
Llm kicad
fgihl/usb-c-one
Small one port USB-C hub, similar to YKUSH XS, but uses USB-C connectors

Smps is an open-source printed circuit board by bayavahmed, from the bayavahmed/PCB_LIBS repository on GitHub. It is a 2-layer board of 36.6 × 63.6 mm with 37 parts on 23 nets, routed with 121 tracks and 41 vias.
It is built around the TNY284DG, TNY284PG and 1N4148WS, with the LL4148, LTV-217D and MB10S among its other parts. Its parts include 13 capacitors, 11 resistors, 6 diodes, 3 ICs and 2 inductors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | 0_Personal:C_0603_1608Metric_Per | C4, C9, C13 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C8, C12 |
| 2 | 2MΩ | 0_Personal:R_0603_1608Metric_Per | R3, R4 |
| 1 | 1.58kΩ/%1 | 0_Personal:R_0603_1608Metric_Per | R10 |
| 1 | 100Ω/%1 | 0_Personal:R_0603_1608Metric_Per | R8 |
| 1 | 10kΩ | 0_Personal:R_0603_1608Metric_Per | R11 |
| 1 | 10nF | 0_Personal:C_0603_1608Metric_Per | C10 |
| 1 | 10nF/500V | 0_Personal:C_1206_3216Metric_Per | C2 |
| 1 | 10uF | 0_Personal:C_0805_2012Metric_Per | C6 |
| 1 | 10uF / 25V | 0_Personal:C_1206_3216Metric_Per | C3 |
| 1 | 10uF/4000VDC | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 16.9kΩ | 0_Personal:R_0603_1608Metric_Per | R2 |
| 1 | 1N4148WS | 0_Personal:SOD-323F_Per | D3 |
| 1 | 1kΩ | 0_Personal:R_0603_1608Metric_Per | R7 |
| 1 | 1mH/100mA | 0_Personal:L_6x6_SMD | L1 |
| 1 | 1uF | 0_Personal:C_0603_1608Metric_Per | C11 |
| 1 | 2.2nF/2000V | 0_Personal:CAP-Y1 10mm | C5 |
| 1 | 220kΩ | 0_Personal:R_1206_3216Metric_Per | R1 |
| 1 | 220Ω | 0_Personal:R_0603_1608Metric_Per | R6 |
| 1 | 22uH/0.7A | 0_Personal:L_6x6_SMD | L2 |
| 1 | 470pF | 0_Personal:C_0603_1608Metric_Per | C7 |
| 1 | 6.04kΩ/%1 | 0_Personal:R_0603_1608Metric_Per | R9 |
| 1 | 75Ω | 0_Personal:R_0603_1608Metric_Per | R5 |
| 1 | LED_RED | 0_Personal:LED_0603_1608Metric_Per | D5 |
| 1 | LL4148 | Diode_SMD:D_MiniMELF | D2 |
| 1 | LTV-217 | Package_SO_AKL:SO-4_4.4x2.3mm_P1.27mm | OC1 |
| 1 | MB10S | Diode_SMD_AKL:Diode_Bridge_MBS | D6 |
| 1 | SS26 | 0_Personal:D_SMA_Per | D4 |
| 1 | TL431DBZ | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | TNY284D | 0_Personal:TNY284D_SMD | U1 |
| 1 | TNY284PG | 0_Personal:TNY284PG | U2 |
| 1 | US1M | Diode_SMD:D_SMA | D1 |
| 1 | smps_trafo_3Winding_TNY284 | 0_Personal:SMPS_Trafo_3Winding - TNY284 | T1 |

fgihl/usb-c-one
Small one port USB-C hub, similar to YKUSH XS, but uses USB-C connectors



antmicro/kria-k26-devboard
Open source AMD Xilinx Kria UltraScale+ SoM baseboard

antmicro/snapdragon-845-baseboard
https://antmicro.com/blog/2022/04/open-source-snapdragon-845-baseboard/

gmeirelles-ops/esp32-DPTri
Firmware ESP-IDF para a DPSin Board WiFi Triac (rev v1.0.1): relé AC ON/OFF e dimmer TRIAC por porcentagem, controlados pelo app, com pareamento por hold ≥10 s no botão PAIR.

atwardzik/reflow_station_pcb
This project is currently in a prototype stage. It features PCB project of basic reflow station utilizing 4 phase-controlled triacs steering with attached heaters.

It measures 36.6 × 63.6 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the TNY284DG, TNY284PG, 1N4148WS and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bayavahmed/PCB_LIBS repository on GitHub, at the commit this page was made from: the board is KiCADLibrary/KiCadDeviceSheet/SMPS/smps.kicad_pcb and its schematic KiCADLibrary/KiCadDeviceSheet/SMPS/smps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bayavahmed before reusing the design.