Boards using the ATTINY13A-SSU

46 boards

Boards in 37 GitHub repositories, designed in KiCad, that use the ATTINY13A-SSU by Microchip Technology (-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATTINY13A-SSU’s symbol, footprint and pinout are on its own page.

2 layers33 × 30 mm
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT
2 layers200 × 100 mm
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0
2 layers
TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9
2 layers10.2 × 22.3 mm
Led
HWXLR8/yinyoudeng
音游灯 RGB LED PCB for rhythm game buttons
5 parts8GPL-3.0
2 layers27.9 × 66.2 mm
Rfid
NFQ-Makers/rfid-reader
A simple 125KHz rfid reader based on a ATMega8
61 parts7GPL-2.0
2 layers
Attiny13ServoTester
matrn/Attiny13ServoTester
Servo tester for Attiny 13.
18 parts4MIT
2 layers50 × 50 mm
Foobot controller interface
mooped/foobot
Foobot robot table football
29 parts4MIT
2 layers90 × 100 mm
Meshcore NaIon
Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.
154 parts3
2 layers51 × 70 mm
Auto dimmer
ilyushkin/auto_dimmer
Automatic dimmer for IKEA NYMANE (103.569.62) lamp based on AVR ATtiny13A MCU.
56 parts2GPL-3.0
2 layers
RGB LED
Bindless-Chicken/RGB-Beacon
Dead Simple CR2032 sized hackable RGB LED
19 parts1
2 layers25 × 31.5 mm
Motor Driver
universalgeek56/UG56-attiny13a-pwm-controller
ATtiny13A-based PWM controller for brushed motors, lights, heaters and fans. Soft start. Soft stop. Voltage compensation. Protection. Hysteresis. Same hardware. Different loads. Scale it with better MOSFETs.
21 parts1MIT
2 layers94 × 68.5 mm
Wireless temp sensor
Akilesh-10/Wireless_Temperature_Sensor
This is pcb project
21 parts
2 layers48 × 24 mm
Attiny13A Devboard v1 SMD
alexanderjg85/simple_attiny13a_devboard
A simple development board with an LED and GPIOs on Pin header, includes also ISP Header, Power supply with screw terminal
20 partsMIT
2 layers12 × 27.5 mm
StepperDriver
bask185/microStepper

20 parts
2 layers55.9 × 10.7 mm
Pinpointer
canabis5w5/pinpointer
pinpointer on attiny13
23 partsGPL-3.0
2 layers42.5 × 29.2 mm
Bano
CyberNet-Git/electronics4rc
Automatically exported from code.google.com/p/electronics4rc
26 parts
2 layers28 × 32 mm
Tiny13-Nachtlicht
darc-s09/bausaetze
Diverse Bausätze
9 parts
2 layers35 × 23 mm
Hat PCB
dylancvdean/thinkingcapHW

24 parts
2 layers39.6 × 23.9 mm
Tester serw
ironiron/servo-tester
Small servo tester designed for Attiny13a. Pulse width 0.5-2.5ms; 3 modes: oscillating, normal and neutrum.
10 partsUnlicense
6 layers99.7 × 63.9 mm
Nescart
Keitark/fc-rom-vomitter
Wi-Fi NROM development cartridge for Famicom: ESP32-S3, SRAM, KiCad, firmware, fabrication evidence, and an experimental NES variant.
84 partsMIT
2 layers26.8 × 14.2 mm
Beeper
koskev/betaflight-beeper
This is a small beeper board, which is designed to find a lost model aircraft. It functions pretty much identical to the other commercial beepers.
31 partsGPL-3.0
2 layers40 × 40 mm
BinaryBlinkLed
mcotera/BinaryBlinkLed

22 parts
2 layers16.8 × 13.6 mm
E Fidget Lite
miameows/E-Fidget-Lite
The itty-bitty PCB fidget toy.
11 partsMIT
2 layers
ChristmasPCB
Neposis/ChristmasPCB

33 parts