
PIC12F629-I/SN
Microchip TechnologyExtended
-40℃~+85℃ 1.75KB 128Byte 20MHz 2V~5.5V 5 64Byte 8 Bit Built-in FLASH PIC SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS
- Part id
- microchip/PIC12F629-I/SN
- Category
- Microcontrollers (MCU, MPU, SOC)
- Package
- SOIC-8
- Pins
- 8
- In stock
- 1,386 at JLCPCB (C8226)
- Used on
- 2 open-source boards
Overview
The PIC12F629-I/SN is a microcontroller made by Microchip Technology in a SOIC-8 package with 8 pins. -40℃~+85℃ 1.75KB 128Byte 20MHz 2V~5.5V 5 64Byte 8 Bit Built-in FLASH PIC SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:PIC12F629T-I_SN, from EasyEDA) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 1,386 are in stock at JLCPCB (part C8226). 2 open-source boards in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
11- Supply, least
- 2 V · VDD, recommended operating minimum, FOSC ≤ 4 MHz · p. 88
- Supply, most
- 5.5 V · VDD, recommended operating maximum, FOSC ≤ 4 MHz · p. 88
- Supply, least
- 3 V · VDD, recommended operating minimum, 4 MHz < FOSC ≤ 10 MHz · p. 88
- Supply, absolute maximum
- 6.5 V · VDD relative to VSS, absolute maximum · p. 85
- Works from
- -40 °C · TA, industrial operating minimum · p. 88
- Works up to
- 85 °C · TA, industrial operating maximum · p. 88
- Takes working
- 2.4 mA · IDD typical, 20 MHz, HS oscillator, VDD = 5.0 V · p. 89
- Takes at most
- 3 mA · IDD maximum, 20 MHz, HS oscillator, VDD = 5.0 V · p. 89
- Takes asleep
- 2.9 nA · IPD typical, VDD = 5.0 V, WDT, BOD, comparators, VREF and T1OSC disabled · p. 90
- A pin gives at most
- 25 mA · I/O sink current, absolute maximum per pin · p. 85
- Edge
- 10 ns · Port output rise time, typical · p. 98
What it is and has
16- Architecture
- 8-bit CMOS microcontroller · p. 3
- Instruction set
- 35 instructions · p. 3
- Maximum oscillator/clock input
- 20 MHz · p. 3
- Hardware stack
- 8 levels · p. 3
- Flash program memory
- 1024 words · p. 3
- SRAM
- 64 bytes · p. 3
- Data EEPROM
- 128 bytes · p. 3
- Comparator
- 1 · p. 3
- ADC
- None · p. 3
- Timers
- One 8-bit and one 16-bit timer · p. 3
- Sleep mode
- Power-saving Sleep mode · p. 3
- Brown-out detection
- Brown-out Detect (BOD) · p. 3
- Interrupt-on-change
- Interrupt-on-pin change · p. 3
- Weak pull-ups
- Individual programmable weak pull-ups · p. 3
- Code protection
- Programmable · p. 3
- Architecture
- 8-pin, Flash-based, 8-bit CMOS microcontroller · p. 1
Around it
14- cap unspecified
- between VDD and VSS; Place as close to the device as possible for best internal oscillator operation. · p. 56
- res 1 kor greater
- between VDD and MCLR; R1 in the recommended MCLR circuit. · p. 58
- cap 0.1 f
- between MCLR and VSS; C1 in the recommended MCLR circuit; optional, not critical. · p. 58
- cap 68-100 pF
- between OSC1 and VSS; Crystal oscillator C1, LP mode, 32 kHz; design guidance. · p. 55
- cap 68-150 pF
- between OSC1 and VSS; Crystal oscillator C1, XT mode, 100 kHz; design guidance. · p. 55
- cap 150-200 pF
- between OSC2 and VSS; Crystal oscillator C2, XT mode, 100 kHz; design guidance. · p. 55
- cap 15-30 pF
- between OSC1 and VSS; Crystal oscillator C1, XT mode, 2 MHz; design guidance. · p. 55
- cap 15-30 pF
- between OSC1 and VSS; Crystal oscillator C1, XT mode, 4 MHz; design guidance. · p. 55
- cap 15-30 pF
- between OSC1 and VSS; Crystal oscillator C1, HS mode, 8 MHz; design guidance. · p. 55
- cap 15-30 pF
- between OSC1 and VSS; Crystal oscillator C1, HS mode, 10 MHz; design guidance. · p. 55
- cap 15-30 pF
- between OSC1 and VSS; Crystal oscillator C1, HS mode, 20 MHz; design guidance. · p. 55
- cap 68-100 pF
- between OSC1 and VSS; Ceramic resonator C1, XT mode, 455 kHz; design guidance. · p. 55
- cap 15-68 pF
- between OSC1 and VSS; Ceramic resonator C1, XT mode, 2.0 MHz; design guidance. · p. 55
- res 50-100
- between MCLR and external low-level driver; Series resistor when applying a low level to MCLR. · p. 85
Specifications
175| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Ambient temperature under bias | min -40 · max 125 °C | 85 | |
| Storage temperature | min -65 · max 150 °C | 85 | |
| Voltage on VDD with respect to VSS | min -0.3 · max 6.5 V | 85 | |
| Voltage on MCLR with respect to Vss | min -0.3 · max 13.5 V | 85 | |
| Voltage on all other pins with respect to VSS | min -0.3 V | 85 | |
| Total power dissipation(1) | max 800 mW | 85 | |
| Maximum current out of VSS pin | max 300 mA | 85 | |
| Maximum current into VDD pin | max 250 mA | 85 | |
| Maximum output current sunk by any I/O pin | max 25 mA | 85 | |
| Maximum output current sourced by any I/O pin | max 25 mA | 85 | |
| Maximum current sunk by all GPIO | max 125 mA | 85 | |
| Maximum current sourced all GPIO | max 125 mA | 85 | |
| Operating temperature TA | Industrial | min -40 · max 85 °C | 88 |
| Supply Voltage VDD | PIC12F629/675 with A/D off; FOSC ≤ 4 MHz | min 2 · max 5.5 V | 88 |
| Supply Voltage VDD | 4 MHz < FOSC ≤ 10 MHz | min 3 · max 5.5 V | 88 |
| Supply Voltage VDD | D001D; frequency condition not stated in supplied text | min 4.5 · max 5.5 V | 88 |
| RAM Data Retention Voltage(1) VDR | Device in Sleep mode; characterized but not tested | min 1.5 V | 88 |
| VDD Rise Rate to ensure internal Power-on Reset signal SVDD | See section on Power-on Reset for details; characterized but not tested | min 0.05 V/ms | 88 |
| VBOD VBOD | typ 2.1 V | 88 | |
| Supply Current (IDD) IDD | FOSC = 32 kHz; LP Oscillator Mode; VDD = 2.0 V | typ 9 · max 16 A | 89 |
| Supply Current (IDD) IDD | FOSC = 32 kHz; LP Oscillator Mode; VDD = 3.0 V | typ 18 · max 28 A | 89 |
| Supply Current (IDD) IDD | FOSC = 32 kHz; LP Oscillator Mode; VDD = 5.0 V | typ 35 · max 54 A | 89 |
| Supply Current (IDD) IDD | FOSC = 1 MHz; XT Oscillator Mode; VDD = 2.0 V | typ 110 · max 150 A | 89 |
| Supply Current (IDD) IDD | FOSC = 1 MHz; XT Oscillator Mode; VDD = 3.0 V | typ 190 · max 280 A | 89 |
| Supply Current (IDD) IDD | FOSC = 1 MHz; XT Oscillator Mode; VDD = 5.0 V | typ 330 · max 450 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; XT Oscillator Mode; VDD = 2.0 V | typ 220 · max 280 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; XT Oscillator Mode; VDD = 3.0 V | typ 370 · max 650 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; XT Oscillator Mode; VDD = 5.0 V | typ 0.6 · max 1.4 mA | 89 |
| Supply Current (IDD) IDD | FOSC = 1 MHz; EC Oscillator Mode; VDD = 2.0 V | typ 70 · max 110 A | 89 |
| Supply Current (IDD) IDD | FOSC = 1 MHz; EC Oscillator Mode; VDD = 3.0 V | typ 140 · max 250 A | 89 |
| Supply Current (IDD) IDD | FOSC = 1 MHz; EC Oscillator Mode; VDD = 5.0 V | typ 260 · max 390 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; EC Oscillator Mode; VDD = 2.0 V | typ 180 · max 250 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; EC Oscillator Mode; VDD = 3.0 V | typ 320 · max 470 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; EC Oscillator Mode; VDD = 5.0 V | typ 580 · max 850 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; INTOSC Mode; VDD = 2.0 V | typ 340 · max 450 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; INTOSC Mode; VDD = 3.0 V | typ 500 · max 700 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; INTOSC Mode; VDD = 5.0 V | typ 0.8 · max 1.1 mA | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; EXTRC Mode; VDD = 2.0 V | typ 180 · max 250 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; EXTRC Mode; VDD = 3.0 V | typ 320 · max 450 A | 89 |
| Supply Current (IDD) IDD | FOSC = 4 MHz; EXTRC Mode; VDD = 5.0 V | typ 580 · max 800 A | 89 |
| Supply Current (IDD) IDD | FOSC = 20 MHz; HS Oscillator Mode; VDD = 4.5 V | typ 2.1 · max 2.95 mA | 89 |
| Supply Current (IDD) IDD | FOSC = 20 MHz; HS Oscillator Mode; VDD = 5.0 V | typ 2.4 · max 3 mA | 89 |
| Power-down Base Current (IPD) IPD | VDD = 2.0 V; WDT, BOD, Comparators, VREF, and T1OSC disabled | typ 0.99 · max 700 nA | 90 |
| Power-down Base Current (IPD) IPD | VDD = 3.0 V; WDT, BOD, Comparators, VREF, and T1OSC disabled | typ 1.2 · max 770 nA | 90 |
| Power-down Base Current (IPD) IPD | VDD = 5.0 V; WDT, BOD, Comparators, VREF, and T1OSC disabled | typ 2.9 · max 995 nA | 90 |
| WDT Current(1) | VDD = 2.0 V; includes base current | typ 0.3 · max 1.5 A | 90 |
| WDT Current(1) | VDD = 3.0 V; includes base current | typ 1.8 · max 3.5 A | 90 |
| WDT Current(1) | VDD = 5.0 V; includes base current | typ 8.4 · max 17 A | 90 |
| BOD Current(1) | VDD = 3.0 V; includes base current | typ 58 · max 70 A | 90 |
| BOD Current(1) | VDD = 5.0 V; includes base current | typ 109 · max 130 A | 90 |
| Comparator Current(1) | VDD = 2.0 V; includes base current | typ 3.3 · max 6.5 A | 90 |
| Comparator Current(1) | VDD = 3.0 V; includes base current | typ 6.1 · max 8.5 A | 90 |
| Comparator Current(1) | VDD = 5.0 V; includes base current | typ 11.5 · max 16 A | 90 |
| CVREF Current(1) | VDD = 2.0 V; includes base current | typ 58 · max 70 A | 90 |
| CVREF Current(1) | VDD = 3.0 V; includes base current | typ 85 · max 100 A | 90 |
| CVREF Current(1) | VDD = 5.0 V; includes base current | typ 138 · max 160 A | 90 |
| T1 OSC Current(1) | VDD = 2.0 V; includes base current | typ 4 · max 6.5 A | 90 |
| T1 OSC Current(1) | VDD = 3.0 V; includes base current | typ 4.6 · max 7 A | 90 |
| T1 OSC Current(1) | VDD = 5.0 V; includes base current | typ 6 · max 10.5 A | 90 |
| Input Low Voltage, I/O ports with TTL buffer VIL | 4.5V ≤ VDD ≤ 5.5V | max 0.8 V | 93 |
| Input Low Voltage, OSC1 (XT and LP modes) VIL | Note 1 | max 0.3 V | 93 |
| Input High Voltage, I/O ports with TTL buffer VIH | 4.5V ≤ VDD ≤ 5.5V | min 2 V | 93 |
| Input High Voltage, OSC1 (XT and LP modes) VIH | Note 1 | min 1.6 V | 93 |
| GPIO Weak Pull-up Current IPUR | VDD = 5.0V, VPIN = VSS; limits characterized but not tested | min 50 · typ 250 · max 400 A | 93 |
| Output Low Voltage, I/O ports VOL | IOL = 8.5 mA, VDD = 4.5V (Ind.) | max 0.6 V | 93 |
| Output Low Voltage, OSC2/CLKOUT (RC mode) VOL | IOL = 1.6 mA, VDD = 4.5V (Ind.) | max 0.6 V | 93 |
| OSC2 pin COSC2 | In XT, HS and LP modes when external clock is used to drive OSC1; characterized but not tested | max 15 pF | 94 |
| All I/O pins CIO | Capacitive Loading Specs on Output Pins; characterized but not tested | max 50 pF | 94 |
| VDD for Read/Write VDRW | Data EEPROM Memory; Using EECON to read/write; VMIN = Minimum operating voltage | max 5.5 V | 94 |
| Erase/Write cycle time TDEW | Data EEPROM Memory | typ 5 · max 6 ms | 94 |
| Characteristic Retention TRETD | Data EEPROM Memory; Provided no other specifications are violated | min 40 Year | 94 |
| VDD for Read VPR | Program Flash Memory; VMIN = Minimum operating voltage | max 5.5 V | 94 |
| VDD for Erase/Write VPEW | Program Flash Memory | min 4.5 · max 5.5 V | 94 |
| Erase/Write cycle time TPEW | Program Flash Memory | typ 2 · max 2.5 ms | 94 |
| Characteristic Retention TRETD | Program Flash Memory; Provided no other specifications are violated | min 40 Year | 94 |
| External CLKIN Frequency(1) FOSC | LP Osc mode | max 37 kHz | 96 |
| External CLKIN Frequency(1) FOSC | XT mode | max 4 MHz | 96 |
| External CLKIN Frequency(1) FOSC | HS mode | max 20 MHz | 96 |
| External CLKIN Frequency(1) FOSC | EC mode | max 20 MHz | 96 |
| Oscillator Frequency(1) FOSC | LP Osc mode | min 5 · max 37 kHz | 96 |
| Oscillator Frequency(1) FOSC | INTOSC mode | typ 4 MHz | 96 |
| Oscillator Frequency(1) FOSC | RC Osc mode | max 4 MHz | 96 |
| Oscillator Frequency(1) FOSC | XT Osc mode | min 0.1 · max 4 MHz | 96 |
| Oscillator Frequency(1) FOSC | HS Osc mode | min 1 · max 20 MHz | 96 |
| External CLKIN Period(1) TOSC | LP Osc mode | min 27 s | 96 |
| External CLKIN Period(1) TOSC | HS Osc mode | min 50 ns | 96 |
| External CLKIN Period(1) TOSC | EC Osc mode | min 50 ns | 96 |
| External CLKIN Period(1) TOSC | XT Osc mode | min 250 ns | 96 |
| Oscillator Period(1) TOSC | LP Osc mode | min 27 · max 200 s | 96 |
| Oscillator Period(1) TOSC | INTOSC mode | typ 250 ns | 96 |
| Oscillator Period(1) TOSC | RC Osc mode | min 250 ns | 96 |
| Oscillator Period(1) TOSC | XT Osc mode | min 250 · max 10000 ns | 96 |
| Oscillator Period(1) TOSC | HS Osc mode | min 50 · max 1000 ns | 96 |
| Instruction Cycle Time(1) TCY | TCY = 4/FOSC | min 200 ns | 96 |
| External CLKIN (OSC1) High / External CLKIN Low TosL, TosH | LP oscillator, TOSC L/H duty cycle; characterized but not tested | min 2 s | 96 |
| External CLKIN (OSC1) High / External CLKIN Low TosL, TosH | HS oscillator, TOSC L/H duty cycle; characterized but not tested | min 20 ns | 96 |
| External CLKIN (OSC1) High / External CLKIN Low TosL, TosH | XT oscillator, TOSC L/H duty cycle; characterized but not tested | min 100 ns | 96 |
| External CLKIN Rise / External CLKIN Fall TosR, TosF | LP oscillator; characterized but not tested | max 50 ns | 96 |
| External CLKIN Rise / External CLKIN Fall TosR, TosF | XT oscillator; characterized but not tested | max 25 ns | 96 |
| External CLKIN Rise / External CLKIN Fall TosR, TosF | HS oscillator; characterized but not tested | max 15 ns | 96 |
| OSC1 to CLOUT TosH2ckL | Note 1; RC mode where CLKOUT output is 4xTOSC | typ 75 · max 200 ns | 98 |
| OSC1 to CLOUT TosH2ckH | Note 1; RC mode where CLKOUT output is 4xTOSC | typ 75 · max 200 ns | 98 |
| CLKOUT rise time TckR | Note 1; RC mode where CLKOUT output is 4xTOSC | typ 35 · max 100 ns | 98 |
| CLKOUT fall time TckF | Note 1; RC mode where CLKOUT output is 4xTOSC | typ 35 · max 100 ns | 98 |
| CLKOUT to Port out valid TckL2ioV | Note 1; RC mode where CLKOUT output is 4xTOSC | max 20 ns | 98 |
| Port in hold after CLKOUT TckH2ioI | Note 1; RC mode where CLKOUT output is 4xTOSC | min 0 ns | 98 |
| OSC1 (Q1 cycle) to Port out valid TosH2ioV | Characterized but not tested | typ 50 · max 150 ns | 98 |
| OSC1 (Q1 cycle) to Port out valid TosH2ioV | Additional line; condition not stated in supplied text | max 300 ns | 98 |
| OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) TosH2ioI | min 100 ns | 98 | |
| Port input valid to OSC1 (I/O in setup time) TioV2osH | min 0 ns | 98 | |
| Port output rise time TioR | typ 10 · max 40 ns | 98 | |
| Port output fall time TioF | typ 10 · max 40 ns | 98 | |
| INT pin high or low time Tinp | min 25 ns | 98 | |
| Voltage on all other pins with respect to VSS | Maximum = VDD + 0.3V | min -0.3 V | 85 |
| Supply Voltage VDD | D001; PIC12F629/675 with A/D off; FOSC <= 4 MHz | min 2 · max 5.5 V | 88 |
| Supply Voltage VDD | D001C; 4 MHZ < FOSC <= 10 MHz | min 3 · max 5.5 V | 88 |
| RAM Data Retention Voltage(1) VDR | D002; Device in Sleep mode; characterized but not tested | min 1.5 V | 88 |
| VDD Rise Rate to ensure internal Power-on Reset signal SVDD | D004; characterized but not tested; see section on Power-on Reset for details | min 0.05 V/ms | 88 |
| VBOD VBOD | D005 | typ 2.1 V | 88 |
| Supply Current (IDD) IDD | D010; VDD = 2.0 V; FOSC = 32 kHz; LP Oscillator Mode | typ 9 · max 16 A | 89 |
| Supply Current (IDD) IDD | D010; VDD = 3.0 V; FOSC = 32 kHz; LP Oscillator Mode | typ 18 · max 28 A | 89 |
| Supply Current (IDD) IDD | D010; VDD = 5.0 V; FOSC = 32 kHz; LP Oscillator Mode | typ 35 · max 54 A | 89 |
| Supply Current (IDD) IDD | D011; VDD = 2.0 V; FOSC = 1 MHz; XT Oscillator Mode | typ 110 · max 150 A | 89 |
| Supply Current (IDD) IDD | D011; VDD = 3.0 V; FOSC = 1 MHz; XT Oscillator Mode | typ 190 · max 280 A | 89 |
| Supply Current (IDD) IDD | D011; VDD = 5.0 V; FOSC = 1 MHz; XT Oscillator Mode | typ 330 · max 450 A | 89 |
| Supply Current (IDD) IDD | D012; VDD = 2.0 V; FOSC = 4 MHz; XT Oscillator Mode | typ 220 · max 280 A | 89 |
| Supply Current (IDD) IDD | D012; VDD = 3.0 V; FOSC = 4 MHz; XT Oscillator Mode | typ 370 · max 650 A | 89 |
| Supply Current (IDD) IDD | D012; VDD = 5.0 V; FOSC = 4 MHz; XT Oscillator Mode | typ 0.6 · max 1.4 mA | 89 |
| Supply Current (IDD) IDD | D013; VDD = 2.0 V; FOSC = 1 MHz; EC Oscillator Mode | typ 70 · max 110 A | 89 |
| Supply Current (IDD) IDD | D013; VDD = 3.0 V; FOSC = 1 MHz; EC Oscillator Mode | typ 140 · max 250 A | 89 |
| Supply Current (IDD) IDD | D013; VDD = 5.0 V; FOSC = 1 MHz; EC Oscillator Mode | typ 260 · max 390 A | 89 |
| Supply Current (IDD) IDD | D014; VDD = 2.0 V; FOSC = 4 MHz; EC Oscillator Mode | typ 180 · max 250 A | 89 |
| Supply Current (IDD) IDD | D014; VDD = 3.0 V; FOSC = 4 MHz; EC Oscillator Mode | typ 320 · max 470 A | 89 |
| Supply Current (IDD) IDD | D014; VDD = 5.0 V; FOSC = 4 MHz; EC Oscillator Mode | typ 580 · max 850 A | 89 |
| Supply Current (IDD) IDD | D015; VDD = 2.0 V; FOSC = 4 MHz; INTOSC Mode | typ 340 · max 450 A | 89 |
| Supply Current (IDD) IDD | D015; VDD = 3.0 V; FOSC = 4 MHz; INTOSC Mode | typ 500 · max 700 A | 89 |
| Supply Current (IDD) IDD | D015; VDD = 5.0 V; FOSC = 4 MHz; INTOSC Mode | typ 0.8 · max 1.1 mA | 89 |
| Supply Current (IDD) IDD | D016; VDD = 2.0 V; FOSC = 4 MHz; EXTRC Mode | typ 180 · max 250 A | 89 |
| Supply Current (IDD) IDD | D016; VDD = 3.0 V; FOSC = 4 MHz; EXTRC Mode | typ 320 · max 450 A | 89 |
| Supply Current (IDD) IDD | D016; VDD = 5.0 V; FOSC = 4 MHz; EXTRC Mode | typ 580 · max 800 A | 89 |
| Supply Current (IDD) IDD | D017; VDD = 4.5 V; FOSC = 20 MHz; HS Oscillator Mode | typ 2.1 · max 2.95 mA | 89 |
| Supply Current (IDD) IDD | D017; VDD = 5.0 V; FOSC = 20 MHz; HS Oscillator Mode | typ 2.4 · max 3 mA | 89 |
| Power-down Base Current (IPD) IPD | D020; VDD = 2.0 V; WDT, BOD, Comparators, VREF, and T1OSC disabled | typ 0.99 · max 700 nA | 90 |
| Power-down Base Current (IPD) IPD | D020; VDD = 3.0 V; WDT, BOD, Comparators, VREF, and T1OSC disabled | typ 1.2 · max 770 nA | 90 |
| Power-down Base Current (IPD) IPD | D020; VDD = 5.0 V; WDT, BOD, Comparators, VREF, and T1OSC disabled | typ 2.9 · max 995 nA | 90 |
| WDT Current(1) | D021; VDD = 2.0 V | typ 0.3 · max 1.5 A | 90 |
| WDT Current(1) | D021; VDD = 3.0 V | typ 1.8 · max 3.5 A | 90 |
| WDT Current(1) | D021; VDD = 5.0 V | typ 8.4 · max 17 A | 90 |
| BOD Current(1) | D022; VDD = 3.0 V | typ 58 · max 70 A | 90 |
| BOD Current(1) | D022; VDD = 5.0 V | typ 109 · max 130 A | 90 |
| Comparator Current(1) | D023; VDD = 2.0 V | typ 3.3 · max 6.5 A | 90 |
| Comparator Current(1) | D023; VDD = 3.0 V | typ 6.1 · max 8.5 A | 90 |
| Comparator Current(1) | D023; VDD = 5.0 V | typ 11.5 · max 16 A | 90 |
| CVREF Current(1) | D024; VDD = 2.0 V | typ 58 · max 70 A | 90 |
| CVREF Current(1) | D024; VDD = 3.0 V | typ 85 · max 100 A | 90 |
| CVREF Current(1) | D024; VDD = 5.0 V | typ 138 · max 160 A | 90 |
| T1 OSC Current(1) | D025; VDD = 2.0 V | typ 4 · max 6.5 A | 90 |
| T1 OSC Current(1) | D025; VDD = 3.0 V | typ 4.6 · max 7 A | 90 |
| T1 OSC Current(1) | D025; VDD = 5.0 V | typ 6 · max 10.5 A | 90 |
| Input Low Voltage, I/O ports with TTL buffer VIL | D030; 4.5V ≤ VDD ≤ 5.5V; minimum = VSS | max 0.8 V | 93 |
| Input Low Voltage, OSC1 (XT and LP modes) VIL | D033; Note 1; minimum = VSS | max 0.3 V | 93 |
| Input High Voltage, I/O ports with TTL buffer VIH | D040; 4.5V ≤ VDD ≤ 5.5V; maximum = VDD | min 2 V | 93 |
| Input High Voltage, OSC1 (XT and LP modes) VIH | D043; Note 1; maximum = VDD | min 1.6 V | 93 |
| GPIO Weak Pull-up Current IPUR | D070; VDD = 5.0V, VPIN = VSS; limits characterized but not tested | min 50 · typ 250 · max 400 A | 93 |
| Output Low Voltage, I/O ports VOL | D080; IOL = 8.5 mA, VDD = 4.5V (Ind.) | max 0.6 V | 93 |
| Output Low Voltage, OSC2/CLKOUT (RC mode) VOL | D083; IOL = 1.6 mA, VDD = 4.5V (Ind.) | max 0.6 V | 93 |
| Capacitive Loading Specs on Output Pins, OSC2 pin COSC2 | D100; In XT, HS and LP modes when external clock is used to drive OSC1; characterized but not tested | max 15 pF | 94 |
| Capacitive Loading Specs on Output Pins, All I/O pins CIO | D101; characterized but not tested | max 50 pF | 94 |
| Data EEPROM Memory, VDD for Read/Write VDRW | D121; Using EECON to read/write; minimum = VMIN, minimum operating voltage | max 5.5 V | 94 |
| Data EEPROM Memory, Erase/Write cycle time TDEW | D122 | typ 5 · max 6 ms | 94 |
| Data EEPROM Memory, Characteristic Retention TRETD | D123; Provided no other specifications are violated | min 40 Year | 94 |
| Program Flash Memory, VDD for Read VPR | D131; minimum = VMIN, minimum operating voltage | max 5.5 V | 94 |
| Program Flash Memory, VDD for Erase/Write VPEW | D132 | min 4.5 · max 5.5 V | 94 |
| Program Flash Memory, Erase/Write cycle time TPEW | D133 | typ 2 · max 2.5 ms | 94 |
| Program Flash Memory, Characteristic Retention TRETD | D134; Provided no other specifications are violated | min 40 Year | 94 |
Open-source boards using it
2- 2 layers101.5 × 105.4 mm

- 2 layers101.5 × 88.1 mm

Parts like it
8ATTINY13A-SSU
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PIC12F1822-I/SN
SOIC-8-40℃~+85℃ 1.8V~5.5V 10bit 128Byte 256Byte 3.5KB 32MHz 5bit 6 8 Bit Built-in FLASH PIC SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATTINY202-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 2KB 6 64Byte 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PIC12F675-I/SN
SOIC-8-40℃~+85℃ 1.75KB 10bit 128Byte 20MHz 2V~5.5V 5 64Byte 8 Bit Built-in FLASH PIC SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PIC12F683-I/SN
SOIC-8-40℃~+85℃ 10bit 20MHz 256Byte 2V~5.5V 3.5KB 5 8 Bit Built-in FLASH PIC SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)STC15F104W-35I-SOP
SOIC-83.8V~5.5V 4KB 51 Family 6 FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSSTCMicrocontrollers (MCU/MPU/SOC)ATTINY412-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit 8bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ATTINY402-SSN
SOIC-8-40℃~+105℃ 1.8V~5.5V 10bit 128Byte 20MHz 256Byte 4KB 6 8 Bit AVR Built-in FLASH SOIC-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
Questions
Is there a KiCad symbol and footprint for the PIC12F629-I/SN?
Yes. The symbol is EasyEDA_Cloud:PIC12F629T-I_SN and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the PIC12F629-I/SN?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the PIC12F629-I/SN datasheet?
Microchip Technology publishes it: the Datasheet link on this page opens it.
Where can I order the PIC12F629-I/SN?
JLCPCB lists it as part C8226, with 1,386 in stock; the sellers' links on this page open their listings.
What can replace the PIC12F629-I/SN?
Parts like it in the library: the ATTINY13A-SSU by Microchip Technology, the PIC12F1822-I/SN by Microchip Technology, the ATTINY202-SSN by Microchip Technology and the PIC12F675-I/SN by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the PIC12F629-I/SN?
2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.