

Mp2-xc7k test
Experimenting with bare metal STM32MP2 development
- Size
- 100 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 351
- Nets
- 931
- Pads
- 2,196
- Tracks, vias
- 4,427, 1,255
- Pours
- 68
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Nov 2025
- Updated
- 28 Dec 2025
Overview
Mp2-xc7k test is an open-source printed circuit board by azonenberg, from the azonenberg/stm32mp2-baremetal-tests repository on GitHub, published under the BSD-3-Clause licence. It is a 4-layer board of 100 × 70 mm with 351 parts on 931 nets, routed with 4,427 tracks and 1,255 vias.
It is built around the STM32MP257FAI3, XC7K160T-1FFG676C and S25FL128SAGBHIA10, with the NCP45525IMNTWG-H, ECS-1612MV-250-CN-TR and AT24MAC402-XHM among its other parts. Its parts include 151 capacitors, 104 resistors, 20 ICs, 18 diodes and 11 connectors. It belongs with the STM32 and FPGA and CPLD boards of this library.
Main components
11STM32MP257FAI3
TFBGA-436-40℃~+125℃ 1.8V、3.3V 12bit 172 32 Bit 400MHz、1.5GHz 808KB ARM Cortex-M33、ARM Cortex-A35 Built-in+External Power-on reset (POR)、Power-down reset (PDR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Software reset、External pin reset (NRST)、Programmable watchdog、Independent watchdog (IWDG)、Window watchdog (WWDG) TFBGA-436 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)XC7K160T-1FFG676C
FCBGA-6760℃~+85℃ 162240 Integrated temperature sensor、Supports SEU error detection and correction、Supports AES encryption FCBGA-676 Programmable Logic Device (CPLDs/FPGAs) ROHSAMD/XILINXProgrammable Logic Device (CPLDs/FPGAs)S25FL128SAGBHIA10
BGA-24(8x6)-40℃~+85℃ 100,000 cycles 128Mbit 133MHz 2.7V~3.6V 20 Years 250us 70uA Power-on reset、Hardware Write Protection、Software Write Protection、ECC error correction、Write enable latch、Absolute Write Protection SPI TBGA-24 NOR FLASH ROHSInfineon TechnologiesNOR FLASHNCP45525IMNTWG-H
DFN-8-EP(2x2)-40℃~+85℃ 3V~5.5V DFN-8-EP(2x2) Charge Pumps ROHSonsemiAC-DC Controllers And RegulatorsECS-1612MV-250-CN-TR
SMD1612-4P-40℃~+85℃ 1.6V~3.63V 25MHz 5mA CMOS ±25ppm SMD1612-4P Crystal Oscillators ROHSECSCrystal OscillatorsAT24MAC402-XHM
TSSOP81.7V to 5.5V, I2C-Compatible (2-wire) 2-Kbit (256 x 8) Serial EEPROM with a EUI-48 AddressMicrochip TechnologyUncategorisedS27KL0642GABHB020
FBGA-24_8X6FBGA-24_8X6 New Arrivals ROHSInfineon TechnologiesUncategorisedSIT9121AI-2BF-XXS156.250000G
SMD3225-6P-40℃~+85℃ 156.25MHz 2.5V~3.3V 55mA LVDS ±10ppm SMD3225-6P Programmable Oscillators ROHSSiTimeProgrammable OscillatorsSIT9121AI-2BF-XXS200.000000G
SMD3225-6P-40℃~+85℃ 2.5V~3.3V 200MHz 55mA LVDS ±10ppm SMD3225-6P Programmable Oscillators ROHSSiTimeProgrammable OscillatorsTCA6424ARGJ
QFN32Low-Voltage 24-Bit I2C and SMBus I/O Expander with Interrupt Output, Reset, and Configuration RegistersTexas InstrumentsUncategorisedMI0603J601R-10
06031 1A 200mΩ 600Ω@100MHz 0603 Ferrite Beads ROHSLairdFerrite Beads
Parts
351| Qty | Value | Footprint | References |
|---|---|---|---|
| 55 | 1 uF | azonenberg_pcb:EIA_0201_CAP_NOSILK | C100, C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C118 +39 |
| 35 | 33 | azonenberg_pcb:EIA_0402_RES_NOSILK | R2, R10, R30, R31, R32, R33, R34, R36, R37, R39, R43, R60, R126, R127, R128, R129 +19 |
| 34 | 0.47 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C10, C17, C115, C116, C126, C127, C130, C131, C132, C135, C137, C138, C139, C141, C142, C143 +18 |
| 18 | 10K | azonenberg_pcb:EIA_0402_RES_NOSILK | R1, R7, R14, R23, R24, R25, R26, R27, R38, R41, R42, R47, R53, R64, R65, R66 +2 |
| 16 | 33K | azonenberg_pcb:EIA_0402_RES_NOSILK | R9, R44, R54, R55, R56, R57, R78, R79, R80, R81, R157, R158, R159, R160, R163, R164 |
| 16 | 4.7 uF | azonenberg_pcb:EIA_0603_CAP_NOSILK | C3, C13, C14, C18, C19, C41, C57, C58, C59, C64, C65, C66, C117, C123, C125, C136 |
| 16 | GREEN | azonenberg_pcb:EIA_0402_LED | D1, D2, D4, D5, D6, D7, D8, D9, D10, D11, D31, D32, D33, D34, D39, D40 |
| 12 | U.FL | azonenberg_pcb:CONN_U.FL_TE_1909763-1 | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP11, TP12, TP13 |
| 11 | 0.1 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C4, C50, C51, C52, C53, C54, C67, C76, C77, C133, C134 |
| 9 | 4.7K | azonenberg_pcb:EIA_0402_RES_NOSILK | R4, R5, R11, R51, R52, R58, R59, R85, R165 |
| 6 | 22 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C12, C16, C21, C24, C38, C129 |
| 6 | FIDUCIAL | azonenberg_pcb:FIDUCIAL_1MM | FID1, FID2, FID3, FID4, FID5, FID6 |
| 5 | 10 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C1, C31, C32, C35, C96 |
| 5 | DNP | azonenberg_pcb:EIA_0402_CAP_NOSILK | C11, C15, C20, C28, C124 |
| 5 | NCP45525IMNTWG-H | azonenberg_pcb:DFN_8_0.5MM_2x2MM | U3, U7, U9, U14, U19 |
| 4 | 0.22 uF | azonenberg_pcb:EIA_0402_CAP_NOSILK | C44, C45, C46, C47 |
| 4 | 1K | azonenberg_pcb:EIA_0402_RES_NOSILK | R45, R124, R161, R162 |
| 4 | 2.2 uH | azonenberg_pcb:EIA_1210_CAP_NOSILK | L2, L3, L4, L5 |
| 4 | 47 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C60, C61, C62, C63 |
| 4 | SCREWHOLE | azonenberg_pcb:MECHANICAL_CLEARANCEHOLE_4_40 | M2, M3, M4, M10 |
| 3 | 0 | azonenberg_pcb:EIA_0402_RES_NOSILK | R3, R28, R29 |
| 3 | 100 | azonenberg_pcb:EIA_0402_RES_NOSILK | R35, R90, R91 |
| 3 | 22 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C33, C36, C95 |
| 3 | 47 uF | azonenberg_pcb:EIA_1206_CAP_NOSILK | C25, C26, C39 |
| 3 | DNP | azonenberg_pcb:EIA_0402_RES_NOSILK | R6, R40, R83 |
| 3 | GROUND | azonenberg_pcb:TESTPOINT_BARETRACE_328UM | TP16, TP17, TP18 |
| 3 | MI0603J601R-10 | azonenberg_pcb:EIA_0603_INDUCTOR_NOSILK | FB1, FB7, FB8 |
| 2 | 0.5 | azonenberg_pcb:EIA_0402_RES_NOSILK | R49, R50 |
| 2 | 1.02M | azonenberg_pcb:EIA_0402_RES_NOSILK | R16, R18 |
| 2 | 22 uF | azonenberg_pcb:EIA_0805_CAP_NOSILK | C48, C55 |
| 2 | 24.9K | azonenberg_pcb:EIA_0402_RES_NOSILK | R19, R21 |
| 2 | 255K | azonenberg_pcb:EIA_0402_RES_NOSILK | R15, R17 |
| 2 | 330 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C43, C49 |
| 2 | 4.7 uH | azonenberg_pcb:EIA_0805_INDUCTOR_NOSILK | L6, L7 |
| 2 | CORTEX_DEBUG_ETM | azonenberg_pcb:CONN_HEADER_1.27MM_2x10_SMT_SAMTEC_FTSH-110-01-L-DV-K | J2, J5 |
| 2 | ECS-1612MV-250-CN | azonenberg_pcb:OSCILLATOR_1.6x1.2 | U11, U12 |
| 2 | GROUND | azonenberg_pcb:TESTPOINT_SMT_KEYSTONE_5016 | TP14, TP15 |
| 2 | PMOD_HOST | azonenberg_pcb:CONN_HEADER_2.54MM_2x6_RA_PMOD_HOST | J12, J13 |
| 2 | RED | azonenberg_pcb:EIA_0402_LED | D3, D12 |
| 2 | SWITCH | azonenberg_pcb:SWITCH_RAFI_MICON_5 | SW1, SW2 |
| 1 | 0.1 | azonenberg_pcb:EIA_0402_RES_NOSILK | R48 |
| 1 | 1 uH | azonenberg_pcb:INDUCTOR_YUDEN_NRS5030 | L1 |
| 1 | 100 uF | azonenberg_pcb:EIA_1210_CAP_NOSILK | C56 |
| 1 | 162K | azonenberg_pcb:EIA_0402_RES_NOSILK | R12 |
| 1 | 1M | azonenberg_pcb:EIA_0402_RES_NOSILK | R22 |
| 1 | 200K | azonenberg_pcb:EIA_0402_RES_NOSILK | R20 |
| 1 | 3A | azonenberg_pcb:EIA_0402_RES_NOSILK | F1 |
| 1 | 511K | azonenberg_pcb:EIA_0402_RES_NOSILK | R13 |
| 1 | 960-27-12-F-AB-0 | azonenberg_pcb:HEATSINK_WAKEFIELDVETTE_960-27-12-D-AB-0 | M1 |
| 1 | AT24MAC402 | azonenberg_pcb:DFN_8_0.5MM_2x3MM_TALL | U15 |
| 1 | BARREL_JACK | azonenberg_pcb:CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J1 |
| 1 | CONN_01X03 | azonenberg_pcb:CONN_HEADER_2.54MM_1x3 | J3 |
| 1 | CONN_01X05 | azonenberg_pcb:CONN_HEADER_2.54MM_1x5_REFLOW | TP10 |
| 1 | CONN_01X06 | azonenberg_pcb:CONN_HEADER_2.54MM_1x6_REFLOW | J8 |
| 1 | CONN_SFP_HOST | azonenberg_pcb:CONN_SFP+_AMPHENOL_UE76_A10_2000T | J4 |
| 1 | LDO1117-12 | azonenberg_pcb:SOT223-4 | U8 |
| 1 | LDO1117-18 | azonenberg_pcb:SOT223-4 | U6 |
| 1 | LOGO_ESD | azonenberg_pcb:LOGO_ESD_SENSITIVE_7MM | M6 |
| 1 | LOGO_LONGTHING | azonenberg_pcb:LONGTHING-1200DPI | M5 |
| 1 | LOGO_OSHW | w_logo:Logo_silk_OSHW_6x6mm | M7 |
| 1 | LOGO_ROHS | w_logo:Logo_silk_ROHS_5x2.8mm | M8 |
| 1 | LOGO_WEEE | w_logo:Logo_silk_WEEE_3.4x5mm | M9 |
| 1 | LTC3374-QFN | azonenberg_pcb:QFN_38_0.5MM_5x7MM | U1 |
| 1 | S25FL128SAGBHIA10 | azonenberg_pcb:BGA_24_6x8_DEPOP1_1MM | U32 |
| 1 | S27KL0642GABHB020 | azonenberg_pcb:BGA_24_6x8_DEPOP1_1MM | U18 |
| 1 | SFP_CAGE | azonenberg_pcb:CONN_SFP_CAGE_TE_2007194-1 | J7 |
| 1 | SIT9121AI-2BF-XXS156.250000G | azonenberg_pcb:OSCILLATOR_LVDS_3.2x2.5 | U10 |
| 1 | SIT9121AI-2BF-XXS200.000000G | azonenberg_pcb:OSCILLATOR_LVDS_3.2x2.5 | U16 |
| 1 | SMPM | azonenberg_pcb:CONN_SMPM_AMPHENOL_C925-197J-51PT | J10 |
| 1 | STM32L431-QFN48 | azonenberg_pcb:QFN_48_0.5MM_7x7MM | U2 |
| 1 | STM32MP257FAI3 | azonenberg_pcb:BGA_436_18x18_DEPOP_0.8MM | U5 |
| 1 | TCA6424A | azonenberg_pcb:QFN_32_0.5MM_5x5MM | U13 |
| 1 | W25Q80BV | azonenberg_pcb:SOIC_8_5.3MM | U17 |
| 1 | XC7K160T-1FFG676C | azonenberg_pcb:BGA_676_27x27_FULLARRAY_1MM_FFG676 | U4 |
| 1 | XILINX_JTAG | azonenberg_pcb:XILINX_JTAG_PTH_MOLEX_0878311420 | J6 |
Similar boards
- 10 layers130 × 90 mm

- 6 layers90 × 94.5 mm

Fpga stm32-ifaces
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
274 parts17BSD-3-Clause - 8 layers126 × 117 mm

- 10 layers165 × 121 mm

Triggercrossbar
azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling
633 parts8BSD-3-Clause - 4 layers93 × 69 mm

Lcbringup
azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
207 parts36BSD-3-Clause - 8 layers145 × 139 mm

Latentpink
azonenberg/latentpacket
The LATENTPACKET network infrastructure platform
841 parts30BSD-3-Clause - 4 layers48 × 45.5 mm

Stm32h750-expansion
azonenberg/efinix-tests
Miscellaneous experiments with Efinix FPGAs
73 parts1BSD-3-Clause - 8 layers154 × 125 mm

Questions
How big is the Mp2-xc7k test PCB?
It measures 100 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Mp2-xc7k test use?
351 parts, built around the STM32MP257FAI3, XC7K160T-1FFG676C, S25FL128SAGBHIA10 and NCP45525IMNTWG-H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mp2-xc7k test KiCad files?
From the azonenberg/stm32mp2-baremetal-tests repository on GitHub, at the commit this page was made from: the board is pcb/mp2-xc7k-test/mp2-xc7k-test.kicad_pcb and its schematic pcb/mp2-xc7k-test/clocking.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mp2-xc7k test design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).