Skip to the content
4 layers58.1 × 62.5 mmFirst try, the printed circuit board in 3D

A custom low-power FPGA development board based on the Lattice iCE40UP5K FPGA. The board was designed to provide FPGA processing capabilities together with power monitoring and common communication interfaces.

Size
58.1 × 62.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
136
Nets
97
Pads
460
Tracks, vias
1,126, 144
Pours
8
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Feb 2026
Updated
8 Oct 2026

Overview

First try is an open-source printed circuit board by usunwshineu, from the usunwshineu/Low_Power_FPGA_PCB repository on GitHub. It is a 4-layer board of 58.1 × 62.5 mm with 136 parts on 97 nets, routed with 1,126 tracks and 144 vias.

It is built around the ICE40UP5K-SG48I, INA226AIDGSR and FT232HL-REEL, with the W25Q32JVSSIQ, 93LC56BT-I/OT and ASE-12.000MHZ-LC-T among its other parts. Its parts include 45 capacitors, 31 resistors, 10 ICs, 9 connectors and 8 diodes. It belongs with the FPGA and CPLD boards of this library.

Main components

10

README

README.md

ICE40UP5K LOW POWER FPGA BOARD

PCB design

A custom low-power FPGA development board based on the Lattice iCE40UP5K FPGA. The board was designed to provide FPGA processing capabilities together with power monitoring and common communication interfaces.

The board contains:

  • ICE40UP5K FPGA
  • FTDI USB interface
  • 12MHz clock (used for both the FPGA and FTDI)
  • INA226 sensors for measuring power consumption
  • I2C and SPI mode 0 PMODs
  • SPI Flash memory
  • I/O pins
  • a reset button
  • 3 buttons
  • 4 LEDs and 1 RGB LED

For different SPI modes you can check this document.

The final assembled board: Assembled

PCB programming

I checked the functionality of the board by running some simple verilog and I used icestorm for creating the bitstream. You can check more about Project IceStorm here .

The commands I used were:

  • yosys -p "synth_ice40 -top top -json module.json" module.v -> for synthesizing the verilog design
  • nextpnr-ice40 --up5k --package sg48 --json module.json --pcf pins.pcf --asc module.asc -> place-and-route
  • icepack module.asc module.bin -> converting the result into binary bitstream
  • iceprog module.bin -> programming the SPI Flash

Replace module.v, module.json, module.asc, module.bin, and pins.pcf with the corresponding filenames for your design.

Adding a microprocessor

I used this particular RISC V system, which was built specifically for iCE40UP5k FPGAs: up5k_riscv.

I modified the icestorm/up5k_riscv.pcf file with my own pins. Any other modified files were added to this repository. In main.c file I wrote a code to read the power consumption (using I2C communication with the INA226 sensors) and display it on an OLED (SPI communication).

This provides a complete demonstration of the board's:

  • RISC V processing system
  • I2C communication
  • SPI communication
  • Power monitoring
  • OLED display interface

Parts

136
QtyValueFootprintReferences
20100nFPCM_JLCPCB:C_0603C1, C10, C23, C24, C25, C27, C28, C29, C30, C35, C37, C38, C39, C46, C48, C50 +4
18TestPointTestPoint:TestPoint_Pad_1.0x1.0mmTP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20 +2
1110kΩPCM_JLCPCB:R_0603R8, R13, R14, R14, R15, R18, R20, R26, R32, R36, R37
114.7uFPCM_JLCPCB:C_0603C2, C22, C31, C32, C33, C34, C47, C49, C51, C53, C56
747uFPCM_JLCPCB:C_1206C5, C40, C41, C42, C43, C44, C45
6Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J3, J5, J6, J7, J9
5324ΩPCM_JLCPCB:R_0603R10, R16, R25, R27, R29
43.3kΩPCM_JLCPCB:R_0603R7, R19, R22, R23
4LD274footprints:LED-SMD_L1.0-W0.5-RDD1, D2, D3, D5
4SW_Pushfootprints:SW_pushSW1, SW2, SW2, SW3
3777ΩPCM_JLCPCB:R_0402R9, R24, R28
210uPCM_JLCPCB:C_1206C19, C36
220mfootprints:R20mU10, U11
2360kΩPCM_JLCPCB:R_0603R12, R17
24.7uPCM_JLCPCB:C_0603C3, C20
25.1kΩPCM_JLCPCB:R_0603R1, R2
2BLM18HE152SN1DPCM_JLCPCB:L_0603L2, L4
2Conn_01x11Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_VerticalJ4, J10
2INA226AIDGSRfootprints:INA226U4, U5
11.4kPCM_JLCPCB:R_0603R6
1100ΩPCM_JLCPCB:R_0603R21
110uInductor_SMD:L_APV_ANR6045L1
110uPCM_JLCPCB:C_0603C21
112kΩPCM_JLCPCB:R_0603R5
12.2kΩPCM_JLCPCB:R_0603R11
12.2ufootprints:IND-SMD_L3.0-W3.0_LPS3015-222MLL6
122pFPCM_JLCPCB:C_0603C4
193LC56BT-I/OTfootprints:EEPROMU6
1ASE-12.000MHZ-LC-Tfootprints:ASE-3.2X2.5_ABROSC
1Dfootprints:D2V5D7
1EG1218footprints:SW_1218_EWISW7
1FT232HL-REELfootprints:FTDIU1
1GZ1608D601TFPCM_JLCPCB:L_0603L3
1ICE40UP5K-SG48Ifootprints:QFN48_L-ASC10_ICE40ULTRAPLUS_MACHXO2_LATU7
1Jumper_3_OpenConnector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_VerticalJP1
1LD274footprints:LED-SMD_L2.1-W1.0-FD_UMD960D6
1LD274PCM_JLCPCB:D_0805D4
1LED_ARBGfootprints:RGB_LEDC5393554
1SMAJ5.0Afootprints:SMAJD13
1SN74AUP2G125DCURfootprints:BufferU3
1TPS62026DRCRfootprints:Vreg3_3U2
1TYPE-611-T3-WConnector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01AJ1
1W25Q32JVSSIQfootprints:FLASHU8

The 133 most common of 136 parts.

Similar boards

  • 2 layers120 × 120 mmUSB FTDI FT4232H Chip, the printed circuit board in 3D

    USB FTDI FT4232H Chip

    mmantawy-sees-ai/FTDI-FT4232H-PCB

    New PCB that has the FTDI FT4232H Chip

    74 parts
  • 4 layers26 × 44 mmFramework oscilloscope, the printed circuit board in 3D

    Framework oscilloscope

    jlcjak/frameoscope

    oscilloscope expansion card / module for framework laptops

    87 parts87
  • 4 layers125 × 95 mmPrerouted, the printed circuit board in 3D

    Prerouted

    devbisme/ai-circuit-design-tests

    Tests of KiCad-related AI tools.

    179 parts10
  • 4 layers75 × 55 mmEos epu up5k, the printed circuit board in 3D

    Eos epu up5k

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    145 parts8MIT
  • 6 layers164.4 × 88 mmTVCS Dev, the printed circuit board in 3D

    TVCS Dev

    Mig-M27/Avionics-PCBs

    Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

    311 parts
  • 2 layers39.5 × 74.8 mmCoral Wave, the printed circuit board in 3D

    Coral Wave

    SmallCoral/Coral-Wave

    SAMD21E18A + WM8978 USB sound card with stereo headphone playback and microphone capture. KiCad hardware and firmware.

    54 parts
  • 4 layers82 × 40 mmGridfinity USB hub, the printed circuit board in 3D

    Gridfinity USB hub

    SK-Electronics-Consulting/electronics-widgets

    Small, Custom Tools for Electronics

    124 parts1
  • 4 layers70 × 70 mmBlue interface board, the printed circuit board in 3D

    Blue interface board

    BetzDrive/interface-board

    Power and signal conditioning board for the Betz Drive system

    130 parts5

Questions

How big is the First try PCB?

It measures 58.1 × 62.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the First try use?

136 parts, built around the ICE40UP5K-SG48I, INA226AIDGSR, FT232HL-REEL and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the First try KiCad files?

From the usunwshineu/Low_Power_FPGA_PCB repository on GitHub, at the commit this page was made from: the board is First_try.kicad_pcb and its schematic First_try.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the First try design in my own project?

Its repository states no licence, so its author keeps all rights: ask usunwshineu before reusing the design.