8 layers145 × 139 mm
Latentpink
azonenberg/latentpacket
The LATENTPACKET network infrastructure platform
841 parts30BSD-3-Clause
AT24MAC402-XHM
Microchip Technology
1.7V to 5.5V, I2C-Compatible (2-wire) 2-Kbit (256 x 8) Serial EEPROM with a EUI-48 Address
- Part id
- microchip/AT24MAC402-XHM
- Category
- Uncategorised
- Package
- TSSOP8
- Pins
- 8
- Used on
- 12 open-source boards
Overview
The AT24MAC402-XHM is an uncategorised made by Microchip Technology in a TSSOP8 package with 8 pins. 1.7V to 5.5V, I2C-Compatible (2-wire) 2-Kbit (256 x 8) Serial EEPROM with a EUI-48 Address.
PCBKit's library has its KiCad symbol (Logic:AT24MAC402-XHM, from CERN's library) and its footprint (Package_SO:TSSOP-8_4.4x3mm_P0.65mm, from KiCad's library), ready for a KiCad board. 12 open-source boards in 10 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | A0 | Input |
| 2 | A1 | Input |
| 3 | A2 | Input |
| 4 | GND | Power in |
| 5 | SDA | Input/output |
| 6 | SCL | Input |
| 7 | WP | Input |
| 8 | VCC | Power in |
- 10 layers130 × 90 mm
- 4 layers154.5 × 137 mm
Kup lulz
azonenberg/misc-devboards
Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo
384 parts17BSD-3-Clause - 10 layers165 × 121 mm
Triggercrossbar
azonenberg/triggercrossbar
Rack mountable crossbar matrix for T&M trigger in/out signals, allowing dynamic reconfiguration of an experiment without recabling
633 parts8BSD-3-Clause - 4 layers100 × 70 mm
Mp2-xc7k test
azonenberg/stm32mp2-baremetal-tests
Experimenting with bare metal STM32MP2 development
351 parts4BSD-3-Clause - 4 layers42 × 42 mm
- 4 layers48 × 45.5 mm
Stm32h750-expansion
azonenberg/efinix-tests
Miscellaneous experiments with Efinix FPGAs
73 parts1BSD-3-Clause - 4 layers122 × 87 mm
Parts like it
8
LTC726XT8/R8
TSSOP-8LUncategorisedLinearinAO8814-TP
TSSOP-8UncategorisedTECH PUBLICTPM8205AET8
TSSOP-8UncategorisedTECH PUBLICSD8190
TSSOP-8UncategorisedWAVEFDW9926NZ-TP
TSSOP-8UncategorisedTECH PUBLICBAA-I8T1U7
TSSOP8Battery Protection IC for 2-Serial-Cell PackABLICUncategorisedS-8209ACA-T8T1U
TSSOP8Battery Protection IC with Cell-Balance Function (Overcharge Detection Voltage 4.350V)ABLICUncategorisedAD7683BRM
TSSOP816-Bit, 100 kSPS, Single-Ended, PulSAR ADCAnalog DevicesUncategorised
Questions
Is there a KiCad symbol and footprint for the AT24MAC402-XHM?
Yes. The symbol is Logic:AT24MAC402-XHM and the footprint Package_SO:TSSOP-8_4.4x3mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the AT24MAC402-XHM?
TSSOP8, with 8 pins. Its footprint is drawn on this page.
What can replace the AT24MAC402-XHM?
Parts like it in the library: the LTC726XT8/R8 by Linearin, the AO8814-TP by TECH PUBLIC, the TPM8205AET8 by TECH PUBLIC and the SD8190 by WAVE. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the AT24MAC402-XHM?
12 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.