Boards in 57 GitHub repositories, designed in KiCad, that use the US1M by MDD (-55℃~+150℃ 1 Independent 1.65V@1A 1A 1kV 30A 5uA@1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHS). See how each wires it, with its parts, size, README and files; the US1M’s symbol, footprint and pinout are on its own page.
nordstream3/FOC
Date | Manufacturer | amount | includes | shipping & tax | price | -------- | -------- | -------- | -------- | -------- | -------- | 2024-01-17 | JLCPCB | 10 boards | All assembled excl fets and caps | YES, to EU |…
Millisman/EG8010
Collection of designs for the EG8010 (ASIC for single-phase SPWM control H-bridge)
andykarpov/nanit
Alternate PCB for NANIT project https://radiokot.ru/circuit/digital/measure/117/
hacklabkyiv/prismo-reader
RFID readers of Prismo access management system
felipeschmitt04/ecu-pic16f877a
Academic ECU project in C for the PIC16F877A, with Proteus simulation and KiCad PCB design.
AronASzucs/Avalanche32
Handheld ESP32-S3 Geiger counter with a firmware-regulated 400 V boost, SBM-20 tube, USB-C charging and OLED display.
oats-center/avena-rs
Avena On The Road: Bringing pavement health data to your fingertips
derlucae98/spr23e-bmu
Battery Management Unit for the Scuderia Mensa SPR23e/SPR24e electric race car
netrondev/netron_esp32_lora_ac
A mains current monitor built on an ESP32 and an SX1262 radio. It measures AC current through an ACS712 hall-effect sensor and reports it over LoRaWAN as an OTAA Class A device.
Thoric16/Power-Supply-Unit
A custom-designed robotics Power Supply Unit (PSU) featuring multi-rail buck regulation, remotely switchable outputs, current monitoring, and a hardware E-Stop loop.
TiebeDeclercq/Elektronica2-Labo-Opstelling
Complete printplaat met alle schakelingen van zowel gelijkrichting als opamps (Vives kortrijk)
atomicra1n/wifi-geiger-counter
A DIY Geiger counter PCB which can detect ionizing radiation and log readings over Wi-Fi. Built with an ESP32, and a HV multiplier circuit that steps up 3.7V to 400V for the GM tube.
cukier/EspCnc
Projeto de placa em KiCad (v9) para a interface entre um modulo ESP32 e a eletronica da CNC 3035: drivers de motor de passo (ex. A4988/DRV8825/TMC2208), fins-de-curso, controle de spindle/laser e alimentacao.
cukier/LoraProgrammer
Firmware ESP32 (ESP-IDF) para programar e configurar módulos de rádio LoRa, expondo a configuração através de um servidor HTTP em Wi-Fi (SoftAP/STA), acessível também via mDNS (http:// .local/).