
UPduino v3.0
tinyvision-ai-inc/UPduino-v3.0
UPduino 3.0: new 4 layer layout, various other improvements
Boards in 27 GitHub repositories, designed in KiCad, that use the 93LC56BT-I/OT by Microchip Technology (-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 2Kbit 2MHz 6ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) SPI SOT-23-6 EEPROM ROHS). See how each wires it, with its parts, size, README and files; the 93LC56BT-I/OT’s symbol, footprint and pinout are on its own page.

tinyvision-ai-inc/UPduino-v3.0
UPduino 3.0: new 4 layer layout, various other improvements

rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)




chenzhuoyu/rainbow-board
ECP5 FPGA breakout board for Colorlight i5 / i9


SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics

the-mr-music/OrangeCanBreakout
Board to test the MCP2517 SPI CAN controller together with the Orange Pi Zero Plus 2





mikegoelzer/Homebrew-ECP5-SBC
Kicad files for homebrew hobbyist computer with custom RISC-V CPU

mmantawy-sees-ai/FTDI-FT4232H-PCB
New PCB that has the FTDI FT4232H Chip


PaulBichl/VibePCB-LA
A 16-channel, 100 MSa/s USB 2.0 HS logic analyzer: a Lattice ECP5 FPGA (CABGA-256 BGA) capturing into a 32 MB SDRAM (54-ball BGA), read out over an FT2232H. 98 x 64 mm, 6 layers.

Pongkemon01/Zeabus-Elec-Circuit-Peripheral_bridge
Bridge circuit for several peripheral

Pongkemon01/Zeabus-Elec-Circuit-Power_dist
Power Distributor for Zeabus 2017

sneakylizard123-4/FPGA_Board
It is built around the Lattice iCE40 FPGA, designed to be programmed over USB through the on-board FT232H. The SPI flash boots the bitstream on power-up.

usunwshineu/Low_Power_FPGA_PCB
A custom low-power FPGA development board based on the Lattice iCE40UP5K FPGA. The board was designed to provide FPGA processing capabilities together with power monitoring and common communication interfaces.


