
Mora villogo
kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes

Diverse Bausätze
Tiny13-Nachtlicht is an open-source printed circuit board by darc-s09, from the darc-s09/bausaetze repository on GitHub. It is a 2-layer board of 28 × 32 mm with 9 parts on 9 nets, routed with 105 tracks and 12 vias.
It is built around the ATTINY13A-SSU. Its parts include 2 capacitors, 2 diodes, 2 connectors, 1 resistor and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Seit mehreren Jahren haben wir im Ortsverband verschiedene Bastelaktivitäten laufen, vorranging finden diese bei Veranstaltungen der "Technischen Sammlungen Dresden" statt, in deren Räumen sich unsere Klubstation DL0TSD befindet.
Während der Bausatz des LED-Thermometers sein eigenes Repository hier besitzt, hatten wir die Software und auch Dokumentation für andere Bausätze historisch auf einem privaten Openproject-Server gehostet. Von dort wurden sie hier nach Github migriert.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 nF | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | 100 Ω | Resistors_SMD:R_0805_HandSoldering | R1 |
| 1 | 2xAA | Battery:2xAA-standing | B1 |
| 1 | ATtiny13A-SSU | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03 | J1 |
| 1 | LED | LEDs:LED-5MM | D2 |
| 1 | PD333-3C/H0/L2 | LEDs:LED-5MM | D1 |
| 1 | Pin 1x3 | Pin_Headers:Pin_Header_Straight_1x03 | J2 |

kissadamfkut/mora_blinker
Simple LED blinker with ATtiny13A for educational purposes

dragonlock2/kicadboards
Offsite backup for the miscellaneous KiCad boards that don't fit elsewhere

ep092/TX5823
FPV Sender mit Kanalwahl und konfiguration über SPI. Integriertes OSD mit MAX7456 und Spannungswandlern für 5V, 3,3V und 12V über einen Eingangsspannungsbereich von 8V bis 25.2V.





Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.
It measures 28 × 32 mm and has 2 copper layers, 1.6 mm thick.
9 parts, built around the ATTINY13A-SSU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the darc-s09/bausaetze repository on GitHub, at the commit this page was made from: the board is Hardware/CAD/Nachtlicht/Tiny13-Nachtlicht.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask darc-s09 before reusing the design.