Skip to the content
4 layers88 × 72 mmShroomShed MKII PCB, the printed circuit board in 3D

ShroomShed MKII PCB

OilyT/ShroomShedMKII
Size
88 × 72 mm
Copper layers
4
Thickness
1.6 mm
Parts
91
Nets
160
Pads
476
Tracks, vias
735, 151
Pours
16
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 Dec 2025
Updated
17 Aug 2026

Overview

ShroomShed MKII PCB is an open-source printed circuit board by OilyT, from the OilyT/ShroomShedMKII repository on GitHub. It is a 4-layer board of 88 × 72 mm with 91 parts on 160 nets, routed with 735 tracks and 151 vias.

It is built around the WS2811, TPS61085DGK and AMS1117-3.3, with the USBLC6-2SC6, XL-5050RGBC and BC817 among its other parts. Its parts include 27 capacitors, 19 resistors, 15 diodes, 11 connectors and 8 ICs. It belongs with the STM32 boards of this library.

Main components

8

Parts

91
QtyValueFootprintReferences
12XL-5050RGBCLED_SMD:LED_RGB_5050-6D1, D2, D3, D4, D5, D6, D8, D9, D10, D11, D12, D13
9100nFCapacitor_SMD:C_0603_1608MetricC5, C11, C20, C21, C22, C23, C25, C26, C27
61uFCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C7, C8, C24
410kResistor_SMD:R_0603_1608MetricR12, R15, R17, R18
44k7Resistor_SMD:R_0603_1608MetricR3, R4, R10, R11
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
4WS2811Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U2, U5, U6
310uFCapacitor_SMD:C_0603_1608MetricC1, C9, C10
212pFCapacitor_SMD:C_0603_1608MetricC12, C13
21kResistor_SMD:R_0603_1608MetricR13, R19
22.2uFCapacitor_SMD:C_0603_1608MetricC17, C18
222uFCapacitor_SMD:C_0805_2012MetricC15, C16
233rResistor_SMD:R_0603_1608MetricR1, R16
25k1Resistor_SMD:R_0603_1608MetricR2, R6
11.1nFCapacitor_SMD:C_0603_1608MetricC6
1100kResistor_SMD:R_0603_1608MetricR7
112V_PWRConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ6
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
118kResistor_SMD:R_0603_1608MetricR8
1220uFCapacitor_SMD:CP_Elec_6.3x5.4C14
13V3_PWRConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ4
14.7uFCapacitor_SMD:C_0603_1608MetricC19
14.7uHInductor_SMD:L_7.3x7.3_H4.5L1
1500rResistor_SMD:R_0603_1608MetricR14
151kResistor_SMD:R_0603_1608MetricR5
156kResistor_SMD:R_0603_1608MetricR9
15V_PWRConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_VerticalJ5
1750mAFuse:Fuse_1210_3225Metric_Pad1.42x2.65mm_HandSolderF1
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U7
1BC817Package_TO_SOT_SMD:SOT-23Q1
1BLUELED_THT:LED_D4.0mmD14
1BOOT SELECTButton_Switch_SMD:SW_SPDT_Shouhan_MSK12C02SW2
1Display_Touch_SPIConnector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_VerticalJ11
1ERMConnector_JST:JST_XH_S4B-XH-A-1_1x04_P2.50mm_HorizontalJ8
1EVQ-Q2B03Wfootprints:EVQQ2_3_PANSW1
1GPIO_1Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_VerticalJ2
1GPIO_2Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ3
1LOGOLOGOG***
1REDLED_SMD:LED_0603_1608MetricD15
1SD_SPIConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ10
1SHT31Connector_JST:JST_XH_S4B-XH-A-1_1x04_P2.50mm_HorizontalJ7
1SS12Diode_SMD:D_SMAD7
1STM32H562VGTxPackage_QFP:LQFP-100_14x14mm_P0.5mmU8
1SWD 14 pin headerConnector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMDJ9
1TPS61085DGKPackage_SO:VSSOP-8_3x3mm_P0.65mmU3
1TYPE-C-31-M-12footprints:HRO_TYPE-C-31-M-12J1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U4

More from OilyT/ShroomShedMKII

2
  • 2 layers18 × 60 mmERM PCB, the printed circuit board in 3D

    ERM PCB

    OilyT/ShroomShedMKII

    16 parts

Similar boards

  • 2 layers65 × 74 mmSx70battery, the printed circuit board in 3D

    Sx70battery

    ZeshuLiu/SX-70-Mk2

    把板子上的U+ U- GND VCC焊到usb线上,连接电脑后可以当作树莓派Pico开发板进行操作,上传代码的参见这里(树莓派官网)。 \ 在将机身主控安装至机器内部之前需要将micropython固件及代码烧录至控制器中。后续可以通过机身控制器上的USB接口连接开发板并更新python代码。 将code根目录中的所有python文件上传至控制器(文件夹不需要),并且将gmain.py命名为…

    46 parts2GPL-3.0
  • 4 layers100 × 50 mmChronolog, the printed circuit board in 3D

    Chronolog

    slemanz/chronolog

    STM32-based temperature data logger with RTC, NOR flash storage, LCD and Wi-Fi. Hardware and firmware.

    95 parts5
  • 4 layers100 × 100 mmSmartUpPCB, the printed circuit board in 3D

    SmartUpPCB

    mikh3x4/SmartUpPCB

    this two may be needed to get submodule cloned

    107 parts
  • 4 layers68 × 60 mmRoboCore, the printed circuit board in 3D

    RoboCore

    Plastal-Bot-Builders/RoboCoreDocumentation

    RoboCore is a classroom robot kit and coding platform, designed and built in Zambia by Plastal-Bot Builders (Lusaka).

    104 partsMIT
  • 2 layers92 × 42 mmISSptr, the printed circuit board in 3D

    ISSptr

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    31 parts915
  • 2 layers65 × 55 mmEsp32-s3, the printed circuit board in 3D

    Esp32-s3

    duanestorey/hifi-amp

    A high-fidelity four-channel amplifier with active-crossovers and room correction

    37 parts1
  • 2 layers42.5 × 29.2 mmBano, the printed circuit board in 3D

    Bano

    CyberNet-Git/electronics4rc

    Automatically exported from code.google.com/p/electronics4rc

    26 parts

Questions

How big is the ShroomShed MKII PCB PCB?

It measures 88 × 72 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ShroomShed MKII PCB use?

91 parts, built around the WS2811, TPS61085DGK, AMS1117-3.3 and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ShroomShed MKII PCB KiCad files?

From the OilyT/ShroomShedMKII repository on GitHub, at the commit this page was made from: the board is ShroomShed_MKII_PCB/ShroomShed_MKII_PCB.kicad_pcb and its schematic ShroomShed_MKII_PCB/ERM_PCB/ERM_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ShroomShed MKII PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask OilyT before reusing the design.