

Ulx5m gs panel checked v002
ULX5M with GateMate with SDRAM
- Size
- 112 × 98 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 1,278
- Nets
- 1,376
- Pads
- 5,314
- Tracks, vias
- 29,648, 3,416
- Pours
- 184
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Mar 2025
- Updated
- 25 Oct 2026
Overview
Ulx5m gs panel checked v002 is an open-source printed circuit board by intergalaktik, from the intergalaktik/ulx5m-gs repository on GitHub. It is a 6-layer board of 112 × 98 mm with 1,278 parts on 1,376 nets, routed with 29,648 tracks and 3,416 vias.
It is built around the CCGM1A1-BGA324, KSZ9031RNXCA and MPM3833CGRH-Z, with the TLV62569DBVR-TP, AT25QL321-MBUE-T and IS42VM16320E-75BLI among its other parts. Its parts include 484 capacitors, 472 resistors, 56 diodes, 44 ICs and 20 connectors.
Main components
12CCGM1A1-BGA324
FBGA-324(15x15)-40℃~+125℃ 0.9V~1.1V 1310720bit 162 20480 GateMate Supports SEU error detection and correction FBGA-324(15x15) Programmable Logic Device (CPLDs/FPGAs) ROHSCologne ChipProgrammable Logic Device (CPLDs/FPGAs)KSZ9031RNXCA
QFN-48-EP(7x7)0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHSMicrochip TechnologyEthernet TransceiversMPM3833CGRH-Z
QFN-18(2.5x3.5)-40℃~+150℃ 1 1.15MHz 1.6mm 100uF 2.5mm 2.75V~6V 3.5mm 3A 500uA 5mVp-p 600mV~6V 82% Short Circuit Protection、Over-temperature protection、Over Current Protection、Under Voltage Protection、Programmable output voltage、Power-on timing control Step-down type QFN-18(2.5x3.5) DC-DC Power Modules ROHSMonolithic Power SystemsDC-DC Power ModulesTLV62569DBVR-TP
SOT-23-51 1.5MHz 2.7V~5.5V 2A 40uA Adjustable Buck Built-in No SOT-23-5 DC-DC Converters ROHSTECH PUBLICDC-DC ConvertersAT25QL321-MBUE-T
USON-8(3x4)-40℃~+85℃ 1.7V~2V 100,000 cycles 104MHz 10uA 20 Years 32Mbit SPI USON-8(3x4) NOR FLASH ROHSRenesas ElectronicsNOR FLASHIS42VM16320E-75BLI
TFBGA-54(8x8)-40℃~+85℃ 1.7V~1.95V 133MHz 512Mbit High-speed clock synchronization、Auto precharge、Auto refresh TFBGA-54(8x8) SDRAM ROHSISSISDRAMAC0402FR-0727RL
0402-55℃~+155℃ 27Ω 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRC0402FR-0710KL
UncategorisedUnknown makerAC0402JR-07150RL
0402-55℃~+155℃ 150Ω 50V 62.5mW Thick Film Resistor ±100ppm/℃ ±5% 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountCL05A226MQ5N6J8
040222uF 6.3V X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTAC0402FR-07300RL
0402-55℃~+155℃ 300Ω 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountLTST-C190KRKT
0603-30℃~+85℃ 130° 20mA 2V 62.5mW 631nm 639nm 99mcd Discrete Diode Red Water Clear 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
README
README.mdULX5M-GS
Please check the list of confirmed working
DEFAULT VOLTAGE FOR GPIO IS SET TO 1.8V!!!
DEFAULT SDRAM PART is 1.8V
DEFAULT VCC CORE is 0.9V - if you use SerDes this needs to be higher
Most of our tests are done with VCC CORE 1.1V
We are using 3V3 on some banks
per this reasearch - https://github.com/pu-cc/gm_gpio_ringosc
ULX5M-GS v005
ULX5M with GateMate with SDRAM

ULX5M-GS V005

Promo Video ULX5M-GS <-> ULX5M-M2
V001 LED ON

ULX5M-v02 bringup
Blink LED
DVI OUT

SDRAM working with LiteX


Litex Linux with Ethernet, DVI, and USB HOST on A1

LiteX Linux resources
| Resource | Used / Available | % |
|---|---|---|
| Logic (CPE_LT) | 30 818 / 40 960 | 75 % |
| Flip-flops (CPE_FF) | 10 689 / 40 960 | 26 % |
| RAM I/O (CPE_RAMIO) | 2 988 / 40 960 | 7 % |
| Block RAM (RAM_HALF) | 50 / 64 | 78 % |
| PLL | 3 / 4 | 75 % |
| GPIO / IOSEL | 73 / 162 | 45 % |
| Global clock nets | 4 / 4 | 100 % |
| SerDes | 0 / 1 | 0 % |
VGA over GPIO
While testing LVDS I wanted to check if we can have VGA over GPIO and it looks OK

For now only possible over VGA



-
Power regulators
-
GateMate
- compatibility to A1 and A2
- ext. clock: 100 MHz lvds (can be used for both serdes and pll)
- ext. clock: 25MHz
- programmer interface
- usb-c connector
- select between flash and jtag config (DIP switch)
-
Gigabit Ethernet
- KSZ9031RNXCA
-
SDRAM 1V8/2.5V/3.3V selectable in production - default version is 1.8V
-
Interfaces
- 8 LEDs ( 8 )
- 3 BTNs ( 3 )
- SD Card (4 data lines)
- RPi 26 GPIO + 2 I2C GPIOs ( 12 diff pairs + 2 routed no diff )
- DDMI0 ( 3 diff data lines + diff clock )
- LVDS0 ( 4 diff data lines + diff clock )
- LVDS1 ( 3 diff data lines + diff clock )
- USB-C ( 1 diff data line + USBID )
- PCIe ( 2 diff data lines + diff clock )
- SDRAM
- Gigabit Ethernet
- FLASH
-
Tested and confirmed working from V004
-
LEDs
-
BTNs
-
Video output ( DVI )
-
GPIO output
-
USB-C TinyDFU USB Bootloader
-
Serial Over GPIO
-
VGA Over GPIO
-
JTAG
-
LVDS - rapicam*
-
DIP SW - they work as FLASH BOOT SELECT
-
FLASH - I can put bitstream in flash and boot from flash
-
SDRAM - tested and working with LiteX
-
SD - tested and working with LiteX
-
DVI - tested and works
-
Ethernet - confirmed on v004 - v005 is not tested
-
PCIe (SerDes) - internal test works - externaly not tested
- SerDes is confirmed working with our ULX5M-M2 v0.1 but for now only 1.25Gbit/s
*LVDS I can get cam stream not to trow any error but without and output if I add output cam trows errors - there are some timming issues in the core...
References
https://github.com/OLIMEX/GateMateA1-EVB
https://github.com/intergalaktik/Extension_Boards_for_Olimex_GateMate
https://github.com/YosysHQ/prjpeppercorn-test-cases
https://github.com/YosysHQ/prjpeppercorn
https://github.com/chili-chips-ba/openCologne
https://www.chili-chips.xyz/open-cologne
Acknowledgements
This project was done in collaboration with Chili Chips*Ba team. They have put enormes effort in making all cores to work on GateMate even before we have our own board! Thanks to them now we have big set of cores that can be used to check and improve opensource toolchain! They are proven to be reliable partners that solves problem quickly and on side works on educating younger generations!
Also big thanks goes to YosysHQ as they are doing miracles with open source tooling, and we now finaly have one that works for GateMate!
From YosysHQ special thanks to Micko and Lofty that are helping in real time on Discord!
Special thanks to Patrick from Cologne, as without him and rest of Cologne team we would not be able to get this project done.
Work on this board is financed by NLnet foundation

https://nlnet.nl/project/openCologne/
This project was funded through the NGI0 Entrust Fund, a fund established by NLnet with financial support from the European Commission's Next Generation Internet programme, under the aegis of DG Communications Networks, Content and Technology under grant agreement No 101069594.
Check up our blogposts
Comming soon!!!
Contact us
Discord: https://discord.gg/qwMUk6W
Parts
1,278| Qty | Value | Footprint | References |
|---|---|---|---|
| 184 | 100n | Capacitor_SMD:C_0402_1005Metric | C102, C102, C102, C102, C103, C103, C103, C103, C106, C106, C106, C106, C107, C107, C107, C107 +168 |
| 80 | 27R | Resistor_SMD:R_0402_1005Metric | R100, R100, R100, R100, R101, R101, R101, R101, R102, R102, R102, R102, R104, R104, R104, R104 +64 |
| 68 | 2u2 | Capacitor_SMD:C_0402_1005Metric | C13, C13, C13, C13, C100, C100, C100, C100, C122, C122, C122, C122, C123, C123, C123, C123 +52 |
| 68 | 4k7 | Resistor_SMD:R_0402_1005Metric | R33, R33, R33, R33, R34, R34, R34, R34, R35, R35, R35, R35, R36, R36, R36, R36 +52 |
| 56 | 10n | Capacitor_SMD:C_0402_1005Metric | C110, C110, C110, C110, C111, C111, C111, C111, C113, C113, C113, C113, C119, C119, C119, C119 +40 |
| 56 | 220n | Capacitor_SMD:C_0402_1005Metric | C33, C33, C33, C33, C59, C59, C59, C59, C120, C120, C120, C120, C121, C121, C121, C121 +40 |
| 40 | 10k | Resistor_SMD:R_0402_1005Metric | R111, R111, R111, R111, R128, R128, R128, R128, R134, R134, R134, R134, R138, R138, R138, R138 +24 |
| 36 | 150R | Resistor_SMD:R_0402_1005Metric | R129, R129, R129, R129, R130, R130, R130, R130, R131, R131, R131, R131, R132, R132, R132, R132 +20 |
| 36 | 22u | Capacitor_SMD:C_0402_1005Metric | C39, C39, C39, C39, C43, C43, C43, C43, C124, C124, C124, C124, C125, C125, C125, C125 +20 |
| 36 | 300R | Resistor_SMD:R_0402_1005Metric | R59, R59, R59, R59, R63, R63, R63, R63, R64, R64, R64, R64, R118, R118, R118, R118 +20 |
| 32 | LED | LED_SMD:LED_0603_1608Metric | D10, D10, D10, D10, D11, D11, D11, D11, D12, D12, D12, D12, D13, D13, D13, D13 +16 |
| 28 | 10u | Capacitor_SMD:C_0402_1005Metric | C104, C104, C104, C104, C105, C105, C105, C105, C109, C109, C109, C109, C114, C114, C114, C114 +12 |
| 28 | 200R | Resistor_SMD:R_0402_1005Metric | R109, R109, R109, R109, R147, R147, R147, R147, R148, R148, R148, R148, R149, R149, R149, R149 +12 |
| 28 | dnp | Resistor_SMD:R_0402_1005Metric | R107, R107, R107, R107, R108, R108, R108, R108, R110, R110, R110, R110, R112, R112, R112, R112 +12 |
| 24 | 1k | Resistor_SMD:R_0402_1005Metric | R46, R46, R46, R46, R144, R144, R144, R144, R145, R145, R145, R145, R146, R146, R146, R146 +8 |
| 20 | 0R | Resistor_SMD:R_0402_1005Metric | R7, R7, R7, R7, R116, R116, R116, R116, R141, R141, R141, R141, R142, R142, R142, R142 +4 |
| 16 | 0R/0603 | Resistor_SMD:R_0603_1608Metric | R10, R10, R10, R10, R11, R11, R11, R11, R13, R13, R13, R13, R21, R21, R21, R21 |
| 16 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R1, R1, R1, R4, R4, R4, R4, R5, R5, R5, R5, R143, R143, R143, R143 |
| 16 | 1N914 | Diode_SMD:D_SOD-523 | D5, D5, D5, D5, D6, D6, D6, D6, D7, D7, D7, D7, D8, D8, D8, D8 |
| 16 | 22nF | Capacitor_SMD:C_0402_1005Metric | C99, C99, C99, C99, C101, C101, C101, C101, C140, C140, C140, C140, C141, C141, C141, C141 |
| 16 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C2, C2, C2, C2, C3, C3, C3, C3, C11, C11, C11, C11, C115, C115, C115, C115 |
| 16 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID1, FID1, FID1, FID2, FID2, FID2, FID2, FID3, FID3, FID3, FID3, FID4, FID4, FID4, FID4 |
| 16 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H1, H1, H1, H2, H2, H2, H2, H3, H3, H3, H3, H4, H4, H4, H4 |
| 12 | 12k1 | Resistor_SMD:R_0402_1005Metric | R47, R47, R47, R47, R55, R55, R55, R55, R103, R103, R103, R103 |
| 12 | 1R | Resistor_SMD:R_0603_1608Metric | R23, R23, R23, R23, R105, R105, R105, R105, R106, R106, R106, R106 |
| 12 | 1u | Capacitor_SMD:C_0402_1005Metric | C8, C8, C8, C8, C9, C9, C9, C9, C29, C29, C29, C29 |
| 12 | 200k | Resistor_SMD:R_0402_1005Metric | R3, R3, R3, R3, R17, R17, R17, R17, R18, R18, R18, R18 |
| 12 | 4R7 | Resistor_SMD:R_0402_1005Metric | R121, R121, R121, R121, R122, R122, R122, R122, R123, R123, R123, R123 |
| 12 | BLM18PG121SN1D | Inductor_SMD:L_0603_1608Metric | FB1, FB1, FB1, FB1, FB2, FB2, FB2, FB2, FB3, FB3, FB3, FB3 |
| 12 | DFE322512F-2R2M=P2 | Inductor_SMD:L_1008_2520Metric | L1, L1, L1, L1, L2, L2, L2, L2, L3, L3, L3, L3 |
| 12 | GND | TestPoint:TestPoint_Pad_D1.0mm | TP7, TP7, TP7, TP7, TP9, TP9, TP9, TP9, TP11, TP11, TP11, TP11 |
| 12 | SW_Push | Switch_EVPAA:Switch_EVPAA | BTN1, BTN1, BTN1, BTN1, BTN2, BTN2, BTN2, BTN2, BTN3, BTN3, BTN3, BTN3 |
| 12 | TLV62569DBV | Package_TO_SOT_SMD:SOT-23-5 | U1, U1, U1, U1, U2, U2, U2, U2, U5, U5, U5, U5 |
| 8 | 22u/0805 | Capacitor_SMD:C_0805_2012Metric | C1, C1, C1, C1, C10, C10, C10, C10 |
| 8 | 3.6V | Diode_SMD:D_SOD-523 | D3, D3, D3, D3, D4, D4, D4, D4 |
| 8 | 5k1 | Resistor_SMD:R_0402_1005Metric | R61, R61, R61, R61, R62, R62, R62, R62 |
| 8 | 74LVC2G00HK3-7 | 74LVC2G00HK3-7:74LVC2G00HK37 | U7, U7, U7, U7, U8, U8, U8, U8 |
| 8 | BSS138 | Package_TO_SOT_SMD:SOT-523 | Q1, Q1, Q1, Q1, Q2, Q2, Q2, Q2 |
| 8 | DF40C-100DP-0.4V_51_ | ulx5m-gs:HRS_DF40C-100DP-0.4V_51_ | J1, J1, J1, J1, J2, J2, J2, J2 |
| 6 | Fiducial | Fiducial | KiKit_FID_B_1, KiKit_FID_B_2, KiKit_FID_B_3, KiKit_FID_T_1, KiKit_FID_T_2, KiKit_FID_T_3 |
| 4 | 120k | Resistor_SMD:R_0402_1005Metric | R14, R14, R14, R14 |
| 4 | 1V2 | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP4, TP4, TP4 |
| 4 | 1V8 | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP1, TP1, TP1 |
| 4 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C85, C85, C85, C85 |
| 4 | 20k | Resistor_SMD:R_0402_1005Metric | R15, R15, R15, R15 |
| 4 | 22k | Resistor_SMD:R_0402_1005Metric | R6, R6, R6, R6 |
| 4 | 3V3 | TestPoint:TestPoint_Pad_D1.0mm | TP2, TP2, TP2, TP2 |
| 4 | 40.2k | Resistor_SMD:R_0402_1005Metric | R12, R12, R12, R12 |
| 4 | 511FCA100M000BAG | Oscillator:Oscillator_SMD_SiTime_PQFD-6L_3.2x2.5mm | X2, X2, X2, X2 |
| 4 | 51k | Resistor_SMD:R_0402_1005Metric | R2, R2, R2, R2 |
| 4 | 60k | Resistor_SMD:R_0402_1005Metric | R16, R16, R16, R16 |
| 4 | 74LVC1G04GM,115 | 74LVC1G04GM,115:PESD3V3L5UF115 | U6, U6, U6, U6 |
| 4 | ASE2-25.000MHZ-L-C-T | Crystal:Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | Y1, Y1, Y1, Y1 |
| 4 | AT25QL321-MBUE-T | ulx5m-gs:SON80P400X300X60-10N | U9, U9, U9, U9 |
| 4 | CVS-02TB | Button_Switch_SMD:SW_DIP_SPSTx02_Slide_Copal_CVS-02xB_W5.9mm_P1mm | SW1, SW1, SW1, SW1 |
| 4 | ECS-2520MV-250-xx | Oscillator:Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | X1, X1, X1, X1 |
| 4 | G*** | kibuzzard-686AA8CB | kibuzzard-686AA8CB, kibuzzard-686AA8CB, kibuzzard-686AA8CB, kibuzzard-686AA8CB |
| 4 | G*** | kibuzzard-686AA7AF | kibuzzard-686AA7AF, kibuzzard-686AA7AF, kibuzzard-686AA7AF, kibuzzard-686AA7AF |
| 4 | G*** | kibuzzard-6A4FB7A0 | kibuzzard-6A4FB7A0, kibuzzard-6A4FB7A0, kibuzzard-6A4FB7A0, kibuzzard-6A4FB7A0 |
| 4 | G*** | kibuzzard-686CE423 | kibuzzard-686CE423, kibuzzard-686CE423, kibuzzard-686CE423, kibuzzard-686CE423 |
| 4 | G*** | kibuzzard-686AA726 | kibuzzard-686AA726, kibuzzard-686AA726, kibuzzard-686AA726, kibuzzard-686AA726 |
| 4 | G*** | kibuzzard-689F41CF | kibuzzard-689F41CF, kibuzzard-689F41CF, kibuzzard-689F41CF, kibuzzard-689F41CF |
| 4 | GateMate-CCGM1A1 | ulx5m-gs:BGA-324_15.0x15.0mm_Layout18x18_P0.8mm_Ball0.45mm_Pad0.4mm_NSMD | U4, U4, U4, U4 |
| 4 | IS42VM16320E-75BLI | IS42S16320D:IS42S16320D-6BLI | U10, U10, U10, U10 |
| 4 | JTAG | Connector_PinHeader_1.00mm:PinHeader_2x03_P1.00mm_Vertical_SMD | J4, J4, J4, J4 |
| 4 | KSZ9031RNXCA | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U14, U14, U14, U14 |
| 4 | LOGO | nlnet:nlnet | G***, G***, G***, G*** |
| 4 | LOGO | intergalaktik:intergalaktik | G***, G***, G***, G*** |
| 4 | LOGO | kicad:kicad2_5mm | G***, G***, G***, G*** |
| 4 | MPM3833CGRH-Z | ulx5m-gs:MPM3833CGRH-Z | U3, U3, U3, U3 |
| 4 | MountingHole | OpenCologne:open_cologne_small | LoGo_opencologne, LoGo_opencologne, LoGo_opencologne, LoGo_opencologne |
| 4 | NPTH | NPTH | KiKit_TO_1, KiKit_TO_2, KiKit_TO_3, KiKit_TO_4 |
| 4 | POR_EN | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP1, JP1, JP1 |
| 4 | SPI_FWD | TestPoint:TestPoint_Pad_1.0x1.0mm | TP12, TP12, TP12, TP12 |
| 4 | USB_C_Receptacle | ulx5m-gs:USB-C_16 | J5, J5, J5, J5 |
| 4 | VDD_PLL | TestPoint:TestPoint_Pad_D1.0mm | TP6, TP6, TP6, TP6 |
| 4 | VDD_SER | TestPoint:TestPoint_Pad_D1.0mm | TP10, TP10, TP10, TP10 |
| 4 | VDD_SER_PLL | TestPoint:TestPoint_Pad_D1.0mm | TP8, TP8, TP8, TP8 |
| 4 | Vcore | TestPoint:TestPoint_Pad_D1.0mm | TP3, TP3, TP3, TP3 |
| 4 | Vcore_sel | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | J3, J3, J3, J3 |
The 1,266 most common of 1,278 parts.
More from intergalaktik/ulx5m-gs
1- 6 layers55 × 40 mm

Similar boards
- 4 layers80 × 60 mm

Bytebeam ble can
Atif6894/automotive-ble-can-pcb
A small 4-layer board that sits on a vehicle's 12/24 V harness, talks CAN FD through a TCAN4550-Q1, and exposes it over Bluetooth LE through a CC2340R5-Q1.
153 parts - 4 layers50 × 30 mm

Picothermal hardware
icamaster/picothermal
Thermal camera based on Flir Lepton with RP2040 and USB-C
121 parts72MIT - 8 layers24 × 27.3 mm

- 4 layers160 × 90 mm

- 6 layers100 × 60 mm

- 4 layers48 × 44.5 mm

Smol servo rpi2350-tmc6200
dognotdog/smol_servo
circuitry and software for controlling NEMA17 size brushless motors and stepper motors as servos.
151 parts5 - 6 layers50 × 50 mm

- 4 layers60 × 60 mm

Stillpoint
techmiguel/stillpoint
Open-hardware 60 GHz radar ceiling sensor: presence & fall detection without a camera. Matter over Thread, KiCad 4-layer Ø60 mm board.
95 parts1CERN-OHL-S-2.0
Questions
How big is the Ulx5m gs panel checked v002 PCB?
It measures 112 × 98 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Ulx5m gs panel checked v002 use?
1,278 parts, built around the CCGM1A1-BGA324, KSZ9031RNXCA, MPM3833CGRH-Z and TLV62569DBVR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ulx5m gs panel checked v002 KiCad files?
From the intergalaktik/ulx5m-gs repository on GitHub, at the commit this page was made from: the board is hardware/panel/ulx5m-gs_panel_checked_v002.kicad_pcb and its schematic hardware/cm4-gpio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ulx5m gs panel checked v002 design in my own project?
Its repository states no licence, so its author keeps all rights: ask intergalaktik before reusing the design.

