2 layers27.3 × 19.7 mm
RCswitch2
CyberNet-Git/electronics4rc
Automatically exported from code.google.com/p/electronics4rc
10 parts
2 layers42.5 × 29.2 mm
Automatically exported from code.google.com/p/electronics4rc
- Size
- 42.5 × 29.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 24
- Pads
- 75
- Tracks, vias
- 174, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Mar 2015
- Updated
- 1 Jun 2025
Overview
Bano is an open-source printed circuit board by CyberNet-Git, from the CyberNet-Git/electronics4rc repository on GitHub. It is a 2-layer board of 42.5 × 29.2 mm with 26 parts on 24 nets, routed with 174 tracks and 5 vias.
It is built around the ATTINY13A-SSU, BC817 and SS12. Its parts include 6 resistors, 4 ICs, 3 diodes, 3 transistors and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY13A-SSU
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
SS12
SMA(DO-214AC)Schottky Diodeshongjiacheng
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0,33 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R5, R6 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3 |
| 3 | 47uh | Inductor_THT:L_Radial_D10.0mm_P5.00mm_Fastron_07M | L1, L2, L3 |
| 3 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | SS12 | Diode_SMD:D_SOD-523 | D1, D2, D3 |
| 3 | ZXLD1350 | Package_TO_SOT_SMD:TSOT-23-5 | U2, U3, U4 |
| 1 | 3S LiPO | Connector_Wire:SolderWirePad_1x02_P3.81mm_Drill1mm | - PWR + |
| 1 | 4.7uF | Capacitor_SMD:C_Elec_4x5.4 | C1 |
| 1 | ATtiny13A-SSU | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | LED1 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J3 |
| 1 | LED2 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J4 |
| 1 | LED3 | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | PPM | Connector_Wire:SolderWirePad_1x03_P3.175mm_Drill1mm | Receiver |
| 1 | PROGRAM | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Horizontal | AVR ISP |
More from CyberNet-Git/electronics4rc
1Similar boards
- 2 layers60 × 18 mm
- 2 layers47.7 × 45.5 mm
- 4 layers88 × 72 mm
- 2 layers117.1 × 86 mm
- 2 layers72.3 × 87.3 mm
- 2 layers33 × 30 mm
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes
21 parts34MIT - 2 layers200 × 100 mm
Keyboard
dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere
225 parts14Apache-2.0 - 2 layers
TX5823
ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.
94 parts9
Questions
How big is the Bano PCB?
It measures 42.5 × 29.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bano use?
26 parts, built around the ATTINY13A-SSU, BC817 and SS12. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bano KiCad files?
From the CyberNet-Git/electronics4rc repository on GitHub, at the commit this page was made from: the board is BanoMy/Bano/Bano.kicad_pcb and its schematic RC-switch-2/RCswitch2/RCswitch2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bano design in my own project?
Its repository states no licence, so its author keeps all rights: ask CyberNet-Git before reusing the design.