Skip to the content
12345678

24LC512-I/P

Microchip TechnologyExtended

-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C PDIP-8-300mil EEPROM ROHS

Part id
microchip/24LC512-I/P
Category
EEPROM
Package
PDIP-8-300mil
Pins
8
In stock
75 at JLCPCB (C42048)
Used on
45 open-source boards

Overview

The 24LC512-I/P is an EEPROM made by Microchip Technology in a PDIP-8-300mil package with 8 pins. -40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C PDIP-8-300mil EEPROM ROHS.

PCBKit's library has its KiCad symbol (Memory_EEPROM:24LC512, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 75 are in stock at JLCPCB (part C42048). 45 open-source boards in 37 repositories on GitHub use it.

Symbol

1A02A13A24GND5SDA6SCL7WP8VCC
Memory_EEPROM:24LC512From KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the 24LC512-I/P
PinNameType
1A0Input
2A1Input
3A2Input
4GNDPower in
5SDAInput/output
6SCLInput
7WPInput
8VCCPower in

Open-source boards using it

45See all 45
  • 4 layers45 × 32 mmTemplog mainboard, the printed circuit board in 3D

    Templog mainboard

    Michael-Manning/E-Paper-Climate-Logger

    Firmware, PCB, and enclosure for the Weathergotchi E-Paper climate logger.

    68 parts457MIT
  • 4 layers79.5 × 64.5 mmRP2350 Duel, the printed circuit board in 3D

    RP2350 Duel

    OpenStickCommunity/Hardware

    A collection of hardware designs by members of the OpenStickCommunity

    45 parts338
  • 2 layers99.7 × 80 mmL Star, the printed circuit board in 3D

    L Star

    jacgoudsmit/L-Star

    Minimal 6502/Propeller Computer based on Propeddle

    52 parts57MIT
  • 2 layers79.2 × 59.2 mmGpstracker, the printed circuit board in 3D

    Gpstracker

    blemasle/gpstracker-pcb

    Connected GPS tracker PCB

    205 parts33MIT
  • 2 layers64 × 39 mmSigmaLink USBi, the printed circuit board in 3D

    SigmaLink USBi

    freeDSP/SigmaLink-USBi

    The freeDSP SigmaLink USBi PROGRAMMER is an all-in-one real-time programming interface.

    31 parts33CC-BY-SA-4.0
  • 2 layers254 × 160 mmDeck65, the printed circuit board in 3D

    Deck65

    and3rson/deck65

    Simple SBC based on 65c02s

    183 parts16GPL-3.0
  • 2 layers156 × 66 mmDash 6.8, the printed circuit board in 3D

    Dash 6.8

    romioRN/Dash6.8-hardware

    wifi name "service", password 12345678, connect to 192.167.4.1

    152 parts11Apache-2.0
  • 4 layers78 × 78 mmBEEIRON v0.0, the printed circuit board in 3D

    BEEIRON v0.0

    Krishnawa/BEEIRON

    A JBC soldering station

    136 parts7CC0-1.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the 24LC512-I/P?

Yes. The symbol is Memory_EEPROM:24LC512 and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the 24LC512-I/P?

PDIP-8-300mil, with 8 pins. Its footprint is drawn on this page.

Where is the 24LC512-I/P datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the 24LC512-I/P?

JLCPCB lists it as part C42048, with 75 in stock; the sellers' links on this page open their listings.

What can replace the 24LC512-I/P?

Parts like it in the library: the M24C02-WMN6TP by STMicroelectronics, the M24C02-RMN6TP by STMicroelectronics, the 24LC256T-I/SN by Microchip Technology and the CAT24C08WI-GT3 by onsemi. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the 24LC512-I/P?

45 boards in 37 repositories on GitHub; the most starred are listed on this page, with their KiCad files.