
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes

音游灯 RGB LED PCB for rhythm game buttons
Led is an open-source printed circuit board by HWXLR8, from the HWXLR8/yinyoudeng repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 10.2 × 22.3 mm with 5 parts on 9 nets, routed with 49 tracks and 10 vias.
It is built around the ATTINY13A-SSU. Its parts include 1 capacitor, 1 IC, 1 diode and 1 switch. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
BOM:
1 ATTINY13A-SSU
1 100nF SMD cap 0805
1 schottky diode (MFG# UPS115UE3)
1 4x4x1.5mm tactile SMD tactile push button
1 WS2812 LED on PCB with res+capPCBs should be manufactured at 2.0mm thickness instead of standard 1.6mm. Soldering the WS2812 module on to the PCB can be a bit tricky, so I designed a jig which simplifies the alignment of the parts. The model is available in jig/jig.stl.
Special thanks to Tim (cpldcpu) for the implementation of the WS2812 protocol.
享受音游 享受生活
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | ATtiny13A-SS | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | D_Schottky | Diode_SMD:D_Powermite_AK | D2 |
| 1 | LOGO | led:niu | G*** |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |

kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.




Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.

ilyushkin/auto_dimmer
Automatic dimmer for IKEA NYMANE (103.569.62) lamp based on AVR ATtiny13A MCU.
It measures 10.2 × 22.3 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the ATTINY13A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HWXLR8/yinyoudeng repository on GitHub, at the commit this page was made from: the board is pcb/led.kicad_pcb and its schematic pcb/led.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).