

Dash 6.8
wifi name "service", password 12345678, connect to 192.167.4.1
- Size
- 156 × 66 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 152
- Nets
- 245
- Pads
- 755
- Tracks, vias
- 1,838, 629
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 13 Mar 2024
- Updated
- 1 Oct 2025
Overview
Dash 6.8 is an open-source printed circuit board by romioRN, from the romioRN/Dash6.8-hardware repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 156 × 66 mm with 152 parts on 245 nets, routed with 1,838 tracks and 629 vias.
It is built around the TJA1051T/3/1, ESP32-S3-WROOM-1-N8 and W25Q32JVSSIQ, with the 24LC512-I/P, AMS1117-3.3 and ILD207T among its other parts. Its parts include 74 capacitors, 38 resistors, 14 ICs, 6 diodes and 6 connectors. It belongs with the ESP32 and STM32 boards of this library.
Main components
12TJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH24LC512-I/P
PDIP-8-300mil-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C PDIP-8-300mil EEPROM ROHSMicrochip TechnologyEEPROMAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsILD207T
SO-8-150mil-55℃~+100℃ 1.2V 100% 2 200% 30mA 3us@2mA,100Ω 4.7us 400mV@2.5mA,10mA 4kV 6V 70V DC Phototransistor SO-8-150mil Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output OptoisolatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)W9825G6KH-6I
TSOPII-54-10.2mm-40℃~+85℃ 166MHz 256Mbit 3V~3.6V TSOPII-54-10.2mm SDRAM ROHSWinbond ElecSDRAMPESD1CAN-UX
SOT-323-55℃~+150℃ 150W@8/20us 1nA 2 24V 27.8V 3A@8/20us 50V 9.3pF Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-323 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)SRV05-4
SOT-23-6L-55℃~+150℃ 15V 1pF 4A 5V 5uA 6V 80W ESD Four channels IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-23-6L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)20279-001E-03
SMD-40℃~+90℃ 1 60V 9GHz Board Side IPEX Male Pin SMD Coaxial Connectors (RF) ROHSI-PEXCoaxial Connectors (RF)DMP3013SFV-7(ES)
PDFN-8L(3x3)PDFN-8L(3x3) MOSFETs ROHSElecSuperMOSFETs
README
readme.mdstm32f4
8MB RAM
flash
ESP32 S3 wifi calibration page
ATGM336H GPS with on-board battery
wifi name "service", password 12345678, connect to 192.167.4.1
2 layer PCB
single side assembly
nextPCB
hardware
-
GPS antenna 5v "GPS Antenna SMA Connector Car Mini GPS Receiver Antenna 3 Meters Cable Car GPS Antenna Receiver for Car Navigation Camera Player"
-
Пигтейл SMA female - MHF4 адаптер переходник для подключения внешней антенны Best Seller
-
ribbon cable FFC FPC 40 pin,Reverse Direction,5cm 0.5mm
-
threaded inserts M2xL4xOD3.2
-
m2 din912
pinout
-
pin 6 CANH
-
pin 8 GND
-
10 CANL
-
pin 12 12v
Firmware
https://github.com/romioRN/Dash6.8-firmware
precompiled F4 binaries at https://github.com/romioRN/Dash6.8-firmware/tree/main/Firmware/Debug
Parts
152| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C10, C11, C12, C13, C14, C15, C16, C32, C33, C34, C35, C38, C39 +18 |
| 17 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31 +1 |
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R9, R10, R11, R12, R25, R29, R30, R35, R38 |
| 7 | 10u 35v | Capacitor_SMD:C_0805_2012Metric | C52, C53, C54, C55, C56, C57, C69 |
| 5 | 0R | Resistor_SMD:R_0603_1608Metric | R19, R20, R21, R27, R34 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric | C63, C64, C65, C66 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R32, R33, R36, R37 |
| 4 | TestPoint | Fiducial:Fiducial_0.5mm_Mask1.5mm | FD1, FD2, FD3, FD4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 10R | Resistor_SMD:R_0603_1608Metric | R16, R18 |
| 2 | 120 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 12K 1% | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C36, C37 |
| 2 | 2.4k | Resistor_SMD:R_0603_1608Metric | R24, R26 |
| 2 | 20p | Capacitor_SMD:C_0603_1608Metric | C46, C47 |
| 2 | 620 | Resistor_SMD:R_0603_1608Metric | R22, R23 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2, J6 |
| 2 | PESD1CAN-UX | Package_TO_SOT_SMD:SOT-323_SC-70 | D1, D2 |
| 2 | SRV05-4 | Package_TO_SOT_SMD:SOT-23-6 | D4, D5 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_EVQQ2 | SW1, SW2 |
| 2 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2, U3 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | 5v1, 12v1 |
| 1 | 1.2nF | Capacitor_SMD:C_0603_1608Metric | C61 |
| 1 | 100n 100v | Capacitor_SMD:C_0603_1608Metric | C49 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C67 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C45 |
| 1 | 2.2K 1% | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 2.7k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 20279-001E-03 | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J3 |
| 1 | 20K 1% | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 220 pF | Capacitor_SMD:C_0603_1608Metric | C62 |
| 1 | 220pF | Capacitor_SMD:C_0603_1608Metric | C60 |
| 1 | 24LC512 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U15 |
| 1 | 33nF | Capacitor_SMD:C_0603_1608Metric | C72 |
| 1 | 47nH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 5.6K | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 776262-1 | 776262-1:TE_776262-1 | J5 |
| 1 | 82k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U9 |
| 1 | AP64501SP-13 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias | U8 |
| 1 | Conn_01x40_MountingPin | FPC:F-FPC0M40P-C310 | J4 |
| 1 | DMP3013SFV-7 | Package_SON:Diodes_PowerDI3333-8 | Q1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1 | U5 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | ILD207T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U11 |
| 1 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U12 |
| 1 | MMBZ5242BLT3G | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | REF3333 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | SRN6045TA-3R3Y | Inductor_SMD:L_Bourns_SRN6045TA | L1 |
| 1 | STM32F429IITx | Package_QFP:LQFP-176_24x24mm_P0.5mm | U4 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_2.0x2.0mm | GND1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Tensility_54-00023_Vertical_CircularHoles | J1 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U7 |
| 1 | W9825G6KH-6I | Package_SO:TSOP-II-54_22.2x10.16mm_P0.8mm | U14 |
| 1 | schottky | Diode_SMD:D_SOD-123 | D3 |
| 1 | sm3r3703t01u | 776262-1:SM3R3703T01U | C68 |
| 1 | ~ | RF_GPS:SIM28ML | U10 |
Similar boards
- 4 layers230 × 84.9 mm

- 4 layers135 × 82.5 mm

- 4 layers162 × 115 mm

Fome mc
halbritt/fome-mc
FOME-MC integrated single-PCB motorcycle ECU (STM32H753 + 2x STM32F042 WBO)
514 parts1 - 4 layers110 × 100 mm

- 4 layers160 × 90 mm

- 2 layers134.3 × 80.6 mm

- 4 layers160 × 90 mm

- 4 layers160 × 90 mm

Questions
How big is the Dash 6.8 PCB?
It measures 156 × 66 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dash 6.8 use?
152 parts, built around the TJA1051T/3/1, ESP32-S3-WROOM-1-N8, W25Q32JVSSIQ and 24LC512-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dash 6.8 KiCad files?
From the romioRN/Dash6.8-hardware repository on GitHub, at the commit this page was made from: the board is Dash 6.8_V0.2/Dash 6.8.kicad_pcb and its schematic Dash 6.8_V0.1/Dash 6.8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dash 6.8 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).