
M24C02-RMN6TP
STMicroelectronicsExtended
-40℃~+85℃ 1.8V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHS
- Part id
- st/M24C02-RMN6TP
- Category
- EEPROM
- Package
- SOIC-8
- Pins
- 8
- In stock
- 189,691 at JLCPCB (C83836)
- Used on
- 1 open-source board
Overview
The M24C02-RMN6TP is an EEPROM made by STMicroelectronics in a SOIC-8 package with 8 pins. -40℃~+85℃ 1.8V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Pro:M24C02-RMN6TP, from EasyEDA Pro) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 189,691 are in stock at JLCPCB (part C83836). 1 open-source board in 1 repository on GitHub use it.
Symbol
Footprint
From the datasheet
9- Supply, least
- 1.8 V · VCC, recommended operating min · p. 22
- Supply, most
- 5.5 V · VCC, recommended operating max · p. 22
- Supply, absolute maximum
- 6.5 V · VCC, absolute max · p. 21
- Works from
- -40 °C · TA, operating ambient min · p. 22
- Works up to
- 85 °C · TA, operating ambient max · p. 22
- Takes working
- 800 µA · VCC read current max, 1.8 V, 400 kHz · p. 25
- Takes asleep
- 1 µA · VCC standby current max, 1.8 V, device not selected · p. 25
- A pin gives at most
- 5 mA · SDA low DC output current absolute max · p. 21
- Data rate, most
- 400 kbit/s · I²C Fast-mode clock rate max · p. 27
What it is and has
11- EEPROM
- 2 Kbit (256 x 8 bit) · p. 38
- Interface
- I2C serial access · p. 38
- Page size
- 16 byte · p. 1
- Byte Write
- Within 5 ms · p. 1
- Page Write
- Within 5 ms · p. 1
- Read modes
- Random and sequential · p. 1
- Write protection
- Whole memory array · p. 1
- Protection
- Enhanced ESD/Latch-Up protection · p. 1
- Package
- SO8 (150 mil width) · p. 38
- Device grade
- Industrial, –40 to 85 °C · p. 38
- Plating technology
- ECOPACK2 (RoHS compliant) · p. 38
Specifications
60| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Ambient operating temperature | max 130 °C | 21 | |
| Storage temperature TSTG | min -65 · max 150 °C | 21 | |
| DC output current (SDA = 0) IOL | max 5 mA | 21 | |
| Input or output range VIO | min -0.5 · max 6.5 V | 21 | |
| Supply voltage VCC | min -0.5 · max 6.5 V | 21 | |
| Electrostatic pulse (Human Body model) VESD | Positive and negative pulses on different pin combinations; see note 3. | max 3000 V | 21 |
| Supply voltage VCC | M24C02-R | min 1.8 · max 5.5 V | 22 |
| Ambient operating temperature TA | M24C02-R | min -40 · max 85 °C | 22 |
| Operating clock frequency fC | M24C02-R | max 400 kHz | 22 |
| Load capacitance Cbus | max 100 pF | 22 | |
| SCL input rise/fall time, SDA input fall time | max 50 ns | 22 | |
| Input capacitance (SDA) CIN | Characterized only, not tested in production. | max 8 pF | 23 |
| Input capacitance (other pins) CIN | Characterized only, not tested in production. | max 6 pF | 23 |
| Input impedance (Ei, WC) ZL | VIN < 0.3 VCC; characterized only, not tested in production. | min 15 · max 70 kΩ | 23 |
| Input impedance (Ei, WC) ZH | VIN > 0.7 VCC; characterized only, not tested in production. | min 500 kΩ | 23 |
| Data retention | TA = 55 °C; products identified by process letter T. | min 200 Year | 23 |
| Supply current (Read) ICC | VCC = 1.8 V, fc= 400 kHz | max 0.8 mA | 25 |
| Supply current (Write) ICC0 | During tW; VCC = 1.8 V ≤ VCC ≤ 2.5 V; characterized only for devices identified by process letter T. | max 0.5 mA | 25 |
| Standby supply current ICC1 | Device not selected; VIN = VSS or VCC, VCC = 1.8 V. | max 1 uA | 25 |
| Input low voltage (SCL, SDA, WC) VIL | 2.5 V ≤ VCC | min -0.45 V | 25 |
| Input low voltage (SCL, SDA, WC) VIL | VCC < 2.5 V | min -0.45 V | 25 |
| Input high voltage (SCL, SDA) VIH | VCC < 2.5 V | max 6.5 V | 25 |
| Output low voltage VOL | IOL = 0.7 mA, VCC = 1.8 V | max 0.2 V | 25 |
| Supply current (Read) ICC | M24C02-R per Table 13 note 1; VCC = 5.5 V, fc = 400 kHz; 2 mA for devices identified by process letter G or S. | max 1 mA | 24 |
| Supply current (Read) ICC | M24C02-R per Table 13 note 1; VCC = 2.5 V, fc = 400 kHz. | max 1 mA | 24 |
| Supply current (Read) ICC | M24C02-R per Table 13 note 1; VCC = 5.5 V, fc = 400 kHz; devices identified by process letter G or S. | max 2 mA | 24 |
| Supply current (Write) ICC0 | M24C02-R per Table 13 note 1; during tW, 2.5 V ≤ VCC ≤ 5.5 V; characterized only for devices identified by process letter T. | max 0.5 mA | 24 |
| Standby supply current ICC1 | M24C02-R per Table 13 note 1; device not selected, VIN = VSS or VCC, VCC = 2.5 V. | max 2 uA | 24 |
| Standby supply current ICC1 | M24C02-R per Table 13 note 1; device not selected, VIN = VSS or VCC, VCC = 5.5 V. | max 3 uA | 24 |
| Input low voltage (SCL, SDA, WC) VIL | M24C02-R with 2.5 V ≤ VCC ≤ 5.5 V and -40 °C < TA < +85 °C, per Table 13 note 1. | min -0.45 V | 24 |
| Output low voltage VOL | M24C02-R per Table 13 note 1; IOL = 2.1 mA, VCC = 2.5 V or IOL = 3 mA, VCC = 5.5 V. | max 0.4 V | 24 |
| Clock frequency fC | max 400 kHz | 27 | |
| Clock pulse width high tCHCL | min 600 ns | 27 | |
| Clock pulse width low tCLCH | min 1300 ns | 27 | |
| SDA (out) fall time tQL1QL2 | Minimum with CL = 10 pF; characterized only, not tested in production. | min 20 · max 300 ns | 27 |
| Data in set up time tDXCH | min 100 ns | 27 | |
| Data in hold time tCLDX | min 0 ns | 27 | |
| Data out hold time tCLQX | min 100 ns | 27 | |
| Clock low to next data valid (access time) tCLQV | Rbus × Cbus time constant within Figure 11 values. | max 900 ns | 27 |
| Start condition setup time tCHDL | min 600 ns | 27 | |
| Start condition hold time tDLCL | min 600 ns | 27 | |
| Stop condition set up time tCHDH | min 600 ns | 27 | |
| Time between Stop condition and next Start condition tDHDL | min 1300 ns | 27 | |
| Write time tW | max 5 ms | 27 | |
| Pulse width ignored (input filter on SCL and SDA) - single glitch tNS | Characterized only, not tested in production. | max 100 ns | 27 |
| Clock frequency fC | Values recommended by the I2C bus Standard-mode specification. | max 100 kHz | 28 |
| Clock pulse width high tCHCL | Values recommended by the I2C bus Standard-mode specification. | min 4 us | 28 |
| Clock pulse width low tCLCH | Values recommended by the I2C bus Standard-mode specification. | min 4.7 us | 28 |
| Input signal rise time tXH1XH2 | Values recommended by the I2C bus Standard-mode specification. | max 1 us | 28 |
| Input signal fall time tXL1XL2 | Values recommended by the I2C bus Standard-mode specification. | max 300 ns | 28 |
| SDA fall time tQL1QL2 | Characterized only; Standard-mode recommended values. | max 300 ns | 28 |
| Data in setup time tDXCH | Values recommended by the I2C bus Standard-mode specification. | min 250 ns | 28 |
| Data in hold time tCLDX | Values recommended by the I2C bus Standard-mode specification. | min 0 ns | 28 |
| Data out hold time tCLQX | Values recommended by the I2C bus Standard-mode specification. | min 200 ns | 28 |
| Clock low to next data valid (access time) tCLQV | Standard-mode recommended values; Rbus × Cbus time constant within Figure 11 values. | max 3450 ns | 28 |
| Start condition setup time tCHDL | For a reStart condition, or following a Write cycle; Standard-mode recommended values. | min 4.7 us | 28 |
| Start condition hold time tDLCL | Values recommended by the I2C bus Standard-mode specification. | min 4 us | 28 |
| Stop condition setup time tCHDH | Values recommended by the I2C bus Standard-mode specification. | min 4 us | 28 |
| Time between Stop condition and next Start condition tDHDL | Values recommended by the I2C bus Standard-mode specification. | min 4.7 us | 28 |
| Pulse width ignored (input filter on SCL and SDA), single glitch tNS | Characterized only. | max 100 ns | 28 |
Open-source boards using it
1- 2 layers84.5 × 30 mm

Parts like it
8M24C02-WMN6TP
SOIC-8-40℃~+85℃ 2.5V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROM24LC256T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMCAT24C08WI-GT3
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 Years 400kHz 5ms 8Kbit Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSonsemiEEPROMM24C32-WMN6TP
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 32Kbit 40 Years 400kHz 5ms Hardware write protection function、Built-in power-on reset (POR)、Built-in error correction code (ECC) function I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROM24LC512T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROM24LC64T-I/SN
SOIC-8-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 5ms 64Kbit Hardware write protection function、Noise suppression function I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROMM24C02-FMN6TP
SOIC-8-40℃~+85℃ 1.7V~5.5V 200 Years 2Kbit 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROMM24C16-RMN6TP
SOIC-8-40℃~+85℃ 1.8V~5.5V 16Kbit 200 Years 4,000,000 Cycles 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSSTMicroelectronicsEEPROM
Questions
Is there a KiCad symbol and footprint for the M24C02-RMN6TP?
Yes. The symbol is EasyEDA_Pro:M24C02-RMN6TP and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the M24C02-RMN6TP?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the M24C02-RMN6TP datasheet?
STMicroelectronics publishes it: the Datasheet link on this page opens it.
Where can I order the M24C02-RMN6TP?
JLCPCB lists it as part C83836, with 189,691 in stock; the sellers' links on this page open their listings.
What can replace the M24C02-RMN6TP?
Parts like it in the library: the M24C02-WMN6TP by STMicroelectronics, the 24LC256T-I/SN by Microchip Technology, the CAT24C08WI-GT3 by onsemi and the M24C32-WMN6TP by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the M24C02-RMN6TP?
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.