Skip to the content
9

NCP45525IMNTWG-H

onsemiExtended

-40℃~+85℃ 3V~5.5V DFN-8-EP(2x2) Charge Pumps ROHS

Part id
onsemi/NCP45525IMNTWG-H
Category
AC DC Controllers And Regulators
Package
DFN-8-EP(2x2)
Pins
9
In stock
20 at JLCPCB (C603741)
Used on
8 open-source boards

Overview

The NCP45525IMNTWG-H is an AC DC Controllers And Regulator made by onsemi in a DFN-8-EP(2x2) package with 9 pins. -40℃~+85℃ 3V~5.5V DFN-8-EP(2x2) Charge Pumps ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:NCP45525IMNTWG-H, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-8_L2.0-W2.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. 20 are in stock at JLCPCB (part C603741). 8 open-source boards in 6 repositories on GitHub use it.

Symbol

1VIN2EN3VCC4GND5BLEED6PG/SR7VOUT8VOUT9VIN
EasyEDA_Cloud:NCP45525IMNTWG-HFrom EasyEDA

Footprint

9
EasyEDA_Cloud:DFN-8_L2.0-W2.0-P0.50-BL-EPFrom EasyEDA

Pinout

9
The pins of the NCP45525IMNTWG-H
PinNameType
1VINUnspecified
2ENUnspecified
3VCCUnspecified
4GNDUnspecified
5BLEEDUnspecified
6PG/SRUnspecified
7VOUTUnspecified
8VOUTUnspecified
9VINUnspecified

Open-source boards using it

8
  • 8 layers280 × 195 mmMaxwell main, the printed circuit board in 3D

    Maxwell main

    azonenberg/starshipraider

    Open hardware test equipment

    997 parts193BSD-3-Clause
  • 10 layers130 × 90 mmMain pcb, the printed circuit board in 3D

    Main pcb

    azonenberg/dumptruck

    FPGA based dumper for flashes and more

    445 parts17BSD-3-Clause
  • 8 layers126 × 117 mmDemo board, the printed circuit board in 3D

    Demo board

    azonenberg/electronics-training

    Training materials for classes etc

    311 parts15
  • 4 layers100 × 70 mmMp2-xc7k test, the printed circuit board in 3D

    Mp2-xc7k test

    azonenberg/stm32mp2-baremetal-tests

    Experimenting with bare metal STM32MP2 development

    351 parts4BSD-3-Clause
  • 2 layers66 × 93.5 mmChristmas tree, the printed circuit board in 3D

    Christmas tree

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    65 parts17BSD-3-Clause
  • 4 layers42 × 157.5 mmQuad relay mux, the printed circuit board in 3D

    Quad relay mux

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    102 parts17BSD-3-Clause
  • 4 layers57 × 60 mmT20-l431-carrier, the printed circuit board in 3D

    T20-l431-carrier

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    60 parts17BSD-3-Clause
  • 8 layers37 × 40.5 mmWatch main, the printed circuit board in 3D

    Watch main

    ben5049/Smart-Watch

    This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.

    146 partsApache-2.0

Parts like it

2

Questions

Is there a KiCad symbol and footprint for the NCP45525IMNTWG-H?

Yes. The symbol is EasyEDA_Cloud:NCP45525IMNTWG-H and the footprint EasyEDA_Cloud:DFN-8_L2.0-W2.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the NCP45525IMNTWG-H?

DFN-8-EP(2x2), with 9 pins. Its footprint is drawn on this page.

Where is the NCP45525IMNTWG-H datasheet?

onsemi publishes it: the Datasheet link on this page opens it.

Where can I order the NCP45525IMNTWG-H?

JLCPCB lists it as part C603741, with 20 in stock; the sellers' links on this page open their listings.

What can replace the NCP45525IMNTWG-H?

Parts like it in the library: the APL3540QBI-TRG by Anpec Elec and the TS4305AMLTRT by SEMTECH. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the NCP45525IMNTWG-H?

8 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.