4 layers45 × 32 mm
Templog mainboard
Michael-Manning/E-Paper-Climate-Logger
Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.
68 parts457MIT
Boards using the 24LC512-I/P
45 boardsBoards in 37 GitHub repositories, designed in KiCad, that use the 24LC512-I/P by Microchip Technology (-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C PDIP-8-300mil EEPROM ROHS). See how each wires it, with its parts, size, README and files; the 24LC512-I/P’s symbol, footprint and pinout are on its own page.
- 4 layers79.5 × 64.5 mm
RP2350 Duel
OpenStickCommunity/Hardware
A collection of hardware designs by members of the OpenStickCommunity
45 parts338 - 2 layers99.7 × 80 mm
- 2 layers79.2 × 59.2 mm
- 2 layers64 × 39 mm
SigmaLink USBi
freeDSP/SigmaLink-USBi
The freeDSP SigmaLink USBi PROGRAMMER is an all-in-one real-time programming interface.
31 parts33CC-BY-SA-4.0 - 2 layers254 × 160 mm
- 2 layers156 × 66 mm
Dash 6.8
romioRN/Dash6.8-hardware
wifi name "service", password 12345678, connect to 192.167.4.1
152 parts11Apache-2.0 - 4 layers78 × 78 mm
- 2 layers17.8 × 53.3 mm
- 2 layers139.7 × 69.9 mm
- 2 layers115.8 × 85.9 mm
Pypilot mfd
pypilot/pypilot_mfd
lcd display for various types of marine data including nmea0183, signalk and pypilot
103 parts4 - 4 layers165.7 × 85 mm
Amplificateur Audio
HodearS/Projet_Sound_Bar_DIY
L'objectif de ce projet est de réaliser une barre de son DIY compatible Dolby Atmos. Pour cela, la barre de son exploitera des architectures de chez Texas Instruments, à la fois pour le processeur audio et la carte…
859 parts2 - 2 layers50 × 100 mm
- 2 layers47.5 × 47.5 mm
- 2 layers65.5 × 60.8 mm
Raspi pico christmas tree
jcksnvllxr80/raspi_pico_christmas_tree
This project was designed for a decorative Christmas tree made out of cedar which stands about two feet in height.
19 parts1 - 2 layers91.5 × 48.4 mm
Pdcharger 100W
NerdyProjects/PDbatCharger
A 100W PD3.2 Battery Charger for 4-13S Li battery packs with power bank function
97 parts1 - 2 layers61 × 53 mm
USB to Ethercat Adapter Board V.1.0
Sudeshpandit/USB-TO-EtherCAT-Adapter-Board
Designed a 2-layer PCB that converts USB to EtherCAT for industrial network communication. Worked on the complete design flow — schematic design, component selection, PCB layout, and routing in KiCad.
84 parts1 - 2 layers64 × 39 mm
- 2 layers80 × 80 mm
Projeto Final
alighieribot/lpc11u14-board-bringup
Board bring-up, hardware debugging & validation, and event-driven bare-metal firmware (ARM Cortex-M0 LPC11U14F) | UNIFEI PBLE02
64 partsMIT - 2 layers160 × 100.1 mm
- 2 layers86 × 58 mm
ProjetoPCI
giovanealbano/Hardware-Design-PBLE01
Hardware design project (Schematic & PCB Layout) developed in KiCad - PBLE01 UNIFEI.
58 parts - 2 layers80 × 50 mm
Samd51 gps alarm clock
KrHaaland/GNSS_Alarm_Clock
GNSS-synchronized alarm clock — custom SAMD51J20A board with nPM1300 Li-ion power (USB-C), offline timezone+DST from coordinates, LVGL 9 on a 428x142 TFT, WAV alarm tunes over USB, battery-backed RTC
162 parts - 4 layers99.4 × 107.3 mm
- 4 layers99 × 90 mm
