4 layers78 × 54.3 mm
4 layers78 × 78 mm
BEEIRON v0.0
Krishnawa/BEEIRON7A JBC soldering station
- Size
- 78 × 78 mm
- Copper layers
- 4
- Thickness
- 4 mm
- Parts
- 136
- Nets
- 81
- Pads
- 382
- Tracks, vias
- 803, 208
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 23 Oct 2021
- Updated
- 6 Feb 2022
Overview
BEEIRON v0.0 is an open-source printed circuit board by Krishnawa, from the Krishnawa/BEEIRON repository on GitHub, published under the CC0-1.0 licence. It is a 4-layer board of 78 × 78 mm with 136 parts on 81 nets, routed with 803 tracks and 208 vias.
It is built around the ATMEGA328P-AU, BTB26-600BRG and 24LC512-I/P, with the LP2985-33DBV, MAX31856 and MOC3020M among its other parts. Its parts include 42 resistors, 23 capacitors, 12 connectors, 8 ICs and 7 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
11
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
BTB26-600BRG
TOP-3-40℃~+125℃ 1.3V 1.55V 1W 25A 260A@60Hz 50mA 50mA 600V TOP-3 Thyristors (SCR)/Modules ROHSSTMicroelectronicsThyristors (SCR)/Modules
24LC512-I/P
PDIP-8-300mil-40℃~+85℃ 1,000,000 cycles 2.5V~5.5V 200 Years 400kHz 512Kbit 5ms Hardware write protection function、Noise suppression function I2C PDIP-8-300mil EEPROM ROHSMicrochip TechnologyEEPROM
LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MAX31856
UncategorisedMaxim Integrated (Analog Devices)
MOC3020M
DIP-6-40℃~+85℃ 1 1.15V 4.17kV 400V 60mA No TRIAC DIP-6 Triac, SCR Output Optoisolators ROHSonsemiTriac, SCR Output Optoisolators
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
DB107S
DBS-55℃~+150℃ 1.1V@1A 10uA@1kV 1A 1kV 30A Single-Phase Rectifier DBS Bridge Rectifiers ROHSMDDBridge Rectifiers
B5819W
SOD-123-55℃~+125℃ 1.5A 1mA@40V 25A 40V 600mV@1A Standalone SOD-123 Schottky Diodes ROHSMDDSchottky Diodes
CD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching Diodes
S3216000091060JY
SMD3225-4P-40℃~+85℃ 16MHz 60Ω 9pF Crystal Oscillator ±10ppm SMD3225-4P Crystals ROHSJGHCCrystals
README
README.mdBEEIRON
A JBC soldering station
You can see the BOM file by clicking here
Parts
136| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R10, R11, R12, R13, R18, R20, R22, R24, R26, R28, R36, R37, R38, R39, R40 |
| 8 | 100 | Resistor_SMD:R_0805_2012Metric | R14, R15, R16, R30, R31, R33, R41, R42 |
| 8 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12 |
| 7 | 100n | Capacitor_SMD:C_0805_2012Metric | C8, C9, C10, C11, C14, C21, C23 |
| 7 | 2.2K | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7 |
| 6 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | K10K | Resistor_SMD:R_0805_2012Metric | R19, R21, R23, R25, R27, R29 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C5, C15, C16 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 10nF | Capacitor_SMD:C_0805_2012Metric | C17, C18, C19 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric | C3, C4, C22 |
| 2 | 10n | Capacitor_SMD:C_0805_2012Metric | C2, C6 |
| 2 | 14p | Capacitor_SMD:C_0805_2012Metric | C12, C13 |
| 2 | DB107S | DB107S:DIOB_DB107S | BR1, BR2 |
| 2 | SUPPLY_OUT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10, J11 |
| 1 | 0.53u | Capacitor_THT:C_Disc_D9.0mm_W5.0mm_P10.00mm | C20 |
| 1 | 100Ω @ 100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 10M | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 220 | Resistor_SMD:R_0805_2012Metric | R34 |
| 1 | 24LC512 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | 2E/2W | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P7.62mm_Vertical | R32 |
| 1 | 3.9K | Resistor_SMD:R_0805_2012Metric | R35 |
| 1 | 4.8V | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D3 |
| 1 | 4N25 | Package_DIP:DIP-6_W7.62mm | U9 |
| 1 | 50 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | A0 | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | A1 | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | A2 | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP4 |
| 1 | ACS712xLCTR-20A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | ADC | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J9 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U5 |
| 1 | B5819W | Diode_SMD:D_SOD-123 | D1 |
| 1 | BTB26-600 | Package_TO_SOT_THT:TO-3P-3_Vertical | Q7 |
| 1 | CD1206-S01575 | Diode_SMD:D_1206_3216Metric | D2 |
| 1 | C_Polarized | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C7 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Male | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical | J12 |
| 1 | G*** | kibuzzard-6198C8A0 | kibuzzard-6198C8A0 |
| 1 | G*** | kibuzzard-619F1F9A | kibuzzard-619F1F9A |
| 1 | G*** | kibuzzard-6198C8D5 | kibuzzard-6198C8D5 |
| 1 | G*** | kibuzzard-6198C8AE | kibuzzard-6198C8AE |
| 1 | G*** | kibuzzard-6198C8F1 | kibuzzard-6198C8F1 |
| 1 | G*** | kibuzzard-619F1F8F | kibuzzard-619F1F8F |
| 1 | G*** | kibuzzard-619F1F60 | kibuzzard-619F1F60 |
| 1 | G*** | kibuzzard-6198C929 | kibuzzard-6198C929 |
| 1 | G*** | kibuzzard-6198C887 | kibuzzard-6198C887 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | ISP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J7 |
| 1 | L | LED_SMD:LED_0603_1608Metric | DL1 |
| 1 | L | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | LOGO | FOOTPRINT:IRON | G*** |
| 1 | LOGO | FOOTPRINT:LOGO V0.0 | G*** |
| 1 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MAX31856 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U7 |
| 1 | MOC3020M | Package_DIP:DIP-6_W7.62mm_LongPads | U8 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | ON | LED_SMD:LED_0603_1608Metric | DON1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | ROTARY | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | RXD | LED_SMD:LED_0603_1608Metric | RXD1 |
| 1 | Resetable Fuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | S3216000091060JY | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | SPI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | Soldering Conn | Connector_Phoenix_MSTB:PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_Vertical | J8 |
| 1 | TXD | LED_SMD:LED_0603_1608Metric | TXD1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_2.5x2.5mm | TP1 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Varistor | Varistor:RV_Disc_D12mm_W5.1mm_P7.5mm | RV1 |
| 1 | WP | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
The 135 most common of 136 parts.
Questions
How big is the BEEIRON v0.0 PCB?
It measures 78 × 78 mm and has 4 copper layers, 4 mm thick.
What parts does the BEEIRON v0.0 use?
136 parts, built around the ATMEGA328P-AU, BTB26-600BRG, 24LC512-I/P and LP2985-33DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BEEIRON v0.0 KiCad files?
From the Krishnawa/BEEIRON repository on GitHub, at the commit this page was made from: the board is BEEIRON v0.0.4/BEEIRON v0.0.kicad_pcb and its schematic BEEIRON v0.0.4/BEEIRON v0.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BEEIRON v0.0 design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers54.4 × 63.7 mm
WiC64 Plugin
WiC64-Team/wic64-hardware
WiC64 WiFi Adapter schematics and gerber files
59 parts20CC-BY-4.0 - 2 layers139.2 × 95.6 mm
IGBT DRIVER
EmadBahra/open-source-IGBT-gate-driver
This is a beta version and it's not tested yet, so use it at your own risk under GPL v3
240 parts5 - 2 layers90 × 100 mm
Olivia control
AlterMundi-MonitoreoyControl/Proyecto-Incubadora
Is an innovative project aimed at enhancing the efficiency and productivity of poultry incubators in family farming.
51 parts4LGPL-2.1 - 2 layers60.3 × 49.5 mm
- 2 layers100 × 100 mm
ReflowOvenController
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
102 parts10BSD-3-Clause - 2 layers68.6 × 53.3 mm
Arduino Mega 2560
ded811/Mega-Uno-2560
An Arduino-compatible ATmega2560 development board in the Arduino Uno form factor
62 parts1 - 2 layers76 × 56 mm
