
Current sink or swim
ALeggeUp/current-sink-or-swim
Project work from The Online Electronics Aprenticeship program at Contextual Electronics

K64-io pcb is an open-source printed circuit board by ratsept, from the ratsept/k64-io-pcb repository on GitHub. It is a 4-layer board of 122 × 87 mm with 181 parts on 130 nets, routed with 865 tracks and 104 vias.
It is built around the SN65HVD72DRBR, DRV8871DDARQ1 and LMR62421XMF, with the MAX31865AAP+, AT24MAC402-XHM and FM24C64B-G among its other parts. Its parts include 62 capacitors, 54 resistors, 21 connectors, 17 ICs and 13 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100n | Capacitors_SMD:C_0402 | C3, C10, C13, C14, C16, C22, C43, C44, C45, C57, C58, C59, C60, C61, C62, C63 +2 |
| 12 | 1k | Resistors_SMD:R_0402 | R45, R46, R47, R49, R50, R51, R53, R54, R55, R67, R69, R70 |
| 10 | 1n | Capacitors_SMD:C_0402 | C4, C5, C9, C11, C23, C24, C25, C26, C27, C28 |
| 8 | 33R | Resistors_SMD:R_0402 | R15, R16, R17, R20, R21, R25, R26, R27 |
| 8 | CONN_01X01 | Mounting_Holes:MountingHole_3.2mm_M3_Pad | P19, P20, P21, P22, P23, P24, P25, P26 |
| 8 | L_Small | Capacitors_SMD:C_0805 | L1, L2, L4, L5, L6, L7, L8, L9 |
| 6 | 10k | Resistors_SMD:R_0402 | R10, R14, R34, R35, R36, R66 |
| 5 | 100k | Resistors_SMD:R_0402 | R9, R48, R52, R56, R68 |
| 5 | 100n/50V | Capacitors_SMD:C_0402 | C29, C49, C51, C53, C56 |
| 5 | 2u2 | Capacitors_SMD:C_0402 | C12, C15, C17, C18, C64 |
| 4 | 100R | Resistors_SMD:R_0402 | R18, R58, R59, R63 |
| 4 | 10u | Capacitors_SMD:C_1210 | C34, C35, C36, C37 |
| 4 | 1u/6V3 | Capacitors_SMD:C_0402 | C30, C50, C52, C54 |
| 4 | 4k7 | Resistors_SMD:R_0402 | R60, R61, R62, R64 |
| 4 | ? | Housings_DIP:DIP-4_W7.62mm | U14, U15, U16, U19 |
| 4 | DNP | Resistors_SMD:R_0402 | R1, R2, R3, R13 |
| 4 | ZENERsmall | Diodes_SMD:SOD-323 | D15, D16, D17, D20 |
| 3 | 100u | Capacitors_Tantalum_SMD:TantalC_SizeB_EIA-3528_Reflow | C31, C32, C33 |
| 3 | DBG HEADER | Pin_Headers:Pin_Header_Straight_1x02 | P2, P12, P13 |
| 2 | 1000uF/50V | Capacitors_ThroughHole:C_Radial_D12.5_L25_P5 | C2, C55 |
| 2 | 1u | Capacitors_SMD:C_0402 | C6, C7 |
| 2 | 24p | Capacitors_SMD:C_0402 | C20, C21 |
| 2 | 680R | Resistors_SMD:R_0402 | R22, R24 |
| 2 | 75R | Resistors_SMD:R_0402 | R11, R12 |
| 2 | DNP | Resistors_SMD:R_1206 | R77, R78 |
| 2 | D_TVS | Diodes_SMD:Diode-SMA_Standard | D1, D6 |
| 2 | Led_Small | LEDs:LED_0805 | D18, D19 |
| 1 | 0 | Resistors_SMD:R_0402 | R65 |
| 1 | 100p | Capacitors_SMD:C_0402 | C19 |
| 1 | 100u/50V | Capacitors_ThroughHole:C_Radial_D8_L11.5_P3.5 | C1 |
| 1 | 10uH | Resistors_SMD:R_0805 | L3 |
| 1 | 120R | Resistors_SMD:R_0402 | R23 |
| 1 | 22u | Capacitors_SMD:C_1210_HandSoldering | C38 |
| 1 | 25MHz | Crystals:crystal_FA238-TSX3225 | X1 |
| 1 | 32.768KHz | Crystals:Crystal_Round_Horizontal_2mm | Y1 |
| 1 | 32K | Resistors_SMD:R_0402 | R57 |
| 1 | 33uH | wazombi:ASPI-0315FS | L11 |
| 1 | 400R 0.1% | Resistors_SMD:R_1206_HandSoldering | R37 |
| 1 | 470p | Capacitors_SMD:C_0805_HandSoldering | C42 |
| 1 | 47u | Capacitors_SMD:c_elec_4x5.3 | C40 |
| 1 | 4u7 | Capacitors_SMD:C_1210_HandSoldering | C39 |
| 1 | 6k49 | Resistors_SMD:R_0402 | R19 |
| 1 | AT24MAC402 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U4 |
| 1 | Ag9700-FL | wazombi:Ag9700-sil | U2 |
| 1 | CAN HEADER | Pin_Headers:Pin_Header_Straight_1x04 | J2 |
| 1 | CAN_transceiver | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U7 |
| 1 | COMMON-MODE-FILTER | wazombi:DR331 | L10 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | P3 |
| 1 | DNP | Capacitors_SMD:C_0805_HandSoldering | C41 |
| 1 | DRV8871DDAR | Housings_SOIC:SOIC-8-1EP_3.9x4.9mm_Pitch1.27mm | U17 |
| 1 | D_Schottky_Small | Diodes_SMD:SMC_Standard | D2 |
| 1 | D_Schottky_x2_ACom_AKK | TO_SOT_Packages_SMD:SOT-23 | D11 |
| 1 | Debug serial | Pin_Headers:Pin_Header_Straight_1x06 | P14 |
| 1 | EXT SUPPLY OUTPUT | wazombi:JST_VH_3.96mm_2pin | P5 |
| 1 | FM24C64B | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | IC1 |
| 1 | I2C HEADER | Pin_Headers:Pin_Header_Straight_1x02 | P9 |
| 1 | KSZ8081RNACA_QFN-24 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U5 |
| 1 | LM2931 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U8 |
| 1 | LMR62421 | TO_SOT_Packages_SMD:SOT-23-5 | U9 |
| 1 | L_Small | Inductors:NR4018_HandSoldering | L12 |
| 1 | L_Small | Resistors_SMD:R_1206_HandSoldering | L13 |
| 1 | Low I(rev) | Diodes_SMD:SOD-323 | D5 |
| 1 | MAX31865 | Housings_DFN_QFN:QFN-20-1EP_5x5mm_Pitch0.65mm | U10 |
| 1 | MK64FN1M0VLL12TQFP100_LQFP100 | wazombi:LQFP-100_14x14mm_Pitch0.5mm | U18 |
| 1 | R-78E-1.0 | wazombi:R-78E-1.0 | U1 |
| 1 | RESERVE POWER OUTPUT | wazombi:Phoenix_SMKDS_2pin | P6 |
| 1 | RJ45_LEDS_SHIELD | wazombi:RJHSE538X | J1 |
| 1 | RS-485 | wazombi:Phoenix_SMKDS_2pin | P4 |
| 1 | SN65HVD72DR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U6 |
| 1 | SPI HEADER | Pin_Headers:Pin_Header_Straight_1x06 | P8 |
| 1 | SWD HEADER | wazombi:1X05-1.27MM | P1 |
| 1 | eth_magnetics | wazombi:WE-749010013 | T1 |
| 1 | opamp | TO_SOT_Packages_SMD:SOT-23-5 | U3 |

ALeggeUp/current-sink-or-swim
Project work from The Online Electronics Aprenticeship program at Contextual Electronics

cepya2022/Water_Quality_Probe-
The development of open-source code and hardware instruments enables both the creation of new technologies and the redesign and adaptation of existing instruments to the user's specific needs.

plainsimpledot/currentSink
1st PCB project building a current sink with uController interface


waynegramlich/synchro_drive_motor_driver_pcb
Dual motor drive for dual motor synchro drive PCB

adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.


It measures 122 × 87 mm and has 4 copper layers, 1.6 mm thick.
181 parts, built around the SN65HVD72DRBR, DRV8871DDARQ1, LMR62421XMF and MAX31865AAP+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ratsept/k64-io-pcb repository on GitHub, at the commit this page was made from: the board is k64-io-pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ratsept before reusing the design.