Skip to the content
12345678

ATTINY13A-SSU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY13A-SSU
Category
Microcontrollers (MCU, MPU, SOC)
Package
SOIC-8
Pins
8
In stock
8,912 at JLCPCB (C40382)
Used on
46 open-source boards

Overview

The ATTINY13A-SSU is a microcontroller made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny13A-SS, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 8,912 are in stock at JLCPCB (part C40382). 46 open-source boards in 37 repositories on GitHub use it.

Symbol

1RESET/PB52PB33PB44GND5PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny13A-SSFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

4
Supply, least
1.8 V · VCC, recommended operating, min · p. 1
Supply, most
5.5 V · VCC, recommended operating, max · p. 1
Works from
-40 °C · industrial operating temperature, min · p. 11
Works up to
85 °C · industrial operating temperature, max · p. 11

Pinout

8
The pins of the ATTINY13A-SSU
PinNameType
1RESET/PB5Input/output
2PB3Input/output
3PB4Input/output
4GNDPower in
5PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

46See all 46
  • 2 layers33 × 30 mmMora villogo, the printed circuit board in 3D

    Mora villogo

    kissadamfkut/mora_blinker

    Simple LED blinker with ATtiny13A for educational purposes

    21 parts34MIT
  • 2 layers200 × 100 mmKeyboard, the printed circuit board in 3D

    Keyboard

    dragonlock2/kicadboards

    Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

    225 parts14Apache-2.0
  • 2 layersTX5823, the printed circuit board in 3D

    TX5823

    ep092/TX5823

    FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.

    94 parts9
  • 2 layers10.2 × 22.3 mmLed, the printed circuit board in 3D

    Led

    HWXLR8/yinyoudeng

    音游灯 RGB LED PCB for rhythm game buttons

    5 parts8GPL-3.0
  • 2 layers27.9 × 66.2 mmRfid, the printed circuit board in 3D

    Rfid

    NFQ-Makers/rfid-reader

    A simple 125KHz rfid reader based on a ATMega8

    61 parts7GPL-2.0
  • 2 layers90 × 100 mmMeshcore NaIon, the printed circuit board in 3D

    Meshcore NaIon

    Alksndr55/mesh-repeater

    Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.

    154 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ATTINY13A-SSU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny13A-SS and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY13A-SSU?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY13A-SSU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY13A-SSU?

JLCPCB lists it as part C40382, with 8,912 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY13A-SSU?

Parts like it in the library: the PIC12F1822-I/SN by Microchip Technology, the ATTINY202-SSN by Microchip Technology, the PIC12F675-I/SN by Microchip Technology and the PIC12F683-I/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY13A-SSU?

46 boards in 37 repositories on GitHub; the most starred are listed on this page, with their KiCad files.