |
| Input Low Voltage VIL | DVDDH (digital I/Os) = 1.8V | max 0.7 V | 67 |
| Input High Leakage Current IIHL | DVDDH = 3.3V and VIH = 3.3V; All digital input pins | min -2 · max 2 uA | 67 |
| Input Low Leakage Current IILL | DVDDH = 3.3V and VIL = 0.0V; All digital input pins, except MDC, MDIO, RESET_N. | min -2 · max 2 uA | 67 |
| Input Low Leakage Current IILL | DVDDH = 3.3V and VIL = 0.0V; MDC, MDIO, RESET_N pins with internal pull-ups | min -120 · max -40 uA | 67 |
| Output High Voltage VOH | DVDDH (digital I/Os) = 3.3V, IOH (min) = 10mA; All digital output pins | min 2.7 V | 67 |
| Output High Voltage VOH | DVDDH (digital I/Os) = 2.5V, IOH (min) = 10mA; All digital output pins | min 2 V | 67 |
| Output High Voltage VOH | DVDDH (digital I/Os) = 1.8V, IOH (min) = 13mA; All digital output pins, except LED1, LED2 | min 1.5 V | 67 |
| Output Low Voltage VOL | DVDDH (digital I/Os) = 3.3V, IOL (min) = 10mA; All digital output pins | max 0.3 V | 67 |
| Output Low Voltage VOL | DVDDH (digital I/Os) = 2.5V, IOL (min) = 10mA; All digital output pins | max 0.3 V | 67 |
| Output Low Voltage VOL | DVDDH (digital I/Os) = 1.8V, IOL (min) = 13mA; All digital output pins, except LED1, LED2 | max 0.3 V | 67 |
| Output Tri-State Leakage |Ioz| | max 10 uA | 67 | |
| Output Drive Current ILED | DVDDH (digital I/Os) = 3.3V or 2.5V and VOL at 0.3V; Each LED pin (LED1, LED2) | min 10 mA | 67 |
| Internal Pull-Up Resistance (MDC, MDIO, RESET_N pins) pu | Measured with pin input voltage level at 1/2 DVDDH; DVDDH (digital I/Os) = 3.3V | min 13 · typ 22 · max 31 kΩ | 67 |
| Internal Pull-Up Resistance (MDC, MDIO, RESET_N pins) pu | Measured with pin input voltage level at 1/2 DVDDH; DVDDH (digital I/Os) = 2.5V | min 16 · typ 28 · max 39 kΩ | 67 |
| Internal Pull-Up Resistance (MDC, MDIO, RESET_N pins) pu | Measured with pin input voltage level at 1/2 DVDDH; DVDDH (digital I/Os) = 1.8V | min 26 · typ 44 · max 62 kΩ | 67 |
| Peak Differential Output Voltage VO | 100Base-TX Transmit; Measured differentially after 1:1 transformer; 100Ω termination across differential output | min 0.95 · max 1.05 V | 68 |
| Output Voltage Imbalance VIMB | 100Base-TX Transmit; Measured differentially after 1:1 transformer; 100Ω termination across differential output | max 2 % | 68 |
| Rise/Fall Time tr , tf | 100Base-TX Transmit; Measured differentially after 1:1 transformer | min 3 · max 5 ns | 68 |
| Rise/Fall Time Imbalance | 100Base-TX Transmit; Measured differentially after 1:1 transformer | min 0 · max 0.5 ns | 68 |
| Duty Cycle Distortion | 100Base-TX Transmit; Measured differentially after 1:1 transformer | max 0.25 ns | 68 |
| Overshoot | 100Base-TX Transmit; Measured differentially after 1:1 transformer | max 5 % | 68 |
| Output Jitter | 100Base-TX Transmit; Measured differentially after 1:1 transformer; Peak-to-peak | typ 0.7 ns | 68 |
| Peak Differential Output Voltage VP | 10Base-T Transmit; Measured differentially after 1:1 transformer; 100Ω termination across differential output | min 2.2 · max 2.8 V | 68 |
| Jitter Added | 10Base-T Transmit; Measured differentially after 1:1 transformer; Peak-to-peak | max 3.5 ns | 68 |
| Harmonic Rejection | 10Base-T Transmit; Measured differentially after 1:1 transformer; Transmit all-one signal sequence | typ -31 dB | 68 |
| Squelch Threshold VSQ | 10Base-T Receive; 5MHz square wave | min 300 · typ 400 mV | 68 |
| Reference Voltage of ISET VSET | R(ISET) = 12.1kΩ | typ 1.2 V | 68 |
| Output Drive Range for LDO_O (Pin 43) to Gate Input of P-Channel MOSFET VLDO_O | AVDDH = 3.3V for MOSFET source voltage | min 0.85 · max 2.8 V | 68 |
| Output Drive Range for LDO_O (Pin 43) to Gate Input of P-Channel MOSFET VLDO_O | AVDDH = 2.5V for MOSFET source voltage (recommended for commercial temperature range operation only) | min 0.85 · max 2 V | 68 |
| Supply voltages rise time (must be monotonic) tVR | min 200 us | 74 | |
| Stable supply voltages to de-assertion of reset tSR | min 10 ms | 74 | |
| Strap-in pin configuration setup time tCS | min 5 ns | 74 | |
| Strap-in pin configuration hold time tCH | min 5 ns | 74 | |
| De-assertion of reset to strap-in pin output tRC | min 6 ns | 74 | |
| Supply voltages cycle off-to-on time tPC | min 150 ms | 74 | |
| Frequency | typ 25 MHz | 77 | |
| Frequency tolerance (maximum) | ±50 ppm | max 50 ppm | 77 |
| Crystal series resistance (typical) | typ 40 Ω | 77 | |
| Crystal load capacitance (typical) | typ 22 pF | 77 | |
| Open-circuit inductance (minimum) | 100mV, 100kHz, 8mA | min 350 uH | 79 |
| Insertion loss (maximum) | 0MHz to 100MHz | max 1 dB | 79 |
| HIPOT (minimum) | min 1500 Vrms | 79 |
Pins, by the datasheet
19- 1 AVDDH
- 3.3V/2.5V analog VDD; 2.5V is for commercial temperature only. · p. 9
- 2 TXRXP_A
- MDI pair A positive; BI_DA+ in MDI and BI_DB+ in MDI-X at 1000Base-T; TX+ in MDI and RX+ in MDI-X at 10/100. · p. 9
- 3 TXRXM_A
- MDI pair A negative; BI_DA– in MDI and BI_DB– in MDI-X at 1000Base-T; TX– in MDI and RX– in MDI-X at 10/100. · p. 9
- 4 AVDDL
- 1.2V analog VDD. · p. 9
- 5 TXRXP_B
- MDI pair B positive; BI_DB+ in MDI and BI_DA+ in MDI-X at 1000Base-T; RX+ in MDI and TX+ in MDI-X at 10/100. · p. 9
- 6 TXRXM_B
- MDI pair B negative; BI_DB– in MDI and BI_DA– in MDI-X at 1000Base-T; RX– in MDI and TX– in MDI-X at 10/100. · p. 9
- 7 TXRXP_C
- MDI pair C positive; BI_DC+ in MDI and BI_DD+ in MDI-X at 1000Base-T; unused at 10/100. · p. 9
- 29 VSS
- Digital ground. · p. 12
- 30 DVDDL
- 1.2V digital VDD. · p. 12
- 34 DVDDH
- 3.3V, 2.5V, or 1.8V digital VDD_I/O. · p. 12
- 36 MDC
- Management data clock input with internal pull-up; reference clock for MDIO. · p. 12
- 37 MDIO
- Management data input/output with internal pull-up, synchronous to MDC; requires external 1.0kΩ to 4.7kΩ pull-up to DVDDH. · p. 12
- 38 INT_N/PME_N2
- Programmable interrupt or active-low WOL event output; interrupt polarity is programmable; requires 1.0kΩ to 4.7kΩ pull-up to DVDDH for active-low interrupt and PME functions; not open-drain. · p. 3
- 39 DVDDL
- 1.2V digital VDD. · p. 12
- 40 DVDDH
- 3.3V, 2.5V, or 1.8V digital VDD_I/O. · p. 12
- 42 RESET_N
- Active-low chip reset with internal pull-up; hardware configurations are strapped at the rising edge. · p. 12
- 43 LDO_O
- 1.2V LDO controller output driving a P-channel MOSFET gate to generate core voltage; may float when external 1.2V is supplied. · p. 12
- 44 AVDDL_PLL
- 1.2V analog VDD for PLL. · p. 12
- 45 XO
- 25MHz crystal feedback; leave unconnected when an oscillator or external clock is used. · p. 12
Ordering codes, by the datasheet
7- KSZ9031RNXCA
- 48-Pin QFN · Commercial, 0°C to 70°C, Pb-Free, gold wire bonding · p. 2
- KSZ9031RNXCC
- 48-Pin QFN · Commercial, 0°C to 70°C, Pb-Free, copper wire bonding · p. 2
- KSZ9031RNXIA
- 48-Pin QFN · Industrial, −40°C to 85°C, Pb-Free, gold wire bonding · p. 2
- KSZ9031RNXIC
- 48-Pin QFN · Industrial, −40°C to 85°C, Pb-Free, copper wire bonding · p. 2
- KSZ9031RNXUA
- 48-Pin WQFN · AEC-Q100 automotive qualified to 85°C, −40°C to 85°C, Pb-Free, gold wire bonding · p. 2
- KSZ9031RNXVA
- 48-Pin WQFN · AEC-Q100 automotive qualified to 105°C, −40°C to 105°C, Pb-Free, gold wire bonding · p. 2
- KSZ9031RNX-EVAL
- 48-Pin QFN · Evaluation board mounted with a commercial-temperature KSZ9031RNX; 0°C to 70°C, Pb-Free · p. 2
- 4 layers160 × 62 mm

- 8 layers90 × 120.4 mm

Artix dc scm
antmicro/artix-dc-scm
Experimental Xilinx Artix-7 driven Data Center Security Communication Module
546 parts72Apache-2.0 - 4 layers117.9 × 99.1 mm

GNSS Firehose
pmonta/GNSS_Firehose
Wideband front-end digitizer for GPS, GLONASS, Galileo, BeiDou
519 parts69 - 6 layers112 × 98 mm

- 12 layers55 × 40 mm

- 12 layers152.9 × 90 mm

Data center rdimm ddr4-tester
antmicro/rdimm-ddr4-tester
Experimental platform built around Xilinx Kintex-7 FPGA for development and customization of RAM controllers supporting RDIMM DDR4 RAM modules used in data centers.
691 parts32Apache-2.0 - 8 layers90 × 120.4 mm

Ecp5-dc scm
antmicro/ecp5-dc-scm
Experimental Lattice ECP5-driven Data Center Security Communication Module
506 parts23Apache-2.0 - 6 layers91.8 × 139.8 mm

Questions
Is there a KiCad symbol and footprint for the KSZ9031RNXCA?
Yes. The symbol is Interface_Ethernet:KSZ9031RNXCA and the footprint Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the KSZ9031RNXCA?
QFN-48-EP(7x7), with 49 pins. Its footprint is drawn on this page.
Where is the KSZ9031RNXCA datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the KSZ9031RNXCA?
JLCPCB lists it as part C58758, with 11 in stock; the sellers' links on this page open their listings.
Which open-source boards use the KSZ9031RNXCA?
30 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.