4 layers87 × 59.8 mm
8 layers154 × 125 mm
Sniffer
azonenberg/sata-sniffer16SATA sniffing
- Size
- 154 × 125 mm
- Copper layers
- 8
- Thickness
- 1.6 mm
- Parts
- 328
- Nets
- 380
- Pads
- 1,831
- Tracks, vias
- 44,716, 2,384
- Pours
- 52
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 9 Nov 2021
- Updated
- 28 Jul 2022
Overview
Sniffer is an open-source printed circuit board by azonenberg, from the azonenberg/sata-sniffer repository on GitHub. It is an 8-layer board of 154 × 125 mm with 328 parts on 380 nets, routed with 44,716 tracks and 2,384 vias.
It is built around the KSZ9031RNXCA, MYTNA1R84RELA2RA and W25Q128JVSIQ, with the 74AVCH1T45W6, SIT9121AI-2BF-XXS200.000000G and ECS-2016MVQ-250-CN-TR among its other parts. Its parts include 162 capacitors, 73 resistors, 18 ICs, 14 connectors and 6 inductors.
Main components
12
KSZ9031RNXCA
QFN-48-EP(7x7)0℃~+70℃ 1.2V、1.8V、2.5V、3.3V 10BASE-T、100BASE-TX、1000BASE-T 10Mbit/s、100Mbit/s、1Gbit/s 4 PHY Transceiver RGMII QFN-48-EP(7x7) Ethernet Transceivers ROHSMicrochip TechnologyEthernet TransceiversMYTNA1R84RELA2RA
LGA-48(10.5x9)LGA-48(10.5x9) DC-DC Power Modules ROHSMurataAC-DC Power Modules
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
74AVCH1T45W6
SOT-26-40℃~+85℃ 1 1 1.2V~3.6V 1.2V~3.6V Bidirectional Decoupling、Power-Off Protection Tri-State SOT-26 Translators, Level Shifters ROHSDiodes Incorporated74 Series
SIT9121AI-2BF-XXS200.000000G
SMD3225-6P-40℃~+85℃ 2.5V~3.3V 200MHz 55mA LVDS ±10ppm SMD3225-6P Programmable Oscillators ROHSSiTimeProgrammable Oscillators
ECS-2016MVQ-250-CN-TR
SMD2016-4P-40℃~+85℃ 1.71V~3.63V 25MHz 7mA HCMOS SMD2016-4P Crystal Oscillators ROHSECSCrystal OscillatorsECX2-LMV-3CN-125.000-TR
SMD3225-6PSMD3225-6P Crystal Oscillators ROHSECSCrystal OscillatorsECX2-LMV-7CN-156.250-TR
SMD7050-6PCrystal OscillatorsECS
LP2996AMR
SO-8SO-8 Power Management - Specialized ROHSTexas InstrumentsPower Management - Specialized32K243-40ML5
-- Coaxial Connectors (RF) ROHSRosenbergerCoaxial Connectors (RF)
MI0603J601R-10
06031 1A 200mΩ 600Ω@100MHz 0603 Ferrite Beads ROHSLairdFerrite Beads
NRS5030T2R2NMGJ
SMD,4.9x4.9mm2.2uH 23mΩ 3.5A 4.2A ±30% SMD,4.9x4.9mm Power Inductors ROHSTaiyo YudenPower Inductors
Parts
328| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C1, C12, C13, C14, C15, C18, C19, C127, C133, C154, C155, C156, C157, C158, C159, C162 +36 |
| 32 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C4, C11, C16, C17, C22, C27, C38, C39, C52, C55, C131, C140, C141, C142, C153, C161 +16 |
| 31 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C34, C35, C102, C103, C126, C130, C145, C146, C147, C148, C149, C150, C151, C152, C163, C164 +15 |
| 15 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R27, R37, R38, R39, R40, R41, R42, R43, R49, R59, R60, R62, R63, R69, R70 |
| 12 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R13, R15, R18, R19, R20, R21, R22, R23, R24, R26, R30, R31 |
| 12 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17 |
| 9 | 10 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C106, C110, C114, C116, C118, C119, C122, C123, C124 |
| 7 | 4.7K | azonenberg_pcb:EIA_0402_RES_NOSILK | R28, R29, R45, R46, R47, R48, R64 |
| 7 | 47 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C47, C48, C50, C107, C108, C111, C125 |
| 7 | 470 | azonenberg_pcb:EIA_0402_RES_NOSILK | R32, R33, R34, R71, R72, R73, R74 |
| 6 | 47 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C134, C135, C136, C137, C138, C139 |
| 6 | TESTTRACE | azonenberg_pcb:TESTPOINT_BARETRACE_150UM | TP18, TP19, TP20, TP21, TP22, TP23 |
| 6 | VAL** | azonenberg_pcb:FIDUCIAL_1MM | FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM, FIDUCIAL_1MM |
| 5 | 100 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C3, C10, C49, C51, C54 |
| 5 | GREEN | azonenberg_pcb:EIA_0402_LED | D1, D2, D3, D4, D5 |
| 5 | TESTPOINT | azonenberg_pcb:TESTPOINT_SMT_0.5MM | TP1, TP2, TP3, TP4, TP5 |
| 4 | 100 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C113, C115, C129, C132 |
| 4 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R14, R35, R36, R44 |
| 4 | 32K243-40ML5 | azonenberg_pcb:CONN_SMA_EDGE_ROSENBERGER_32K243_40ML5 | J2, J5, J6, J7 |
| 4 | 74AVCH1T45 | azonenberg_pcb:DFN_6_0.5MM_1.45x1.00MM | U11, U12, U13, U14 |
| 4 | BLM31KN271SH1L | azonenberg_pcb:EIA_1206_CAP_NOSILK | FB1, FB5, FB6, FB7 |
| 4 | SCREW_HOLE | azonenberg_pcb:MECHANICAL_CLEARANCEHOLE_4_40 | M1, M2, M3, M4 |
| 4 | TESTCLIP | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | TP24, TP25, TP26, TP27 |
| 3 | 100 | azonenberg_pcb:EIA_0402_RES_NOSILK | R16, R65, R75 |
| 3 | 1M | azonenberg_pcb:EIA_0402_RES_NOSILK | R17, R55, R57 |
| 3 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB2, FB3, FB4 |
| 3 | NRS5030T2R2NMGJ | azonenberg_pcb:INDUCTOR_YUDEN_NRS5030 | L2, L3, L4 |
| 2 | 0 | azonenberg_pcb:EIA_0402_RES_NOSILK | R61, R66 |
| 2 | 0.5 | azonenberg_pcb:EIA_0402_RES_NOSILK | R51, R52 |
| 2 | 100K | azonenberg_pcb:EIA_0402_RES_NOSILK | R53, R54 |
| 2 | 22 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C2, C117 |
| 2 | 22 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C100, C101 |
| 2 | 22 uF 25V | azonenberg_pcb:EIA_1812_CAP_NOSILK | C104, C105 |
| 2 | 4.7 uH | azonenberg_pcb:EIA_0805_INDUCTOR_NOSILK | L5, L6 |
| 2 | 47 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C53, C128 |
| 2 | 470 uF | azonenberg_pcb:CAP_AL_10MM_SMT | C109, C112 |
| 2 | 649K | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R8 |
| 2 | 93.1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R56, R58 |
| 2 | CONN_SFF8087 | azonenberg_pcb:CONN_SFF8087_MOLEX_75783-0140 | J8, J9 |
| 2 | DNP | azonenberg_pcb:EIA_0603_CAP_NOSILK | C21, C26 |
| 2 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R11, R12 |
| 2 | FPF2498 | azonenberg_pcb:BGA_6_1.3x1.0_0.4MM | U16, U17 |
| 2 | SIT9121AI-2BF-XXS200.000000G | azonenberg_pcb:OSCILLATOR_LVDS_3.2x2.5 | U7, U19 |
| 1 | 0.1 | azonenberg_pcb:EIA_0402_RES_NOSILK | R50 |
| 1 | 1.02M | azonenberg_pcb:EIA_0402_RES_NOSILK | R9 |
| 1 | 1.33K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1 |
| 1 | 1.78K | azonenberg_pcb:EIA_0402_RES_NOSILK | R4 |
| 1 | 12.1K 1% | azonenberg_pcb:EIA_0402_RES_NOSILK | R25 |
| 1 | 22 uF | azonenberg_pcb:EIA_1812_CAP_NOSILK | C121 |
| 1 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C120 |
| 1 | 232K | azonenberg_pcb:EIA_0402_RES_NOSILK | R5 |
| 1 | 2A | azonenberg_pcb:EIA_0603_CAP_NOSILK | F1 |
| 1 | 324K | azonenberg_pcb:EIA_0402_RES_NOSILK | R10 |
| 1 | 330 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C46 |
| 1 | 442K | azonenberg_pcb:EIA_0402_RES_NOSILK | R2 |
| 1 | 464K | azonenberg_pcb:EIA_0402_RES_NOSILK | R6 |
| 1 | 806K | azonenberg_pcb:EIA_0402_RES_NOSILK | R7 |
| 1 | BARREL | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J1 |
| 1 | BEL_FUSE_0826-1G1T-23-F | azonenberg_pcb:CONN_BELFUSE_0826_1G1T_23_F | J3 |
| 1 | CONN_LVDS_EXPANSION_HOST | azonenberg_pcb:CONN_SAMTEC_QTH-030-01-L-D-A | J15 |
| 1 | CONN_SATA_DEVICE | azonenberg_pcb:CONN_SATA_MOLEX_0674901220 | J13 |
| 1 | CONN_SATA_HOST | azonenberg_pcb:CONN_SATA_MOLEX_0674901220 | J14 |
| 1 | CONN_SFP_HOST | azonenberg_pcb:CONN_SFP+_AMPHENOL_UE76_A10_2000T | J10 |
| 1 | DDR3_SODIMM | azonenberg_pcb:CONN_SODIMM_DDR3_TE_2013289-1 | U4 |
| 1 | DNP | azonenberg_pcb:EIA_1210_CAP_NOSILK | C160 |
| 1 | ECS-2016MVQ-250-CN | azonenberg_pcb:OSCILLATOR_2.0x1.6 | U9 |
| 1 | ECX2-LMV-3CN-125.000-TR | azonenberg_pcb:OSCILLATOR_LVDS_3.2x2.5 | U8 |
| 1 | ECX2-LMV-7CN-156.250-TR | azonenberg_pcb:OSCILLATOR_LVDS_7.0x5.0 | U6 |
| 1 | KSZ9031RN | azonenberg_pcb:QFN_48_0.5MM_7x7MM | U10 |
| 1 | LOGO | w_logo:Logo_silk_polarity_center_5x1.4mm | G*** |
| 1 | LOGO | azonenberg_pcb:LONGTHING-1200DPI | G*** |
| 1 | LP2996A | azonenberg_pcb:SOIC_8_3.9MM_EPAD | U18 |
| 1 | LTC3374-QFN | azonenberg_pcb:QFN_38_0.5MM_5x7MM | U2 |
| 1 | MYTNA1R84RELA2RA | azonenberg_pcb:MODULE_MURATA_MYTNA1R84RELA2RA | U3 |
| 1 | NS10145T2R2NNA | azonenberg_pcb:INDUCTOR_YUDEN_LSRN_10145 | L1 |
| 1 | OKL-T_3-W12P-C | azonenberg_pcb:MODULE_MURATA_OKL-T3-W12 | U1 |
| 1 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J12 |
| 1 | SFP_CAGE | azonenberg_pcb:CONN_SFP_CAGE_TE_2007194-1 | J11 |
| 1 | SSM6N58NU | azonenberg_pcb:DFN_6_0.65MM_2x2MM_GDS | Q1 |
| 1 | W25Q128JV | azonenberg_pcb:DFN_8_1.27MM_6x5MM | U15 |
The 326 most common of 328 parts.
Similar boards
- 10 layers130 × 90 mm
- 10 layers151 × 111 mm
Switch engine
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
369 parts36BSD-3-Clause - 4 layers100.5 × 62.5 mm
Baset1-media converter
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
180 parts17BSD-3-Clause - 4 layers56 × 64 mm
- 10 layers165 × 121 mm
Triggercrossbar
azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling
633 parts8BSD-3-Clause - 4 layers100 × 70 mm
Mp2-xc7k test
azonenberg/stm32mp2-baremetal-tests
Experimenting with bare metal STM32MP2 development
351 parts4BSD-3-Clause - 8 layers126 × 117 mm
Questions
How big is the Sniffer PCB?
It measures 154 × 125 mm and has 8 copper layers, 1.6 mm thick.
What parts does the Sniffer use?
328 parts, built around the KSZ9031RNXCA, MYTNA1R84RELA2RA, W25Q128JVSIQ and 74AVCH1T45W6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sniffer KiCad files?
From the azonenberg/sata-sniffer repository on GitHub, at the commit this page was made from: the board is board/sniffer.kicad_pcb and its schematic mcu-pmod/mcu-pmod.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sniffer design in my own project?
Its repository states no licence, so its author keeps all rights: ask azonenberg before reusing the design.